From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: [PATCH 2/5] mfd: axp20x: Add self-working mode support for AXP806 Date: Wed, 20 Jun 2018 13:15:37 +0800 Message-ID: <20180620051540.25617-3-wens@csie.org> References: <20180620051540.25617-1-wens@csie.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180620051540.25617-1-wens@csie.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Maxime Ripard , Lee Jones , Rob Herring , Mark Rutland Cc: devicetree@vger.kernel.org, Andre Przywara , Chen-Yu Tsai , linux-arm-kernel@lists.infradead.org, Icenowy Zheng List-Id: devicetree@vger.kernel.org The AXP806 can operate in a standalone "self-working" mode, in which it is also responsible for power control of the overall system. This mode is similar to the master mode, but the EN/PWRON pin functions as a power button, instead of a level-triggered enable switch. This patch adds code checking for the new "x-powers,self-working-mode" property, and a separate mfd_cell list that includes the power button (PEK) sub-device. Signed-off-by: Chen-Yu Tsai --- drivers/mfd/axp20x.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 9a2ef3d9b8f8..1988881529a9 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -221,6 +221,11 @@ static const struct resource axp803_pek_resources[] = { DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_FAL_EDGE, "PEK_DBF"), }; +static const struct resource axp806_pek_resources[] = { + DEFINE_RES_IRQ_NAMED(AXP806_IRQ_POK_RISE, "PEK_DBR"), + DEFINE_RES_IRQ_NAMED(AXP806_IRQ_POK_FALL, "PEK_DBF"), +}; + static const struct resource axp809_pek_resources[] = { DEFINE_RES_IRQ_NAMED(AXP809_IRQ_PEK_RIS_EDGE, "PEK_DBR"), DEFINE_RES_IRQ_NAMED(AXP809_IRQ_PEK_FAL_EDGE, "PEK_DBF"), @@ -730,6 +735,17 @@ static const struct mfd_cell axp803_cells[] = { { .name = "axp20x-regulator" }, }; +static const struct mfd_cell axp806_self_working_cells[] = { + { + .name = "axp221-pek", + .num_resources = ARRAY_SIZE(axp806_pek_resources), + .resources = axp806_pek_resources, + }, + { + .name = "axp20x-regulator", + }, +}; + static const struct mfd_cell axp806_cells[] = { { .id = 2, @@ -842,8 +858,14 @@ int axp20x_match_device(struct axp20x_dev *axp20x) axp20x->regmap_irq_chip = &axp803_regmap_irq_chip; break; case AXP806_ID: - axp20x->nr_cells = ARRAY_SIZE(axp806_cells); - axp20x->cells = axp806_cells; + if (of_property_read_bool(axp20x->dev->of_node, + "x-powers,self-working-mode")) { + axp20x->nr_cells = ARRAY_SIZE(axp806_self_working_cells); + axp20x->cells = axp806_self_working_cells; + } else { + axp20x->nr_cells = ARRAY_SIZE(axp806_cells); + axp20x->cells = axp806_cells; + } axp20x->regmap_cfg = &axp806_regmap_config; axp20x->regmap_irq_chip = &axp806_regmap_irq_chip; break; @@ -901,7 +923,9 @@ int axp20x_device_probe(struct axp20x_dev *axp20x) */ if (axp20x->variant == AXP806_ID) { if (of_property_read_bool(axp20x->dev->of_node, - "x-powers,master-mode")) + "x-powers,master-mode") || + of_property_read_bool(axp20x->dev->of_node, + "x-powers,self-working-mode")) regmap_write(axp20x->regmap, AXP806_REG_ADDR_EXT, AXP806_REG_ADDR_EXT_ADDR_MASTER_MODE); else -- 2.17.1