From: Rob Herring <robh@kernel.org>
To: Abel Vesa <abel.vesa@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>,
Dong Aisheng <aisheng.dong@nxp.com>,
linux-gpio@vger.kernel.org, linux-imx@nxp.com,
Shawn Guo <shawnguo@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Linus Walleij <linus.walleij@linaro.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Abel Vesa <abelvesa@linux.com>
Subject: Re: [PATCH v5 1/2] dt-bindings: add binding for i.MX8MQ IOMUXC
Date: Mon, 25 Jun 2018 09:17:19 -0600 [thread overview]
Message-ID: <20180625151719.GA16723@rob-hp-laptop> (raw)
In-Reply-To: <1529680549-22079-2-git-send-email-abel.vesa@nxp.com>
On Fri, Jun 22, 2018 at 06:15:48PM +0300, Abel Vesa wrote:
> This adds the binding for the i.MX8MQ pin controller, in the same
> fashion as earlier i.MX SoCs.
>
> Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
> Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
> .../bindings/pinctrl/fsl,imx8mq-pinctrl.txt | 32 ++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
> new file mode 100644
> index 0000000..e1c405d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.txt
> @@ -0,0 +1,32 @@
> +* Freescale IMX8MQ IOMUX Controller
> +
> +Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> +for common binding part and usage.
> +
> +Required properties:
> +- compatible: "fsl,imx8mq-iomuxc"
reg?
> +- fsl,pins: each entry consists of 6 integers and represents the mux and config
> + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
> + input_val> are specified using a PIN_FUNC_ID macro, which can be found in
> + imx8mq-pinfunc.h under device tree source folder. The last integer CONFIG is
> + the pad setting value like pull-up on this pin. Please refer to i.MX8M Quad
> + Reference Manual for detailed CONFIG settings.
Needs to specify this is in sub-nodes.
> +
> +Examples:
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_uart1>;
> +};
> +
> +iomuxc: iomuxc@30330000 {
pinctrl@...
> + compatible = "fsl,imx8mq-iomuxc";
> + reg = <0x0 0x30330000 0x0 0x10000>;
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
> + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
> + >;
> + };
> +};
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-06-25 15:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-22 15:15 [PATCH v5 0/2] pinctrl: imx: Add driver for i.MX8MQ Abel Vesa
2018-06-22 15:15 ` [PATCH v5 1/2] dt-bindings: add binding for i.MX8MQ IOMUXC Abel Vesa
2018-06-25 15:17 ` Rob Herring [this message]
2018-06-22 15:15 ` [PATCH v5 2/2] pinctrl: imx: add driver for i.MX8MQ Abel Vesa
2018-06-29 8:07 ` [PATCH v5 0/2] pinctrl: imx: Add " Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180625151719.GA16723@rob-hp-laptop \
--to=robh@kernel.org \
--cc=abel.vesa@nxp.com \
--cc=abelvesa@linux.com \
--cc=aisheng.dong@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox