From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Subject: Re: [PATCH] hwmon: binding: Fix "#cooling-cells" property's name Date: Tue, 29 May 2018 13:59:15 -0700 Message-ID: <20180529205915.GA18129@roeck-us.net> References: <9754c25e8459685d4919017dd7c8709cee7b89ce.1527224960.git.viresh.kumar@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <9754c25e8459685d4919017dd7c8709cee7b89ce.1527224960.git.viresh.kumar@linaro.org> Sender: linux-kernel-owner@vger.kernel.org To: Viresh Kumar Cc: Rob Herring , Mark Rutland , Vincent Guittot , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On Fri, May 25, 2018 at 10:49:57AM +0530, Viresh Kumar wrote: > It should be "#cooling-cells" instead of "cooling-cells". Fix it. > > Signed-off-by: Viresh Kumar Applied to hwmon-next after updating the subject. Thanks, Guenter > --- > Documentation/devicetree/bindings/hwmon/gpio-fan.txt | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt > index 439a7430fc68..2becdcfdc840 100644 > --- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt > +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt > @@ -11,7 +11,7 @@ Bindings for fan connected to GPIO lines > must have the RPM values in ascending order. > - alarm-gpios: This pin going active indicates something is wrong with > the fan, and a udev event will be fired. > -- cooling-cells: If used as a cooling device, must be <2> > +- #cooling-cells: If used as a cooling device, must be <2> > Also see: Documentation/devicetree/bindings/thermal/thermal.txt > min and max states are derived from the speed-map of the fan. > > -- > 2.15.0.194.g9af6a3dea062 >