From: Hans de Goede <hdegoede@redhat.com>
To: Marcel Holtmann <marcel@holtmann.org>,
Johan Hedberg <johan.hedberg@gmail.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
robh@kernel.org, Jeremy Cline <jeremy@jcline.org>,
linux-bluetooth@vger.kernel.org, linux-serial@vger.kernel.org,
linux-acpi@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 05/13] Bluetooth: btrtl: add support for the RTL8723BS and RTL8723DS chips
Date: Sun, 27 May 2018 21:04:49 +0200 [thread overview]
Message-ID: <20180527190457.2632-6-hdegoede@redhat.com> (raw)
In-Reply-To: <20180527190457.2632-1-hdegoede@redhat.com>
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
The Realtek RTL8723BS and RTL8723DS chipsets are SDIO wifi chips. They
also contain a Bluetooth module which is connected via UART to the host.
Realtek's userspace initialization tool (rtk_hciattach) differentiates
these two via the HCI version and revision returned by the
HCI_OP_READ_LOCAL_VERSION command.
Additionally we apply these checks only the for UART devices. Everything
else is assumed to be a "RTL8723B" which was originally supported by the
driver (communicating via USB).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/bluetooth/btrtl.c | 50 ++++++++++++++++++++++++++++++++++++---
1 file changed, 47 insertions(+), 3 deletions(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index bc56ef7fcac3..134eac0c8fe7 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -38,6 +38,8 @@
#define IC_MATCH_FL_LMPSUBV (1 << 0)
#define IC_MATCH_FL_HCIREV (1 << 1)
+#define IC_MATCH_FL_HCIVER (1 << 2)
+#define IC_MATCH_FL_HCIBUS (1 << 3)
#define IC_INFO(lmps, hcir) \
.match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV, \
.lmp_subver = (lmps), \
@@ -47,6 +49,8 @@ struct id_table {
__u16 match_flags;
__u16 lmp_subver;
__u16 hci_rev;
+ __u8 hci_ver;
+ __u8 hci_bus;
bool config_needed;
bool has_rom_version;
char *fw_name;
@@ -75,6 +79,18 @@ static const struct id_table ic_id_table[] = {
.fw_name = "rtl_bt/rtl8723a_fw.bin",
.cfg_name = NULL },
+ /* 8723BS */
+ { .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV | \
+ IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS,
+ .lmp_subver = RTL_ROM_LMP_8723B,
+ .hci_rev = 0xb,
+ .hci_ver = 6,
+ .hci_bus = HCI_UART,
+ .config_needed = true,
+ .has_rom_version = true,
+ .fw_name = "rtl_bt/rtl8723bs_fw.bin",
+ .cfg_name = "rtl_bt/rtl8723bs_config.bin" },
+
/* 8723B */
{ IC_INFO(RTL_ROM_LMP_8723B, 0xb),
.config_needed = false,
@@ -89,6 +105,18 @@ static const struct id_table ic_id_table[] = {
.fw_name = "rtl_bt/rtl8723d_fw.bin",
.cfg_name = "rtl_bt/rtl8723d_config.bin" },
+ /* 8723DS */
+ { .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV | \
+ IC_MATCH_FL_HCIVER | IC_MATCH_FL_HCIBUS,
+ .lmp_subver = RTL_ROM_LMP_8723B,
+ .hci_rev = 0xd,
+ .hci_ver = 8,
+ .hci_bus = HCI_UART,
+ .config_needed = true,
+ .has_rom_version = true,
+ .fw_name = "rtl_bt/rtl8723ds_fw.bin",
+ .cfg_name = "rtl_bt/rtl8723ds_config.bin" },
+
/* 8821A */
{ IC_INFO(RTL_ROM_LMP_8821A, 0xa),
.config_needed = false,
@@ -118,7 +146,8 @@ static const struct id_table ic_id_table[] = {
.cfg_name = "rtl_bt/rtl8822b_config.bin" },
};
-static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev)
+static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
+ u8 hci_ver, u8 hci_bus)
{
int i;
@@ -129,6 +158,12 @@ static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev)
if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIREV) &&
(ic_id_table[i].hci_rev != hci_rev))
continue;
+ if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIVER) &&
+ (ic_id_table[i].hci_ver != hci_ver))
+ continue;
+ if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIBUS) &&
+ (ic_id_table[i].hci_bus != hci_bus))
+ continue;
break;
}
@@ -480,6 +515,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev)
struct sk_buff *skb;
struct hci_rp_read_local_version *resp;
