From mboxrd@z Thu Jan 1 00:00:00 1970 From: Maxime Ripard Subject: Re: Allwinner A64: Issue on external rtc clock to wifi chip Date: Mon, 14 May 2018 09:57:27 +0200 Message-ID: <20180514075727.uxggyhmbahvhestx@flea> References: Reply-To: maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha256; protocol="application/pgp-signature"; boundary="kx3hdnajnzxhcs2n" Return-path: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Content-Disposition: inline In-Reply-To: List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Jagan Teki Cc: Chen-Yu Tsai , Michael Trimarchi , linux-sunxi , linux-kernel , linux-arm-kernel , devicetree List-Id: devicetree@vger.kernel.org --kx3hdnajnzxhcs2n Content-Type: text/plain; charset="UTF-8" Content-Disposition: inline Hi, On Mon, May 14, 2018 at 12:37:49PM +0530, Jagan Teki wrote: > Hi Maxime and All, > > We are trying to bring-up AP6330 Wifi chip for A64 board. We noticed > to have an external rtc clock has driven from wifi chip. > > So the devicetree is configured according to this as below. > > / { > wifi_pwrseq: wifi-pwrseq { > compatible = "mmc-pwrseq-simple"; > clocks = <&rtc 1>; > clock-names = "ext_clock"; > reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ > post-power-on-delay-ms = <400>; > }; > }; > > &rtc { > clock-output-names = "rtc-osc32k", "rtc-osc32k-out"; > clocks = <&osc32k>; > #clock-cells = <1>; > }; > > &mmc1 { > pinctrl-names = "default"; > pinctrl-0 = <&mmc1_pins>; > vmmc-supply = <®_dcdc1>; > vqmmc-supply = <®_eldo1>; > mmc-pwrseq = <&wifi_pwrseq>; > bus-width = <4>; > non-removable; > status = "okay"; > > brcmf: wifi@1 { > reg = <1>; > compatible = "brcm,bcm4329-fmac"; > interrupt-parent = <&r_pio>; > interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* WL-WAKE-AP: PL3 */ > interrupt-names = "host-wake"; > }; > }; > > And observed rtc-osc32k-out clock is never enabled[1] and the value of > LOSC_OUT_GATING is 0x0 which eventually not enabling > LOSC_OUT_GATING_EN > > Pls. let us know if we miss anything here? > > [1] https://paste.ubuntu.com/p/X2By4q8kD2/ Could you paste your config and the logs from a boot to? Thanks! Maxime -- Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com --kx3hdnajnzxhcs2n--