From: Vasily Khoruzhick <anarsoul@gmail.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: Andre Przywara <andre.przywara@arm.com>
Subject: [PATCH 2/3] dts: sunxi: A64: Add PWM controllers
Date: Thu, 31 May 2018 23:29:00 -0700 [thread overview]
Message-ID: <20180601062901.8052-3-anarsoul@gmail.com> (raw)
In-Reply-To: <20180601062901.8052-1-anarsoul@gmail.com>
From: Andre Przywara <andre.przywara@arm.com>
The Allwinner A64 SoC features two PWM controllers, which are fully
compatible to the one used in the A13 and H3 chips.
Add the nodes for the devices (one for the "normal" PWM, the other for
the one in the CPUS domain) and the pins their outputs are connected to.
On the A64 the "normal" PWM is muxed together with one of the MDIO pins
used to communicate with the Ethernet PHY, so it won't be usable on many
boards. But the Pinebook laptop uses this pin for controlling the LCD
backlight.
On Pine64 the CPUS PWM pin however is routed to the "RPi2" header,
at the same location as the PWM pin on the RaspberryPi.
[vasily: fixed comment message as requested by Stefan Bruens]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> on Pinebook (only the "normal" PWM)
Tested-by: Harald Geyer <harald@ccbib.org> on Teres-I (only the "normal" PWM)
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index b5e903ccf0ec..e94bfa8477f6 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -365,6 +365,11 @@
bias-pull-up;
};
+ pwm_pin: pwm_pin {
+ pins = "PD22";
+ function = "pwm";
+ };
+
rmii_pins: rmii_pins {
pins = "PD10", "PD11", "PD13", "PD14", "PD17",
"PD18", "PD19", "PD20", "PD22", "PD23";
@@ -630,6 +635,15 @@
#interrupt-cells = <3>;
};
+ pwm: pwm@1c21400 {
+ compatible = "allwinner,sun50i-a64-pwm",
+ "allwinner,sun5i-a13-pwm";
+ reg = <0x01c21400 0x400>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
@@ -667,6 +681,15 @@
#size-cells = <0>;
};
+ r_pwm: pwm@1f03800 {
+ compatible = "allwinner,sun50i-a64-pwm",
+ "allwinner,sun5i-a13-pwm";
+ reg = <0x01f03800 0x400>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun50i-a64-r-pinctrl";
reg = <0x01f02c00 0x400>;
@@ -687,6 +710,11 @@
pins = "PL8", "PL9";
function = "s_i2c";
};
+
+ r_pwm_pin: pwm {
+ pins = "PL10";
+ function = "s_pwm";
+ };
};
r_rsb: rsb@1f03400 {
--
2.17.1
next prev parent reply other threads:[~2018-06-01 6:29 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-01 6:28 [PATCH 0/3] arm64: allwinner: a64: Add initial support for Pinebook Vasily Khoruzhick
2018-06-01 6:28 ` [PATCH 1/3] arm64: allwinner: a64: add R_I2C controller Vasily Khoruzhick
2018-06-01 9:16 ` Maxime Ripard
2018-06-01 17:30 ` Vasily Khoruzhick
2018-06-04 8:51 ` Maxime Ripard
2018-06-01 6:29 ` Vasily Khoruzhick [this message]
2018-06-01 9:18 ` [PATCH 2/3] dts: sunxi: A64: Add PWM controllers Maxime Ripard
2018-06-01 17:31 ` Vasily Khoruzhick
2018-06-01 6:29 ` [PATCH 3/3] arm64: dts: allwinner: add support for Pinebook Vasily Khoruzhick
2018-06-01 9:23 ` Maxime Ripard
2018-06-01 17:37 ` Vasily Khoruzhick
2018-06-04 8:49 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180601062901.8052-3-anarsoul@gmail.com \
--to=anarsoul@gmail.com \
--cc=andre.przywara@arm.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).