From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rob Herring <robh@kernel.org>
Subject: Re: [PATCH 1/2] dt-bindings: reset: uniphier: add USB3 controller
 reset support
Date: Tue, 3 Jul 2018 17:37:47 -0600
Message-ID: <20180703233747.GA850@rob-hp-laptop>
References: <1530259891-18822-1-git-send-email-hayashi.kunihiko@socionext.com>
 <1530259891-18822-2-git-send-email-hayashi.kunihiko@socionext.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <1530259891-18822-2-git-send-email-hayashi.kunihiko@socionext.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>, Mark Rutland <mark.rutland@arm.com>, Masahiro Yamada <yamada.masahiro@socionext.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Masami Hiramatsu <masami.hiramatsu@linaro.org>, Jassi Brar <jaswinder.singh@linaro.org>
List-Id: devicetree@vger.kernel.org

On Fri, Jun 29, 2018 at 05:11:30PM +0900, Kunihiko Hayashi wrote:
> Add DT bindings for reset control of USB3 controller implemented in
> UniPhier SoCs.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
>  .../devicetree/bindings/reset/uniphier-reset.txt   | 45 ++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
> index 93efed6..f21d81c 100644
> --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
> +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
> @@ -118,3 +118,48 @@ Example:
>  
>  		other nodes ...
>  	};
> +
> +
> +USB3 controller reset
> +---------------------
> +
> +Required properties:
> +- compatible: Should be
> +    "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC
> +    "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC
> +    "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC
> +    "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC
> +- #reset-cells: Should be 1.
> +- reg: Specifies offset and length of the register set for the device.
> +- clocks: A list of phandles to the clock gate for USB3 glue layer.
> +	According to the clock-names, appropriate clocks are required.
> +- clock-names: Should contain
> +    "gio", "link" - for Pro4 SoC
> +    "link"        - for others
> +- resets: A list of phandles to the reset control for USB3 glue layer.
> +	According to the reset-names, appropriate resets are required.
> +- reset-names: Should contain
> +    "gio", "link" - for Pro4 SoC
> +    "link"        - for others
> +
> +Example:
> +
> +	usb-glue@65b00000 {
> +		compatible = "socionext,uniphier-ld20-dwc3-glue",
> +			     "simple-mfd";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0x65b00000 0x400>;
> +
> +		usb_rst: reset@0 {
> +			compatible = "socionext,uniphier-ld20-usb3-reset";

This looks weird. You have a reset controller within the USB block? And 
then a parent reset controller too?

> +			reg = <0x0 0x4>;
> +			#reset-cells = <1>;
> +			clock-names = "link";
> +			clocks = <&sys_clk 14>;
> +			clock-names = "link";
> +			resets = <&sys_rst 14>;
> +		};
> +
> +		other nodes ...

What other nodes?

> +	};
> -- 
> 2.7.4
>