From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jae Hyun Yoo Subject: [PATCH linux-next v5 07/13] dt-bindings: mfd: Add a document for PECI client mfd Date: Fri, 1 Jun 2018 11:22:16 -0700 Message-ID: <20180601182216.23894-1-jae.hyun.yoo@linux.intel.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Lee Jones , Mark Rutland , Rob Herring , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org Cc: Jae Hyun Yoo , Andrew Jeffery , James Feist , Jason M Biils , Joel Stanley , Vernon Mauery List-Id: devicetree@vger.kernel.org This commit adds a dt-bindings document for PECI client multi-function device. Signed-off-by: Jae Hyun Yoo Cc: Andrew Jeffery Cc: James Feist Cc: Jason M Biils Cc: Joel Stanley Cc: Vernon Mauery --- .../devicetree/bindings/mfd/peci-client.txt | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/peci-client.txt diff --git a/Documentation/devicetree/bindings/mfd/peci-client.txt b/Documentation/devicetree/bindings/mfd/peci-client.txt new file mode 100644 index 000000000000..4eb8f6bb6ca4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/peci-client.txt @@ -0,0 +1,23 @@ +* Intel PECI client bindings + +Required properties: +- compatible : Should be "intel,peci-client", "simple-mfd". +- reg : Should contain address of a client CPU. Address range of CPU + clients is starting from 0x30 based on PECI specification. + +Example: + peci-bus@0 { + #address-cells = <1>; + #size-cells = <0>; + < more properties > + + peci-client@30 { + compatible = "intel,peci-client", "simple-mfd"; + reg = <0x30>; + }; + + peci-client@31 { + compatible = "intel,peci-client", "simple-mfd"; + reg = <0x31>; + }; + }; -- 2.17.0