devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: linux-input@vger.kernel.org, linux-pm@vger.kernel.org
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sebastian Reichel <sre@kernel.org>,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	Vinod Koul <vkoul@kernel.org>
Subject: [PATCH v4 5/6] dt-bindings: power: reset: qcom: Add resin binding
Date: Wed, 27 Jun 2018 17:23:00 +0530	[thread overview]
Message-ID: <20180627115301.21330-6-vkoul@kernel.org> (raw)
In-Reply-To: <20180627115301.21330-1-vkoul@kernel.org>

Resin is similar to pwrkey, add the description and example
for resin bindings

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 .../devicetree/bindings/input/qcom,pm8941-pwrkey.txt       |  1 +
 Documentation/devicetree/bindings/power/reset/qcom,pon.txt | 14 ++++++++++++--
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
index bf719396eadd..34ab5763f494 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
@@ -7,6 +7,7 @@ PROPERTIES
 	Value type: <string>
 	Definition: must be one of:
 		    "qcom,pm8941-pwrkey"
+		    "qcom,pm8941-resin"
 
 - reg:
 	Usage: required
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
index f32cdd358267..651491bb63b7 100644
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
@@ -1,9 +1,9 @@
 Qualcomm PON Device
 
 The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
-along with the Android reboot-mode.
+and resin along with the Android reboot-mode.
 
-This DT node has pwrkey as sub node.
+This DT node has pwrkey and resin as sub nodes.
 
 Required Properties:
 -compatible: "qcom,pm8916-pon"
@@ -12,6 +12,8 @@ Required Properties:
 Optional subnode:
 -pwrkey: Specifies the subnode pwrkey and should follow the
  qcom,pm8941-pwrkey.txt description.
+-resin: Specifies the subnode resin and should follow the
+ qcom,pm8xxx-pwrkey.txt description.
 
 The rest of the properties should follow the generic reboot-mode description
 found in reboot-mode.txt
@@ -32,4 +34,12 @@ Example:
 			bias-pull-up;
 			linux,code = <KEY_POWER>;
 		};
+
+		resin {
+			compatible = "qcom,pm8941-resin";
+			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
 	};
-- 
2.14.4

  parent reply	other threads:[~2018-06-27 11:53 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-27 11:52 [PATCH v4 0/6] input: pm8941-pwrkey: Add support for reboot reason Vinod Koul
2018-06-27 11:52 ` [PATCH v4 1/6] dt-bindings: power: reset: Add qcom pon binding Vinod Koul
2018-06-27 11:52 ` [PATCH v4 2/6] power: reset: qcom-pon: Add Qcom PON driver Vinod Koul
2018-06-28 11:59   ` Sebastian Reichel
2018-06-28 12:59     ` Vinod
2018-06-28 13:16       ` Sebastian Reichel
2018-06-28 13:27         ` Vinod
2018-06-28 15:03           ` Vinod
2018-06-27 11:52 ` [PATCH v4 3/6] dt-bindings: Input: Add additional property to qcom pwrkey Vinod Koul
2018-06-27 11:52 ` [PATCH v4 4/6] input: pm8941-pwrkey: Abstract register offsets and event code Vinod Koul
2018-06-27 11:53 ` Vinod Koul [this message]
2018-06-27 17:26   ` [PATCH v4 5/6] dt-bindings: power: reset: qcom: Add resin binding Bjorn Andersson
2018-06-27 11:53 ` [PATCH v4 6/6] input: pm8941-pwrkey: Add resin entry Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180627115301.21330-6-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).