From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mathieu Malaterre Subject: [PATCH 1/3] MIPS: jz4780: Allow access to jz4740-i2s Date: Wed, 6 Jun 2018 21:38:08 +0200 Message-ID: <20180606193811.16007-1-malat@debian.org> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: James Hogan Cc: Mathieu Malaterre , Rob Herring , Mark Rutland , Ralf Baechle , Liam Girdwood , Mark Brown , Jaroslav Kysela , Takashi Iwai , devicetree@vger.kernel.org, linux-mips@linux-mips.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org List-Id: devicetree@vger.kernel.org Make it possible to select SND_JZ4740_SOC_I2S on MACH_JZ4780 Signed-off-by: Mathieu Malaterre --- sound/soc/jz4740/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig index 1a354a6b6e87..35d82d96e781 100644 --- a/sound/soc/jz4740/Kconfig +++ b/sound/soc/jz4740/Kconfig @@ -1,20 +1,20 @@ config SND_JZ4740_SOC - tristate "SoC Audio for Ingenic JZ4740 SoC" - depends on MACH_JZ4740 || COMPILE_TEST + tristate "SoC Audio for Ingenic JZ4740/JZ4780 SoC" + depends on MACH_JZ4740 || MACH_JZ4780 || COMPILE_TEST select SND_SOC_GENERIC_DMAENGINE_PCM help Say Y or M if you want to add support for codecs attached to - the JZ4740 I2S interface. You will also need to select the audio + the JZ4740/JZ4780 I2S interface. You will also need to select the audio interfaces to support below. if SND_JZ4740_SOC config SND_JZ4740_SOC_I2S - tristate "SoC Audio (I2S protocol) for Ingenic JZ4740 SoC" + tristate "SoC Audio (I2S protocol) for Ingenic JZ4740/JZ4780 SoC" depends on HAS_IOMEM help Say Y if you want to use I2S protocol and I2S codec on Ingenic JZ4740 - based boards. + or JZ4780 based boards. config SND_JZ4740_SOC_QI_LB60 tristate "SoC Audio support for Qi LB60" -- 2.11.0