* [PATCH 1/1] ARM: dts: imx6ull: add operating points
@ 2018-06-29 14:52 Sébastien Szymanski
2018-07-02 4:52 ` Viresh Kumar
0 siblings, 1 reply; 3+ messages in thread
From: Sébastien Szymanski @ 2018-06-29 14:52 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Rob Herring, Mark Rutland, devicetree,
linux-kernel, Rafael J . Wysocki, Viresh Kumar,
Sébastien Szymanski
i.MX6ULL has different operating ranges than i.MX6UL so add the
operating points for the i.MX6ULL and removed them form board device
trees. A 25mV offset is added to the minimum allowed values like for the
i.MX6UL.
The valid frequencies are now selected by the cpufreq driver according
to ratings stored in fuses since commit 0aa9abd4c212 ("cpufreq: imx6q:
check speed grades for i.MX6ULL")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
---
arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 14 --------------
arch/arm/boot/dts/imx6ull.dtsi | 19 +++++++++++++++++++
2 files changed, 19 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index 3dffbcd50bf6..183193e8580d 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -20,20 +20,6 @@
&cpu0 {
clock-frequency = <792000000>;
- operating-points = <
- /* kHz uV */
- 792000 1225000
- 528000 1175000
- 396000 1025000
- 198000 950000
- >;
- fsl,soc-operating-points = <
- /* KHz uV */
- 792000 1175000
- 528000 1175000
- 396000 1175000
- 198000 1175000
- >;
};
&iomuxc {
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index ebc25c98e5e1..ade64bd46fab 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -48,6 +48,25 @@
/* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
/delete-node/ &crypto;
+&cpu0 {
+ operating-points = <
+ /* kHz uV */
+ 900000 1275000
+ 792000 1225000
+ 528000 1175000
+ 396000 1025000
+ 198000 950000
+ >;
+ fsl,soc-operating-points = <
+ /* KHz uV */
+ 900000 1175000
+ 792000 1175000
+ 528000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+};
+
/ {
soc {
aips3: aips-bus@2200000 {
--
2.16.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH 1/1] ARM: dts: imx6ull: add operating points
2018-06-29 14:52 [PATCH 1/1] ARM: dts: imx6ull: add operating points Sébastien Szymanski
@ 2018-07-02 4:52 ` Viresh Kumar
2018-07-03 6:34 ` Shawn Guo
0 siblings, 1 reply; 3+ messages in thread
From: Viresh Kumar @ 2018-07-02 4:52 UTC (permalink / raw)
To: Sébastien Szymanski
Cc: linux-arm-kernel, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Rob Herring, Mark Rutland, devicetree, linux-kernel,
Rafael J . Wysocki
On 29-06-18, 16:52, Sébastien Szymanski wrote:
> i.MX6ULL has different operating ranges than i.MX6UL so add the
> operating points for the i.MX6ULL and removed them form board device
s/removed/remove/
s/form/from/
> trees. A 25mV offset is added to the minimum allowed values like for the
> i.MX6UL.
> The valid frequencies are now selected by the cpufreq driver according
> to ratings stored in fuses since commit 0aa9abd4c212 ("cpufreq: imx6q:
> check speed grades for i.MX6ULL")
>
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
> ---
> arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 14 --------------
> arch/arm/boot/dts/imx6ull.dtsi | 19 +++++++++++++++++++
> 2 files changed, 19 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
> index 3dffbcd50bf6..183193e8580d 100644
> --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
> +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
> @@ -20,20 +20,6 @@
>
> &cpu0 {
> clock-frequency = <792000000>;
> - operating-points = <
> - /* kHz uV */
> - 792000 1225000
> - 528000 1175000
> - 396000 1025000
> - 198000 950000
> - >;
> - fsl,soc-operating-points = <
> - /* KHz uV */
> - 792000 1175000
> - 528000 1175000
> - 396000 1175000
> - 198000 1175000
> - >;
> };
>
> &iomuxc {
> diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
> index ebc25c98e5e1..ade64bd46fab 100644
> --- a/arch/arm/boot/dts/imx6ull.dtsi
> +++ b/arch/arm/boot/dts/imx6ull.dtsi
> @@ -48,6 +48,25 @@
> /* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
> /delete-node/ &crypto;
>
> +&cpu0 {
> + operating-points = <
> + /* kHz uV */
> + 900000 1275000
> + 792000 1225000
> + 528000 1175000
> + 396000 1025000
> + 198000 950000
> + >;
> + fsl,soc-operating-points = <
> + /* KHz uV */
> + 900000 1175000
> + 792000 1175000
> + 528000 1175000
> + 396000 1175000
> + 198000 1175000
> + >;
> +};
> +
> / {
> soc {
> aips3: aips-bus@2200000 {
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
--
viresh
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH 1/1] ARM: dts: imx6ull: add operating points
2018-07-02 4:52 ` Viresh Kumar
@ 2018-07-03 6:34 ` Shawn Guo
0 siblings, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2018-07-03 6:34 UTC (permalink / raw)
To: Viresh Kumar
Cc: Sébastien Szymanski, linux-arm-kernel, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Rob Herring, Mark Rutland, devicetree, linux-kernel,
Rafael J . Wysocki
On Mon, Jul 02, 2018 at 10:22:05AM +0530, Viresh Kumar wrote:
> On 29-06-18, 16:52, Sébastien Szymanski wrote:
> > i.MX6ULL has different operating ranges than i.MX6UL so add the
> > operating points for the i.MX6ULL and removed them form board device
>
> s/removed/remove/
> s/form/from/
I fixed them up and applied the patch.
Shawn
>
> > trees. A 25mV offset is added to the minimum allowed values like for the
> > i.MX6UL.
> > The valid frequencies are now selected by the cpufreq driver according
> > to ratings stored in fuses since commit 0aa9abd4c212 ("cpufreq: imx6q:
> > check speed grades for i.MX6ULL")
> >
> > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-07-03 6:34 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-06-29 14:52 [PATCH 1/1] ARM: dts: imx6ull: add operating points Sébastien Szymanski
2018-07-02 4:52 ` Viresh Kumar
2018-07-03 6:34 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).