From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v5 1/2] regulator: dt-bindings: add QCOM RPMh regulator bindings Date: Mon, 4 Jun 2018 09:56:10 -0500 Message-ID: <20180604145610.GA8926@rob-hp-laptop> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: David Collins Cc: broonie@kernel.org, lgirdwood@gmail.com, mark.rutland@arm.com, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, rnayak@codeaurora.org, sboyd@kernel.org, dianders@chromium.org List-Id: devicetree@vger.kernel.org On Fri, Jun 01, 2018 at 06:34:05PM -0700, David Collins wrote: > Introduce bindings for RPMh regulator devices found on some > Qualcomm Technlogies, Inc. SoCs. These devices allow a given > processor within the SoC to make PMIC regulator requests which > are aggregated within the RPMh hardware block along with requests > from other processors in the SoC to determine the final PMIC > regulator hardware state. > > Signed-off-by: David Collins > --- > .../bindings/regulator/qcom,rpmh-regulator.txt | 160 +++++++++++++++++++++ > .../dt-bindings/regulator/qcom,rpmh-regulator.h | 36 +++++ > 2 files changed, 196 insertions(+) > create mode 100644 Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt > create mode 100644 include/dt-bindings/regulator/qcom,rpmh-regulator.h Reviewed-by: Rob Herring