Re: [PATCH v3 4/8] dt-bindings: media: rcar-vin: Add 'data-enable-active'

["Niklas Söderlund" <niklas.soderlund@ragnatech.se>]

Hi Jacopo,

Thanks for your patch.

On 2018-05-29 17:05:55 +0200, Jacopo Mondi wrote:
> Describe optional endpoint property 'data-enable-active' for R-Car VIN.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
> v3:
> - new patch
> ---
> 
>  Documentation/devicetree/bindings/media/rcar_vin.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
> index 4d91a36..ff53226 100644
> --- a/Documentation/devicetree/bindings/media/rcar_vin.txt
> +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
> @@ -58,6 +58,8 @@ from local SoC CSI-2 receivers (port1) depending on SoC.
>        - Optional properties for endpoint nodes of port@0:
>          - hsync-active: see [1] for description. Default is active high.
>          - vsync-active: see [1] for description. Default is active high.
> +        - data-enable-active: polarity of CLKENB signal, see [1] for
> +          description. Default is active high.
> 
>          If both HSYNC and VSYNC polarities are not specified, embedded
>          synchronization is selected.
> --
> 2.7.4
> 

-- 
Regards,
Niklas Söderlund