u16 hci_rev, lmp_subver;
+ u8 hci_ver;
int ret;
btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL);
@@ -500,14 +536,18 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev)
resp->hci_ver, resp->hci_rev,
resp->lmp_ver, resp->lmp_subver);
+ hci_ver = resp->hci_ver;
hci_rev = le16_to_cpu(resp->hci_rev);
lmp_subver = le16_to_cpu(resp->lmp_subver);
kfree_skb(skb);
- btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev);
+ btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, hci_ver,
+ hdev->bus);
+
if (!btrtl_dev->ic_info) {
bt_dev_err(hdev, "rtl: unknown IC info, lmp subver %04x, hci "
- "rev %04x", lmp_subver, hci_rev);
+ "rev %04x, hci ver %04x", lmp_subver, hci_rev,
+ hci_ver);
ret = -EINVAL;
goto err_free;
}
@@ -709,6 +749,10 @@ MODULE_LICENSE("GPL");
MODULE_FIRMWARE("rtl_bt/rtl8723a_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723b_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8723b_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723bs_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723bs_config.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin");
+MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin");
MODULE_FIRMWARE("rtl_bt/rtl8761a_config.bin");
MODULE_FIRMWARE("rtl_bt/rtl8821a_fw.bin");
--
2.17.0
next prev parent reply other threads:[~2018-05-27 19:04 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-27 19:04 [PATCH 00/13] Bluetooth: Add RTL8723BS support Hans de Goede
2018-05-27 19:04 ` [PATCH 01/13] dt-bindings: net: bluetooth: add support for Realtek Bluetooth chips Hans de Goede
2018-05-30 6:42 ` Marcel Holtmann
2018-05-30 8:04 ` Hans de Goede
2018-05-31 16:42 ` Rob Herring
2018-05-31 20:50 ` Hans de Goede
2018-06-04 10:17 ` Marcel Holtmann
2018-06-04 13:58 ` Hans de Goede
2018-06-04 19:11 ` Marcel Holtmann
2018-06-09 11:29 ` Hans de Goede
2018-06-11 13:32 ` Marcel Holtmann
2018-05-27 19:04 ` [PATCH 02/13] Bluetooth: btrtl: add MODULE_FIRMWARE declarations Hans de Goede
2018-05-27 19:04 ` [PATCH 03/13] Bluetooth: btrtl: split the device initialization into smaller parts Hans de Goede
2018-05-27 19:04 ` [PATCH 04/13] Bluetooth: btrtl: add support for retrieving the UART settings Hans de Goede
2018-05-30 12:14 ` [RFC PATCH] Bluetooth: btrtl: btrtl_convert_baudrate() can be static kbuild test robot
2018-05-30 12:14 ` [PATCH 04/13] Bluetooth: btrtl: add support for retrieving the UART settings kbuild test robot
2018-05-27 19:04 ` Hans de Goede [this message]
2018-05-27 19:04 ` [PATCH 06/13] Bluetooth: btrtl: load the config blob from devicetree when available Hans de Goede
2018-05-27 19:04 ` [PATCH 07/13] Bluetooth: hci_uart: Restore hci_dev->flush callback on open() Hans de Goede
2018-05-30 6:47 ` Marcel Holtmann
2018-05-27 19:04 ` [PATCH 08/13] Bluetooth: hci_serdev: Move serdev_device_close/open into common hci_serdev code Hans de Goede
2018-05-30 6:48 ` Marcel Holtmann
2018-05-27 19:04 ` [PATCH 09/13] Bluetooth: hci_serdev: Fix HCI_UART_INIT_PENDING not working Hans de Goede
2018-05-30 6:49 ` Marcel Holtmann
2018-05-30 13:25 ` Rob Herring
2018-05-30 17:31 ` Hans de Goede
2018-05-27 19:04 ` [PATCH 10/13] Bluetooth: hci_h5: Add support for serdev enumerated devices Hans de Goede
2018-05-27 19:04 ` [PATCH 11/13] Bluetooth: hci_h5: Add vendor setup, open, and close callbacks Hans de Goede
2018-05-27 19:04 ` [PATCH 12/13] Bluetooth: hci_h5: Add support for the RTL8723BS Hans de Goede
2018-05-30 7:40 ` kbuild test robot
2018-05-27 19:04 ` [PATCH 13/13] Bluetooth: hci_h5: Add support for enable and device-wake GPIOs Hans de Goede
2018-05-29 12:34 ` [PATCH 00/13] Bluetooth: Add RTL8723BS support Ian W MORRISON
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180527190457.2632-6-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=devicetree@vger.kernel.org \
--cc=jeremy@jcline.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).