From mboxrd@z Thu Jan 1 00:00:00 1970 From: Daniel Mack Subject: [PATCH v2 1/3] input: touchscreen: edt-ft5x06: don't make device a wakeup source by default Date: Thu, 17 May 2018 11:05:50 +0200 Message-ID: <20180517090552.5704-2-daniel@zonque.org> References: <20180517090552.5704-1-daniel@zonque.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180517090552.5704-1-daniel@zonque.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: dmitry.torokhov@gmail.com, robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com Cc: devicetree@vger.kernel.org, Daniel Mack , linux-arm-kernel@lists.infradead.org, linux-input@vger.kernel.org List-Id: devicetree@vger.kernel.org Allow configuring the device as wakeup source through device properties, as not all platforms want to wake up on touch screen activity. The I2C core automatically reads the "wakeup-source" DT property to configure a device's wakeup capability, and board supports files can set I2C_CLIENT_WAKE in the flags. Signed-off-by: Daniel Mack --- Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt | 3 +++ drivers/input/touchscreen/edt-ft5x06.c | 1 - 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt index 025cf8c9324a..83f792d4d88c 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -52,6 +52,8 @@ Optional properties: - touchscreen-inverted-y : See touchscreen.txt - touchscreen-swapped-x-y : See touchscreen.txt + - wakeup-source: touchscreen acts as wakeup source + Example: polytouch: edt-ft5x06@38 { compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; @@ -62,4 +64,5 @@ Example: interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; + wakeup-source; }; diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 5bf63f76ddda..e18a2f215500 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -1007,7 +1007,6 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, goto err_remove_attrs; edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev)); - device_init_wakeup(&client->dev, 1); dev_dbg(&client->dev, "EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n", -- 2.14.3