From: Douglas Anderson <dianders@chromium.org>
To: andy.gross@linaro.org
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, rnayak@codeaurora.org,
linux-arm-msm@vger.kernel.org, Will Deacon <will.deacon@arm.com>,
Douglas Anderson <dianders@chromium.org>,
swboyd@chromium.org, David Brown <david.brown@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
kramasub@codeaurora.org, linux-arm-kernel@lists.infradead.org,
Catalin Marinas <catalin.marinas@arm.com>,
bjorn.andersson@linaro.org, linux-soc@vger.kernel.org,
sdharia@codeaurora.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] arm64: dts: qcom: sdm845: Enable debug UART and I2C10 on sdm845-mtp
Date: Thu, 7 Jun 2018 13:46:08 -0700 [thread overview]
Message-ID: <20180607204608.27688-2-dianders@chromium.org> (raw)
In-Reply-To: <20180607204608.27688-1-dianders@chromium.org>
The debug UART is very useful to have. I2C10 is enabled as an example
of a I2C port we can talk on for now. Eventually we'll want to put
peripherals under it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 52 +++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 979ab49913f1..e1eda143a725 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -12,4 +12,56 @@
/ {
model = "Qualcomm Technologies, Inc. SDM845 MTP";
compatible = "qcom,sdm845-mtp";
+
+ aliases {
+ serial0 = &uart9;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&i2c10 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&uart9 {
+ status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qup_i2c10_default {
+ pinconf {
+ pins = "gpio55", "gpio56";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_uart9_default {
+ pinconf-tx {
+ pins = "gpio4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-rx {
+ pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&qup_uart9_sleep {
+ pinconf {
+ pins = "gpio4", "gpio5";
+ bias-pull-down;
+ };
};
--
2.17.1.1185.g55be947832-goog
next prev parent reply other threads:[~2018-06-07 20:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-07 20:46 [PATCH 1/2] arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes Douglas Anderson
2018-06-07 20:46 ` Douglas Anderson [this message]
2018-06-12 5:01 ` [PATCH 2/2] arm64: dts: qcom: sdm845: Enable debug UART and I2C10 on sdm845-mtp Bjorn Andersson
2018-06-12 5:01 ` [PATCH 1/2] arm64: dts: qcom: sdm845: Add I2C, SPI, and UART9 nodes Bjorn Andersson
2018-06-12 5:22 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180607204608.27688-2-dianders@chromium.org \
--to=dianders@chromium.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kramasub@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=sdharia@codeaurora.org \
--cc=swboyd@chromium.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).