[PATCH v2 0/3] arm: dts: zynq: improvements and cleanup

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH v2 0/3] arm: dts: zynq: improvements and cleanup
@ 2018-07-06  6:01 Luis Araneda
  2018-07-06  6:01 ` [PATCH v2 1/3] arm: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards Luis Araneda
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Luis Araneda @ 2018-07-06  6:01 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Michal Simek
  Cc: devicetree, linux-kernel, linux-arm-kernel, Luis Araneda

This series attempts to standardize device naming and improve
its information for better identification

The values of the "compatible" and "model" device-tree properties
are corrected for some devices, adding complementary information
when necessary

Changes since v1 (RFC):
- Add values to compatible property instead of replacing them
- Don't remove "internal" word from Xilinx boards on dt-bindings
- Migrate content of adapteva dt-binding file into Xilinx's
- Sort additional compatible strings alphabetically
  by manufacturer
- Dropped patch that renamed the zedboard development board
  (no apparent benefit)
- Dropped the patch that removed the "zynq" value from the
  compatible strings (breaks the ABI)

Luis Araneda (3):
  arm: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed
    boards
  dt-bindings: xilinx: Add missing zynq boards and sort entries
  arm: dts: zynq: correct and improve the model property of dt files

 .../devicetree/bindings/arm/adapteva.txt      |  7 -----
 .../devicetree/bindings/arm/xilinx.txt        | 30 +++++++++++++++----
 arch/arm/boot/dts/zynq-cc108.dts              |  2 +-
 arch/arm/boot/dts/zynq-microzed.dts           |  4 +--
 arch/arm/boot/dts/zynq-parallella.dts         |  2 +-
 arch/arm/boot/dts/zynq-zc702.dts              |  2 +-
 arch/arm/boot/dts/zynq-zc706.dts              |  2 +-
 arch/arm/boot/dts/zynq-zc770-xm010.dts        |  2 +-
 arch/arm/boot/dts/zynq-zc770-xm011.dts        |  2 +-
 arch/arm/boot/dts/zynq-zc770-xm012.dts        |  2 +-
 arch/arm/boot/dts/zynq-zc770-xm013.dts        |  2 +-
 arch/arm/boot/dts/zynq-zed.dts                |  4 +--
 arch/arm/boot/dts/zynq-zybo-z7.dts            |  2 +-
 arch/arm/boot/dts/zynq-zybo.dts               |  2 +-
 14 files changed, 39 insertions(+), 26 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/adapteva.txt

-- 
2.18.0

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v2 1/3] arm: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards
  2018-07-06  6:01 [PATCH v2 0/3] arm: dts: zynq: improvements and cleanup Luis Araneda
@ 2018-07-06  6:01 ` Luis Araneda
  2018-07-06  6:01 ` [PATCH v2 2/3] dt-bindings: xilinx: Add missing zynq boards and sort entries Luis Araneda
  2018-07-06  6:01 ` [PATCH v2 3/3] arm: dts: zynq: correct and improve the model property of dt files Luis Araneda
  2 siblings, 0 replies; 6+ messages in thread
From: Luis Araneda @ 2018-07-06  6:01 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Michal Simek
  Cc: devicetree, linux-kernel, linux-arm-kernel, Luis Araneda

Both boards are made by Avnet, Inc. So add an additional
value to the compatible property

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
---

Changes since v1 (RFC):
- Add values to compatible property instead of replacing them

 arch/arm/boot/dts/zynq-microzed.dts | 2 +-
 arch/arm/boot/dts/zynq-zed.dts      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
index aa4a0b6defb8..574ef2276182 100644
--- a/arch/arm/boot/dts/zynq-microzed.dts
+++ b/arch/arm/boot/dts/zynq-microzed.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "Zynq MicroZED Development Board";
-	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+	compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000";
 
 	aliases {
 		ethernet0 = &gem0;
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 53c6883ce1f6..595022487965 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -8,7 +8,7 @@
 
 / {
 	model = "Zynq Zed Development Board";
-	compatible = "xlnx,zynq-zed", "xlnx,zynq-7000";
+	compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";
 
 	aliases {
 		ethernet0 = &gem0;
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v2 2/3] dt-bindings: xilinx: Add missing zynq boards and sort entries
  2018-07-06  6:01 [PATCH v2 0/3] arm: dts: zynq: improvements and cleanup Luis Araneda
  2018-07-06  6:01 ` [PATCH v2 1/3] arm: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards Luis Araneda
@ 2018-07-06  6:01 ` Luis Araneda
  2018-07-09  8:18   ` Michal Simek
  2018-07-06  6:01 ` [PATCH v2 3/3] arm: dts: zynq: correct and improve the model property of dt files Luis Araneda
  2 siblings, 1 reply; 6+ messages in thread
From: Luis Araneda @ 2018-07-06  6:01 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Michal Simek
  Cc: devicetree, linux-kernel, linux-arm-kernel, Luis Araneda

The bindings were missing when adding the device-tree files

Also, improve description of existing boards, sort them
alphabetically by manufacturer, and migrate the contents
of adapteva dt dindigns into Xilinx's

