From: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
To: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
andy.yeh@intel.com
Subject: Re: [PATCH v2 2/2] smiapp: Support the "upside-down" property
Date: Fri, 25 May 2018 15:41:59 +0200 [thread overview]
Message-ID: <20180525134159.ju7dz3dp7wtveswc@earth.universe> (raw)
In-Reply-To: <20180525122726.3409-3-sakari.ailus@linux.intel.com>
[-- Attachment #1: Type: text/plain, Size: 2426 bytes --]
Hi,
On Fri, May 25, 2018 at 03:27:26PM +0300, Sakari Ailus wrote:
> Use the "upside-down" property to tell that the sensor is mounted upside
> down. This reverses the behaviour of the VFLIP and HFLIP controls as well
> as the pixel order.
>
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> ---
Patch subject and description should be s/"upside-down"/"rotation"/g ?
> .../devicetree/bindings/media/i2c/nokia,smia.txt | 2 ++
> drivers/media/i2c/smiapp/smiapp-core.c | 16 ++++++++++++++++
> 2 files changed, 18 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
> index 33f10a94c381..6f509657470e 100644
> --- a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt
> @@ -29,6 +29,8 @@ Optional properties
> - reset-gpios: XSHUTDOWN GPIO
> - flash-leds: See ../video-interfaces.txt
> - lens-focus: See ../video-interfaces.txt
> +- rotation: Integer property; valid values are 0 (sensor mounted upright)
> + and 180 (sensor mounted upside down).
>
>
> Endpoint node mandatory properties
> diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c
> index e1f8208581aa..32286df6ab43 100644
> --- a/drivers/media/i2c/smiapp/smiapp-core.c
> +++ b/drivers/media/i2c/smiapp/smiapp-core.c
> @@ -2764,6 +2764,7 @@ static struct smiapp_hwconfig *smiapp_get_hwconfig(struct device *dev)
> struct v4l2_fwnode_endpoint *bus_cfg;
> struct fwnode_handle *ep;
> struct fwnode_handle *fwnode = dev_fwnode(dev);
> + u32 rotation;
> int i;
> int rval;
>
> @@ -2800,6 +2801,21 @@ static struct smiapp_hwconfig *smiapp_get_hwconfig(struct device *dev)
>
> dev_dbg(dev, "lanes %u\n", hwcfg->lanes);
>
> + rval = fwnode_property_read_u32(fwnode, "upside-down", &rotation);
"rotation"
> + if (!rval) {
> + switch (rotation) {
> + case 180:
> + hwcfg->module_board_orient =
> + SMIAPP_MODULE_BOARD_ORIENT_180;
> + /* Fall through */
> + case 0:
> + break;
> + default:
> + dev_err(dev, "invalid rotation %u\n", rotation);
> + goto out_err;
> + }
> + }
> +
> /* NVM size is not mandatory */
> fwnode_property_read_u32(fwnode, "nokia,nvm-size", &hwcfg->nvm_size);
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2018-05-25 13:42 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-25 12:27 [PATCH v2 0/2] Define rotation property for camera sensors Sakari Ailus
2018-05-25 12:27 ` [PATCH v2 1/2] dt-bindings: media: Define "rotation" property for sensors Sakari Ailus
2018-05-25 14:05 ` Sebastian Reichel
2018-05-31 3:33 ` Rob Herring
2018-05-25 12:27 ` [PATCH v2 2/2] smiapp: Support the "upside-down" property Sakari Ailus
2018-05-25 13:40 ` [PATCH v2.1 2/2] smiapp: Support the "rotation" property Sakari Ailus
2018-05-25 13:52 ` [PATCH v2.2 " Sakari Ailus
2018-05-25 14:09 ` Sebastian Reichel
2018-05-25 14:17 ` Sakari Ailus
2018-05-31 3:35 ` Rob Herring
2018-05-25 13:41 ` Sebastian Reichel [this message]
2018-05-25 13:52 ` [PATCH v2 2/2] smiapp: Support the "upside-down" property Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180525134159.ju7dz3dp7wtveswc@earth.universe \
--to=sebastian.reichel@collabora.co.uk \
--cc=andy.yeh@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).