From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jae Hyun Yoo Subject: [PATCH linux-next v5 04/13] dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs Date: Fri, 1 Jun 2018 11:21:36 -0700 Message-ID: <20180601182136.23762-1-jae.hyun.yoo@linux.intel.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Jason M Biils , Rob Herring , Mark Rutland , Joel Stanley , Andrew Jeffery , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org Cc: Jae Hyun Yoo , Benjamin Herrenschmidt , Greg KH , Milton Miller II , Pavel Machek , Robin Murphy , Ryan Chen List-Id: devicetree@vger.kernel.org This commit adds a dt-bindings document of PECI adapter driver for ASPEED AST24xx/25xx SoCs. Signed-off-by: Jae Hyun Yoo Reviewed-by: Haiyue Wang Reviewed-by: James Feist Reviewed-by: Vernon Mauery Cc: Benjamin Herrenschmidt Cc: Greg KH Cc: Jason M Biils Cc: Milton Miller II Cc: Pavel Machek Cc: Robin Murphy Cc: Ryan Chen --- .../devicetree/bindings/peci/peci-aspeed.txt | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.txt diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.txt b/Documentation/devicetree/bindings/peci/peci-aspeed.txt new file mode 100644 index 000000000000..8c35f905589d --- /dev/null +++ b/Documentation/devicetree/bindings/peci/peci-aspeed.txt @@ -0,0 +1,57 @@ +Device tree configuration for PECI buses on the AST24XX and AST25XX SoCs. + +Required properties: +- compatible : Should be "aspeed,ast2400-peci" or "aspeed,ast2500-peci" + - aspeed,ast2400-peci: ASPEED AST2400 family PECI + controller + - aspeed,ast2500-peci: ASPEED AST2500 family PECI + controller +- reg : Should contain PECI controller registers location and + length. +- #address-cells : Should be <1> required to define a client address. +- #size-cells : Should be <0> required to define a client address. +- interrupts : Should contain PECI controller interrupt. +- clocks : Should contain clock source for PECI controller. Should + reference the external oscillator clock in the second + cell. +- resets : Should contain phandle to reset controller with the reset + number in the second cell. +- clock-frequency : Should contain the operation frequency of PECI controller + in units of Hz. + 187500 ~ 24000000 + +Optional properties: +- msg-timing : Message timing negotiation period. This value will + determine the period of message timing negotiation to be + issued by PECI controller. The unit of the programmed + value is four times of PECI clock period. + 0 ~ 255 (default: 1) +- addr-timing : Address timing negotiation period. This value will + determine the period of address timing negotiation to be + issued by PECI controller. The unit of the programmed + value is four times of PECI clock period. + 0 ~ 255 (default: 1) +- rd-sampling-point : Read sampling point selection. The whole period of a bit + time will be divided into 16 time frames. This value will + determine the time frame in which the controller will + sample PECI signal for data read back. Usually in the + middle of a bit time is the best. + 0 ~ 15 (default: 8) +- cmd-timeout-ms : Command timeout in units of ms. + 1 ~ 60000 (default: 1000) + +Example: + peci0: peci-bus@0 { + compatible = "aspeed,ast2500-peci"; + reg = <0x0 0x60>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <15>; + clocks = <&syscon ASPEED_CLK_GATE_REFCLK>; + resets = <&syscon ASPEED_RESET_PECI>; + clock-frequency = <24000000>; + msg-timing = <1>; + addr-timing = <1>; + rd-sampling-point = <8>; + cmd-timeout-ms = <1000>; + }; -- 2.17.0