From: Rob Herring <robh@kernel.org>
To: Rohit kumar <rohitkr@codeaurora.org>
Cc: lgirdwood@gmail.com, broonie@kernel.org, mark.rutland@arm.com,
plai@codeaurora.org, bgoswami@codeaurora.org, perex@perex.cz,
srinivas.kandagatla@linaro.org, tiwai@suse.com,
alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/2] ASoC: qcom: dt-bindings: Add sdm845 machine bindings
Date: Mon, 25 Jun 2018 13:17:37 -0600 [thread overview]
Message-ID: <20180625191737.GA13246@rob-hp-laptop> (raw)
In-Reply-To: <1529578399-3633-2-git-send-email-rohitkr@codeaurora.org>
On Thu, Jun 21, 2018 at 04:23:18PM +0530, Rohit kumar wrote:
> Add devicetree bindings documentation file for SDM845 sound card.
>
> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
> ---
> .../devicetree/bindings/sound/qcom,sdm845.txt | 82 ++++++++++++++++++++++
> 1 file changed, 82 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/qcom,sdm845.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
> new file mode 100644
> index 0000000..68feb08
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt
> @@ -0,0 +1,82 @@
> +* Qualcomm Technologies Inc. SDM845 ASoC sound card driver
> +
> +This binding describes the SDM845 sound card, which uses qdsp for audio.
> +
> +- compatible:
> + Usage: required
> + Value type: <stringlist>
> + Definition: must be "qcom,sdm845-sndcard"
> +
> +- qcom,audio-routing:
Use just 'audio-routing'.
> + Usage: Optional
> + Value type: <stringlist>
> + Definition: A list of the connections between audio components.
> + Each entry is a pair of strings, the first being the
> + connection's sink, the second being the connection's
> + source. Valid names could be power supplies, MicBias
> + of codec and the jacks on the board.
> +
> +- cdc-vdd-supply:
> + Usage: Optional
> + Value type: <phandle>
> + Definition: phandle of regulator supply required for codec vdd.
The codec supply should be in the codec node.
> +
> += dailinks
> +Each subnode of sndcard represents either a dailink, and subnodes of each
> +dailinks would be cpu/codec/platform dais.
> +
> +- link-name:
> + Usage: required
> + Value type: <string>
> + Definition: User friendly name for dai link
> +
> += CPU, PLATFORM, CODEC dais subnodes
> +- cpu:
> + Usage: required
> + Value type: <subnode>
> + Definition: cpu dai sub-node
> +
> +- codec:
> + Usage: required
> + Value type: <subnode>
> + Definition: codec dai sub-node
> +
> +- platform:
> + Usage: Optional
> + Value type: <subnode>
> + Definition: platform dai sub-node
> +
> +- sound-dai:
> + Usage: required
> + Value type: <phandle>
> + Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node.
> +
> +Example:
> +
> +audio {
> + compatible = "qcom,sdm845-sndcard";
> + qcom,model = "sdm845-snd-card";
Not documented. Just use 'model'.
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pri_mi2s_active &pri_mi2s_ws_active>;
> + pinctrl-1 = <&pri_mi2s_sleep &pri_mi2s_ws_sleep>;
> +
> + cdc-vdd-supply = <&pm8998_l14>;
> +
> + mm1-dai-link {
> + link-name = "MultiMedia1";
> + cpu {
> + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
> + };
> + };
> +
> + pri-mi2s-dai-link {
> + link-name = "PRI MI2S Playback";
> + cpu {
> + sound-dai = <&q6afedai PRIMARY_MI2S_RX>;
> + };
> +
> + platform {
> + sound-dai = <&q6routing>;
> + };
> + };
> +};
> --
> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
>
next prev parent reply other threads:[~2018-06-25 19:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-21 10:53 [PATCH v2 0/2] Add support for audio on SDM845 SoC Rohit kumar
2018-06-21 10:53 ` [PATCH v2 1/2] ASoC: qcom: dt-bindings: Add sdm845 machine bindings Rohit kumar
2018-06-25 19:17 ` Rob Herring [this message]
2018-06-28 6:20 ` Rohit Kumar
2018-06-28 14:04 ` [alsa-devel] " Rob Herring
2018-06-21 10:53 ` [PATCH v2 2/2] ASoC: qcom: add sdm845 sound card support Rohit kumar
2018-06-21 12:35 ` [alsa-devel] " Vinod
2018-06-21 15:09 ` Srinivas Kandagatla
2018-06-22 10:36 ` Rohit Kumar
2018-06-22 12:32 ` [alsa-devel] " Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180625191737.GA13246@rob-hp-laptop \
--to=robh@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@codeaurora.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=perex@perex.cz \
--cc=plai@codeaurora.org \
--cc=rohitkr@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox