From: Jagan Teki <jagan@amarulasolutions.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Sascha Hauer <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Fabio maggi <fabio.mauri@bticino.it>,
lamiaposta71@gmail.com,
Andrea CORTESE <andrea.cortese@bticino.it>,
"davide . bonfanti" <davide.bonfanti@bticino.it>,
Shyam Saini <shyam.saini@amarulasolutions.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
Jagan Teki <jagan@amarulasolutions.com>,
Simone CIANNI <simone.cianni@bticino.it>,
Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Subject: [PATCH v2 3/4] ARM: dts: i.MX6: imx6dl-mamoj: Add Wifi support
Date: Thu, 7 Jun 2018 19:17:47 +0530 [thread overview]
Message-ID: <20180607134748.2970-2-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180607134748.2970-1-jagan@amarulasolutions.com>
Add TI WL18XX Wifi for BTicino i.MX6DL board.
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes for v2:
- collect Fabio r-w-b tag
arch/arm/boot/dts/imx6dl-mamoj.dts | 53 ++++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
index ed9050c5dbcc..5034b086035f 100644
--- a/arch/arm/boot/dts/imx6dl-mamoj.dts
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -133,6 +133,18 @@
enable-active-high;
vin-supply = <®_lcd_vgl>;
};
+
+ reg_wl18xx_vmmc: regulator-wl18xx-vmcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vwl1807";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
};
&fec {
@@ -285,6 +297,30 @@
status = "okay";
};
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <4>;
+ vmmc-supply = <®_wl18xx_vmmc>;
+ no-1-8-v;
+ non-removable;
+ wakeup-source;
+ keep-power-in-suspend;
+ cap-power-off-card;
+ max-frequency = <25000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+ tcxo-clock-frequency = <26000000>;
+ };
+};
+
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
@@ -392,6 +428,17 @@
>;
};
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10079
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069
+ >;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
@@ -406,4 +453,10 @@
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
>;
};
+
+ pinctrl_wlan: wlan {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x4001b0b0
+ >;
+ };
};
--
2.14.3
next prev parent reply other threads:[~2018-06-07 13:47 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-07 13:47 [PATCH v2 2/4] ARM: dts: i.MX6: imx6dl-mamoj: Add parallel display support Jagan Teki
2018-06-07 13:47 ` Jagan Teki [this message]
2018-06-19 2:44 ` [PATCH v2 3/4] ARM: dts: i.MX6: imx6dl-mamoj: Add Wifi support Shawn Guo
2018-06-07 13:47 ` [PATCH v2 4/4] ARM: dts: i.MX6: imx6dl-mamoj: Add usb host and device support Jagan Teki
2018-06-19 2:45 ` Shawn Guo
2018-06-19 2:41 ` [PATCH v2 2/4] ARM: dts: i.MX6: imx6dl-mamoj: Add parallel display support Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180607134748.2970-2-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=andrea.cortese@bticino.it \
--cc=davide.bonfanti@bticino.it \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=fabio.mauri@bticino.it \
--cc=kernel@pengutronix.de \
--cc=lamiaposta71@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michael@amarulasolutions.com \
--cc=raffaele.recalcati@bticino.it \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=shyam.saini@amarulasolutions.com \
--cc=simone.cianni@bticino.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).