From mboxrd@z Thu Jan 1 00:00:00 1970 From: Oleksij Rempel Subject: [PATCH v7 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option Date: Thu, 17 May 2018 07:50:14 +0200 Message-ID: <20180517055014.6607-7-o.rempel@pengutronix.de> References: <20180517055014.6607-1-o.rempel@pengutronix.de> Return-path: In-Reply-To: <20180517055014.6607-1-o.rempel@pengutronix.de> Sender: linux-kernel-owner@vger.kernel.org To: Shawn Guo , Mark Brown , "Rafael J. Wysocki" Cc: Oleksij Rempel , kernel@pengutronix.de, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org, Andrew Morton , Liam Girdwood , Leonard Crestez , Rob Herring , Mark Rutland , Michael Turquette , Stephen Boyd , Fabio Estevam , Russell King List-Id: devicetree@vger.kernel.org This board, as well as some other boards with i.MX6 and a PMIC, uses a "PMIC_STBY_REQ" line to notify the PMIC about a state change. The PMIC is programmed for a specific state change before triggering the line. In this case, PMIC_STBY_REQ can be used for stand by, sleep and power off modes. Signed-off-by: Oleksij Rempel --- arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 2e98c92adff7..a0e9753ee767 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -90,6 +90,10 @@ status = "okay"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -170,6 +174,7 @@ reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <16 8>; + fsl,pmic-stby-poweroff; regulators { reg_vddcore: sw1ab { /* VDDARM_IN */ -- 2.17.0