From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
openbmc@lists.ozlabs.org
Cc: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>,
Jason M Biils <jason.m.bills@linux.intel.com>,
Ryan Chen <ryan_chen@aspeedtech.com>
Subject: [PATCH linux-next v5 05/13] ARM: dts: aspeed: peci: Add PECI node
Date: Fri, 1 Jun 2018 11:21:48 -0700 [thread overview]
Message-ID: <20180601182148.23806-1-jae.hyun.yoo@linux.intel.com> (raw)
This commit adds PECI bus/adapter node of AST24xx/AST25xx into
aspeed-g4 and aspeed-g5.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com>
Reviewed-by: James Feist <james.feist@linux.intel.com>
Reviewed-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Ryan Chen <ryan_chen@aspeedtech.com>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 26 ++++++++++++++++++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 26 ++++++++++++++++++++++++++
2 files changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 5e947ed496c2..5702f0cfd5f8 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -29,6 +29,7 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &vuart;
+ peci0 = &peci0;
};
cpus {
@@ -295,6 +296,13 @@
};
};
+ peci: peci@1e78b000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e78b000 0x60>;
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
@@ -338,6 +346,24 @@
};
};
+&peci {
+ peci0: peci-bus@0 {
+ compatible = "aspeed,ast2400-peci";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ clock-frequency = <24000000>;
+ msg-timing = <1>;
+ addr-timing = <1>;
+ rd-sampling-point = <8>;
+ cmd-timeout-ms = <1000>;
+ status = "disabled";
+ };
+};
+
&i2c {
i2c_ic: interrupt-controller@0 {
#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 24eec00c4a95..5741b841fddb 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -29,6 +29,7 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &vuart;
+ peci0 = &peci0;
};
cpus {
@@ -352,6 +353,13 @@
};
};
+ peci: peci@1e78b000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e78b000 0x60>;
+ };
+
uart2: serial@1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
@@ -395,6 +403,24 @@
};
};
+&peci {
+ peci0: peci-bus@0 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x0 0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ clock-frequency = <24000000>;
+ msg-timing = <1>;
+ addr-timing = <1>;
+ rd-sampling-point = <8>;
+ cmd-timeout-ms = <1000>;
+ status = "disabled";
+ };
+};
+
&i2c {
i2c_ic: interrupt-controller@0 {
#interrupt-cells = <1>;
--
2.17.0
reply other threads:[~2018-06-01 18:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180601182148.23806-1-jae.hyun.yoo@linux.intel.com \
--to=jae.hyun.yoo@linux.intel.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=jason.m.bills@linux.intel.com \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=ryan_chen@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).