From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v5 2/2] dt-bindings: iio: dac: Add docs for AD5758 DAC Date: Thu, 5 Jul 2018 15:18:58 -0600 Message-ID: <20180705211858.GA7441@rob-hp-laptop> References: <1530714773-18956-1-git-send-email-stefan.popa@analog.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1530714773-18956-1-git-send-email-stefan.popa@analog.com> Sender: linux-kernel-owner@vger.kernel.org To: Stefan Popa Cc: jic23@kernel.org, Michael.Hennerich@analog.com, lars@metafoo.de, knaack.h@gmx.de, pmeerw@pmeerw.net, mark.rutland@arm.com, mchehab@kernel.org, davem@davemloft.net, gregkh@linuxfoundation.org, akpm@linux-foundation.org, linus.walleij@linaro.org, rdunlap@infradead.org, devicetree@vger.kernel.org, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On Wed, Jul 04, 2018 at 05:32:53PM +0300, Stefan Popa wrote: > Signed-off-by: Stefan Popa > --- > Changes in v5: > - used a dac@0 as a more generic node name instead of ad5758@0. > Changes in v4: > - Nothing changed, just to follow the patch set version. > Changes in v3: > - AD5758 can be both a current and voltage output DAC. The > decision is made based on the DT and the channel type is set > during probe. > - range was replaced by range-microvolt and range-microamp > - dc-dc-mode, range-microvolt and range-microamp are required > properties. > - Introduced a slew-time-us property from which slew rate clock > and slew rate step are calculated using a best match algorithm. > - Added units in the name of the properties. > - Offered more explanation for the various modes of operation. > > Changes in v2: > - Nothing changed, just to follow the patch set version. > > .../devicetree/bindings/iio/dac/ad5758.txt | 73 ++++++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 74 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/dac/ad5758.txt Reviewed-by: Rob Herring