From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from metis.ext.pengutronix.de ([85.220.165.71]:45769 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750907AbeFHJHH (ORCPT ); Fri, 8 Jun 2018 05:07:07 -0400 From: Bastian Stender Subject: [PATCH v3 1/2] cpufreq: imx6q/thermal: imx: register cooling device depending on OF Date: Fri, 8 Jun 2018 11:06:39 +0200 Message-Id: <20180608090640.29076-1-bst@pengutronix.de> Sender: devicetree-owner@vger.kernel.org To: Shawn Guo , "Rafael J . Wysocki" , Viresh Kumar , Zhang Rui , Leonard Crestez Cc: devicetree@vger.kernel.org, linux-pm@vger.kernel.org, linux-imx@nxp.com, Anson Huang , kernel@pengutronix.de, Bastian Stender List-ID: The cooling device should be part of the i.MX cpufreq driver, but it cannot be removed for the sake of DT stability. So turn the cooling device registration into a separate function and perform the registration only if the CPU OF node does not have the #cooling-cells property. Use of_cpufreq_power_cooling_register in imx_thermal code to link the cooling device to the device tree node provided. This makes it possible to bind the cpufreq cooling device to a custom thermal zone via a cooling-maps entry like: cooling-maps { map0 { trip = <&board_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; Assuming a cpu node exists with label "cpu0" and #cooling-cells property. Signed-off-by: Bastian Stender --- Changes since v2: - replace of_cpufreq_power_cooling_register with of_cpufreq_cooling_register already handling capacitance/#cooling-cells properties Changes since implicit v1 ("cpufreq: imx6q/thermal: imx: move CPU cooling device from thermal to cpufreq", id:20171115092332.9320-1-bst@pengutronix.de): - create cooling device in imx_thermal in case no #cooling-cells property is available instead of removing it (DT stability) - fix indentation --- drivers/cpufreq/imx6q-cpufreq.c | 21 +++++++++++++++++++++ drivers/thermal/imx_thermal.c | 28 ++++++++++++++++++++++++---- 2 files changed, 45 insertions(+), 4 deletions(-) diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 83cf631fc9bc..a9259fb0302f 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -50,6 +51,7 @@ static struct clk_bulk_data clks[] = { }; static struct device *cpu_dev; +static struct thermal_cooling_device *cdev; static bool free_opp; static struct cpufreq_frequency_table *freq_table; static unsigned int max_freq; @@ -191,6 +193,16 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) return 0; } +static void imx6q_cpufreq_ready(struct cpufreq_policy *policy) +{ + cdev = of_cpufreq_cooling_register(policy); + + if (!cdev) + dev_err(cpu_dev, + "running cpufreq without cooling device: %ld\n", + PTR_ERR(cdev)); +} + static int imx6q_cpufreq_init(struct cpufreq_policy *policy) { int ret; @@ -202,13 +214,22 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy) return ret; } +static int imx6q_cpufreq_exit(struct cpufreq_policy *policy) +{ + cpufreq_cooling_unregister(cdev); + + return 0; +} + static struct cpufreq_driver imx6q_cpufreq_driver = { .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, .verify = cpufreq_generic_frequency_table_verify, .target_index = imx6q_set_target, .get = cpufreq_generic_get, .init = imx6q_cpufreq_init, + .exit = imx6q_cpufreq_exit, .name = "imx6q-cpufreq", + .ready = imx6q_cpufreq_ready, .attr = cpufreq_generic_attr, .suspend = cpufreq_generic_suspend, }; diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 334d98be03b9..cbfcca828cd7 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -3,6 +3,7 @@ // Copyright 2013 Freescale Semiconductor, Inc. #include +#include #include #include #include @@ -644,6 +645,27 @@ static const struct of_device_id of_imx_thermal_match[] = { }; MODULE_DEVICE_TABLE(of, of_imx_thermal_match); +/* + * Create cooling device in case no #cooling-cells property is available in + * CPU node + */ +static int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data) +{ + struct device_node *np = of_get_cpu_node(data->policy->cpu, NULL); + int ret; + + if (!np || !of_find_property(np, "#cooling-cells", NULL)) { + data->cdev = cpufreq_cooling_register(data->policy); + if (IS_ERR(data->cdev)) { + ret = PTR_ERR(data->cdev); + cpufreq_cpu_put(data->policy); + return ret; + } + } + + return 0; +} + static int imx_thermal_probe(struct platform_device *pdev) { struct imx_thermal_data *data; @@ -724,12 +746,10 @@ static int imx_thermal_probe(struct platform_device *pdev) return -EPROBE_DEFER; } - data->cdev = cpufreq_cooling_register(data->policy); - if (IS_ERR(data->cdev)) { - ret = PTR_ERR(data->cdev); + ret = imx_thermal_register_legacy_cooling(data); + if (ret) { dev_err(&pdev->dev, "failed to register cpufreq cooling device: %d\n", ret); - cpufreq_cpu_put(data->policy); return ret; } -- 2.17.1