Re: [PATCH/RFT v3 0/3] thermal: add support for r8a77995

["Niklas Söderlund" <niklas.soderlund@ragnatech.se>]

Hi Ulrich,

On 2018-05-16 15:07:01 +0200, Ulrich Hecht wrote:
> On Wed, Apr 11, 2018 at 11:01 AM, jacopo mondi <jacopo@jmondi.org> wrote:
> > Hello Kaneko-san,
> >
> > On Tue, Apr 03, 2018 at 09:43:02PM +0900, Yoshihiro Kaneko wrote:
> >> This series adds thermal support for r8a77995.
> >> R-Car D3 (r8a77995) have a thermal sensor module which is similar to Gen2.
> >> Therefore this series adds r8a77995 support to rcar_thermal driver not
> >> rcar_gen3_thermal driver.
> >
> > I tested this on D3 Draak.
> >
> > I generated load expecting the detected temperature to rise.
> >
> > It took a while, and I only see a slight increase of the temperature
> > reported by the 'temp' attribute.
> 
> Pointing a heat gun at the SoC, I managed to get the temperature up to
> 80000, and it went back to 40000 when I removed it. I'd say this
> works.

I like your style! I contemplated using a hairdryer when testing some 
Gen3 thermal work but decided against it. Good too see others are not as 
weak minded as my self :-)

> 
> Tested-By: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
> 
> CU
> Uli

-- 
Regards,
Niklas S�derlund