From: Bastian Stender <bst@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>,
"Rafael J . Wysocki" <rjw@rjwysocki.net>,
Viresh Kumar <viresh.kumar@linaro.org>,
Zhang Rui <rui.zhang@intel.com>,
Leonard Crestez <leonard.crestez@nxp.com>
Cc: devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
linux-imx@nxp.com, Anson Huang <anson.huang@nxp.com>,
kernel@pengutronix.de, Anson Huang <Anson.Huang@nxp.com>
Subject: [PATCH RESEND 2/2] ARM: dts: imx: add cooling-cells for cpufreq cooling device
Date: Thu, 7 Jun 2018 11:51:05 +0200 [thread overview]
Message-ID: <20180607095105.5185-2-bst@pengutronix.de> (raw)
In-Reply-To: <20180607095105.5185-1-bst@pengutronix.de>
From: Anson Huang <Anson.Huang@nxp.com>
Add #cooling-cells for i.MX6/7 SoCs for cpufreq
cooling device usage.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
This is a resend of id:1526285359-17978-3-git-send-email-Anson.Huang@nxp.com
The rest of Huang's series was a duplicate of my original series and was
skipped (as requested by Huang) in favor of the prior v2 patch.
---
arch/arm/boot/dts/imx6dl.dtsi | 1 +
arch/arm/boot/dts/imx6q.dtsi | 1 +
arch/arm/boot/dts/imx6sl.dtsi | 1 +
arch/arm/boot/dts/imx6sx.dtsi | 1 +
arch/arm/boot/dts/imx6ul.dtsi | 1 +
arch/arm/boot/dts/imx7d.dtsi | 1 +
6 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 558bce81209d..b830dfd74ad3 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -39,6 +39,7 @@
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
clocks = <&clks IMX6QDL_CLK_ARM>,
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
<&clks IMX6QDL_CLK_STEP>,
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index ae7b3f107893..ac9f5cb65dec 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -44,6 +44,7 @@
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
clocks = <&clks IMX6QDL_CLK_ARM>,
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
<&clks IMX6QDL_CLK_STEP>,
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index ab6a7e2e7e8f..d35d4e93236a 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -65,6 +65,7 @@
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
<&clks IMX6SL_CLK_PLL1_SYS>;
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 49c7205b8db8..966e39a99792 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -83,6 +83,7 @@
198000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
clocks = <&clks IMX6SX_CLK_ARM>,
<&clks IMX6SX_CLK_PLL2_PFD2>,
<&clks IMX6SX_CLK_STEP>,
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 1241972b16ba..14b6ac78d323 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -66,6 +66,7 @@
device_type = "cpu";
reg = <0>;
clock-latency = <61036>; /* two CLK32 periods */
+ #cooling-cells = <2>;
operating-points = <
/* kHz uV */
696000 1275000
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 200714e3feea..4991371734d9 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -53,6 +53,7 @@
792000 975000
>;
clock-frequency = <996000000>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
--
2.17.1
next prev parent reply other threads:[~2018-06-07 9:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-07 9:51 [PATCH v2 1/2] cpufreq: imx6q/thermal: imx: register cooling device depending on OF Bastian Stender
2018-06-07 9:51 ` Bastian Stender [this message]
2018-06-07 10:15 ` [PATCH RESEND 2/2] ARM: dts: imx: add cooling-cells for cpufreq cooling device Bastian Stender
2018-06-08 7:22 ` [PATCH v2 1/2] cpufreq: imx6q/thermal: imx: register cooling device depending on OF kbuild test robot
2018-06-08 8:48 ` Bastian Stender
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180607095105.5185-2-bst@pengutronix.de \
--to=bst@pengutronix.de \
--cc=anson.huang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-imx@nxp.com \
--cc=linux-pm@vger.kernel.org \
--cc=rjw@rjwysocki.net \
--cc=rui.zhang@intel.com \
--cc=shawnguo@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).