From: Jagan Teki <jagan@amarulasolutions.com>
To: Thierry Reding <thierry.reding@gmail.com>,
David Airlie <airlied@linux.ie>,
dri-devel@lists.freedesktop.org, Shawn Guo <shawnguo@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sascha Hauer <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Fabio maggi <fabio.mauri@bticino.it>,
lamiaposta71@gmail.com,
Andrea CORTESE <andrea.cortese@bticino.it>,
Davide Bonfanti <davide.bonfanti@bticino.it>
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v2 1/4] drm/panel: simple: Add support for Rocktech RK070ER9427 LCD panel
Date: Thu, 7 Jun 2018 19:16:48 +0530 [thread overview]
Message-ID: <20180607134648.2902-1-jagan@amarulasolutions.com> (raw)
This adds support for the Rocktech Display Ltd. RK070ER9427
800(RGB)x480 TFT LCD panel, which can be supported by the
simple panel driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes for v2:
- collect Rob r-w-b tag
.../display/panel/rocktech,rk070er9427.txt | 25 ++++++++++++++++
drivers/gpu/drm/panel/panel-simple.c | 33 ++++++++++++++++++++++
2 files changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt b/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt
new file mode 100644
index 000000000000..eb1fb9f8d1f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,rk070er9427.txt
@@ -0,0 +1,25 @@
+Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "rocktech,rk070er9427"
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for LCD panel input.
+
+Example:
+ panel {
+ compatible = "rocktech,rk070er9427";
+ backlight = <&backlight_lcd>;
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index cbf1ab404ee7..a6c633fd0559 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -745,6 +745,36 @@ static const struct panel_desc avic_tm070ddh03 = {
},
};
+static const struct display_timing rocktech_rk070er9427_timing = {
+ .pixelclock = { 26400000, 33300000, 46800000 },
+ .hactive = { 800, 800, 800 },
+ .hfront_porch = { 16, 210, 354 },
+ .hback_porch = { 46, 46, 46 },
+ .hsync_len = { 1, 1, 1 },
+ .vactive = { 480, 480, 480 },
+ .vfront_porch = { 7, 22, 147 },
+ .vback_porch = { 23, 23, 23 },
+ .vsync_len = { 1, 1, 1 },
+ .flags = DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc rocktech_rk070er9427 = {
+ .timings = &rocktech_rk070er9427_timing,
+ .num_timings = 1,
+ .bpc = 6,
+ .size = {
+ .width = 154,
+ .height = 86,
+ },
+ .delay = {
+ .prepare = 41,
+ .enable = 50,
+ .unprepare = 41,
+ .disable = 50,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+};
+
static const struct drm_display_mode boe_nv101wxmn51_modes[] = {
{
.clock = 71900,
@@ -2226,6 +2256,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "qiaodian,qd43003c0-40",
.data = &qd43003c0_40,
+ }, {
+ .compatible = "rocktech,rk070er9427",
+ .data = &rocktech_rk070er9427,
}, {
.compatible = "samsung,lsn122dl01-c01",
.data = &samsung_lsn122dl01_c01,
--
2.14.3
next reply other threads:[~2018-06-07 13:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-07 13:46 Jagan Teki [this message]
2018-07-09 17:16 ` [PATCH v2 1/4] drm/panel: simple: Add support for Rocktech RK070ER9427 LCD panel Thierry Reding
-- strict thread matches above, loose matches on Subject: below --
2018-04-27 13:10 Jagan Teki
2018-04-27 20:12 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180607134648.2902-1-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=airlied@linux.ie \
--cc=andrea.cortese@bticino.it \
--cc=davide.bonfanti@bticino.it \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabio.estevam@nxp.com \
--cc=fabio.mauri@bticino.it \
--cc=kernel@pengutronix.de \
--cc=lamiaposta71@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michael@amarulasolutions.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=shyam.saini@amarulasolutions.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).