Re: [v4 07/11] dt-bindings: hwmon: Add documents for PECI hwmon client drivers

[Rob Herring <robh@kernel.org>]

On Mon, May 21, 2018 at 12:59:05PM -0700, Jae Hyun Yoo wrote:
> This commit adds dt-bindings documents for PECI hwmon client drivers.
> 
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
> Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
> Reviewed-by: James Feist <james.feist@linux.intel.com>
> Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
> Cc: Andrew Jeffery <andrew@aj.id.au>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Jason M Biils <jason.m.bills@linux.intel.com>
> Cc: Joel Stanley <joel@jms.id.au>
> ---
>  .../bindings/hwmon/peci-cputemp.txt           | 23 ++++++++++++++++++
>  .../bindings/hwmon/peci-dimmtemp.txt          | 24 +++++++++++++++++++
>  2 files changed, 47 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/peci-cputemp.txt
>  create mode 100644 Documentation/devicetree/bindings/hwmon/peci-dimmtemp.txt
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/peci-cputemp.txt b/Documentation/devicetree/bindings/hwmon/peci-cputemp.txt
> new file mode 100644
> index 000000000000..2f59aee12d9e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/peci-cputemp.txt
> @@ -0,0 +1,23 @@
> +Bindings for Intel PECI (Platform Environment Control Interface) cputemp driver.
> +
> +Required properties:
> +- compatible : Should be "intel,peci-cputemp".
> +- reg        : Should contain address of a client CPU. Address range of CPU
> +	       clients is starting from 0x30 based on PECI specification.
> +
> +Example:
> +	peci-bus@0 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		< more properties >
> +
> +		peci-cputemp@30 {
> +			compatible = "intel,peci-cputemp";
> +			reg = <0x30>;
> +		};

[...]

> +		peci-dimmtemp@30 {
> +			compatible = "intel,peci-dimmtemp";
> +			reg = <0x30>;
> +		};

As I said in the prior version, 2 nodes at the same address is wrong.

Rob