From mboxrd@z Thu Jan 1 00:00:00 1970 From: Boris Brezillon Subject: Re: [PATCH 0/3] clk: meson: add a sub EMMC clock controller support Date: Tue, 3 Jul 2018 09:17:11 +0200 Message-ID: <20180703091711.1d52c278@bbrezillon> References: <20180703145716.31860-1-yixun.lan@amlogic.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180703145716.31860-1-yixun.lan@amlogic.com> Sender: linux-kernel-owner@vger.kernel.org To: Yixun Lan Cc: Jerome Brunet , Neil Armstrong , Kevin Hilman , Carlo Caione , Michael Turquette , Stephen Boyd , Rob Herring , Miquel Raynal , Martin Blumenstingl , Liang Yang , Qiufang Dai , Jian Hu , linux-clk@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On Tue, 3 Jul 2018 14:57:13 +0000 Yixun Lan wrote: > This driver will add a EMMC clock controller driver support. > The original idea about adding a clock controller is during the > discussion in the NAND driver mainline effort[1]. > > I've tested this in the S400 board (AXG platform) by using NAND driver. > > [1] https://lkml.kernel.org/r/20180628090034.0637a062@xps13 This is much better :-). > > Yixun Lan (3): > clk: meson: add DT documentation for emmc clock controller > clk: meson: add sub EMMC clock dt-bindings IDs > clk: meson: add sub EMMC clock controller driver > > .../bindings/clock/amlogic,emmc-clkc.txt | 45 ++++++ > drivers/clk/meson/Kconfig | 9 ++ > drivers/clk/meson/Makefile | 1 + > drivers/clk/meson/emmc-clkc.c | 136 ++++++++++++++++++ > include/dt-bindings/clock/emmc-clkc.h | 14 ++ > 5 files changed, 205 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/amlogic,emmc-clkc.txt > create mode 100644 drivers/clk/meson/emmc-clkc.c > create mode 100644 include/dt-bindings/clock/emmc-clkc.h >