From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Vinod Koul Subject: [PATCH v4 5/6] dt-bindings: power: reset: qcom: Add resin binding Date: Wed, 27 Jun 2018 17:23:00 +0530 Message-Id: <20180627115301.21330-6-vkoul@kernel.org> In-Reply-To: <20180627115301.21330-1-vkoul@kernel.org> References: <20180627115301.21330-1-vkoul@kernel.org> To: linux-input@vger.kernel.org, linux-pm@vger.kernel.org Cc: Bjorn Andersson , Dmitry Torokhov , Rob Herring , Sebastian Reichel , devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, Vinod Koul List-ID: Resin is similar to pwrkey, add the description and example for resin bindings Signed-off-by: Vinod Koul --- .../devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 + Documentation/devicetree/bindings/power/reset/qcom,pon.txt | 14 ++++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt index bf719396eadd..34ab5763f494 100644 --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt @@ -7,6 +7,7 @@ PROPERTIES Value type: Definition: must be one of: "qcom,pm8941-pwrkey" + "qcom,pm8941-resin" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt index f32cdd358267..651491bb63b7 100644 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt @@ -1,9 +1,9 @@ Qualcomm PON Device The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey -along with the Android reboot-mode. +and resin along with the Android reboot-mode. -This DT node has pwrkey as sub node. +This DT node has pwrkey and resin as sub nodes. Required Properties: -compatible: "qcom,pm8916-pon" @@ -12,6 +12,8 @@ Required Properties: Optional subnode: -pwrkey: Specifies the subnode pwrkey and should follow the qcom,pm8941-pwrkey.txt description. +-resin: Specifies the subnode resin and should follow the + qcom,pm8xxx-pwrkey.txt description. The rest of the properties should follow the generic reboot-mode description found in reboot-mode.txt @@ -32,4 +34,12 @@ Example: bias-pull-up; linux,code = ; }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; }; -- 2.14.4