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
---

Changes since v1 (RFC):
- Don't remove "internal" word from Xilinx boards on dt-bindings
- Migrate content of adapteva dt-binding file into Xilinx's
- Sort additional compatible strings alphabetically
  by manufacturer

 .../devicetree/bindings/arm/adapteva.txt      |  7 -----
 .../devicetree/bindings/arm/xilinx.txt        | 30 +++++++++++++++----
 2 files changed, 25 insertions(+), 12 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/adapteva.txt

diff --git a/Documentation/devicetree/bindings/arm/adapteva.txt b/Documentation/devicetree/bindings/arm/adapteva.txt
deleted file mode 100644
index 1d8af9e36065..000000000000
--- a/Documentation/devicetree/bindings/arm/adapteva.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Adapteva Platforms Device Tree Bindings
----------------------------------------
-
-Parallella board
-
-Required root node properties:
-    - compatible = "adapteva,parallella";
diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt
index b9043bc35c14..26fe5ecc4332 100644
--- a/Documentation/devicetree/bindings/arm/xilinx.txt
+++ b/Documentation/devicetree/bindings/arm/xilinx.txt
@@ -8,18 +8,38 @@ Required root node properties:
 
 Additional compatible strings:
 
-- Xilinx internal board cc108
+- Adapteva Parallella board
+  "adapteva,parallella"
+
+- Avnet MicroZed board
+  "avnet,zynq-microzed"
+  "xlnx,zynq-microzed"
+
+- Avnet ZedBoard board
+  "avnet,zynq-zed"
+  "xlnx,zynq-zed"
+
+- Digilent Zybo board
+  "digilent,zynq-zybo"
+
+- Digilent Zybo Z7 board
+  "digilent,zynq-zybo-z7"
+
+- Xilinx CC108 internal board
   "xlnx,zynq-cc108"
 
-- Xilinx internal board zc770 with different FMC cards
+- Xilinx ZC702 internal board
+  "xlnx,zynq-zc702"
+
+- Xilinx ZC706 internal board
+  "xlnx,zynq-zc706"
+
+- Xilinx ZC770 internal board, with different FMC cards
   "xlnx,zynq-zc770-xm010"
   "xlnx,zynq-zc770-xm011"
   "xlnx,zynq-zc770-xm012"
   "xlnx,zynq-zc770-xm013"
 
-- Digilent Zybo Z7 board
-  "digilent,zynq-zybo-z7"
-
 ---------------------------------------------------------------
 
 Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 2/3] dt-bindings: xilinx: Add missing zynq boards and sort entries
  2018-07-06  6:01 ` [PATCH v2 2/3] dt-bindings: xilinx: Add missing zynq boards and sort entries Luis Araneda
@ 2018-07-09  8:18   ` Michal Simek
  2018-07-09 14:17     ` Luis Araneda
  0 siblings, 1 reply; 6+ messages in thread
From: Michal Simek @ 2018-07-09  8:18 UTC (permalink / raw)
  To: Luis Araneda, Rob Herring, Mark Rutland, Michal Simek
  Cc: devicetree, linux-arm-kernel, linux-kernel

On 6.7.2018 08:01, Luis Araneda wrote:
> The bindings were missing when adding the device-tree files
> 
> Also, improve description of existing boards, sort them
> alphabetically by manufacturer, and migrate the contents
> of adapteva dt dindigns into Xilinx's
> 
> Signed-off-by: Luis Araneda <luaraneda@gmail.com>
> ---
> 
> Changes since v1 (RFC):
> - Don't remove "internal" word from Xilinx boards on dt-bindings
> - Migrate content of adapteva dt-binding file into Xilinx's
> - Sort additional compatible strings alphabetically
>   by manufacturer
> 
>  .../devicetree/bindings/arm/adapteva.txt      |  7 -----
>  .../devicetree/bindings/arm/xilinx.txt        | 30 +++++++++++++++----
>  2 files changed, 25 insertions(+), 12 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/arm/adapteva.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/adapteva.txt b/Documentation/devicetree/bindings/arm/adapteva.txt
> deleted file mode 100644
> index 1d8af9e36065..000000000000
> --- a/Documentation/devicetree/bindings/arm/adapteva.txt
> +++ /dev/null
> @@ -1,7 +0,0 @@
> -Adapteva Platforms Device Tree Bindings
> ----------------------------------------
> -
> -Parallella board
> -
> -Required root node properties:
> -    - compatible = "adapteva,parallella";
> diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt
> index b9043bc35c14..26fe5ecc4332 100644
> --- a/Documentation/devicetree/bindings/arm/xilinx.txt
> +++ b/Documentation/devicetree/bindings/arm/xilinx.txt
> @@ -8,18 +8,38 @@ Required root node properties:
>  
>  Additional compatible strings:
>  
> -- Xilinx internal board cc108
> +- Adapteva Parallella board
> +  "adapteva,parallella"
> +
> +- Avnet MicroZed board
> +  "avnet,zynq-microzed"
> +  "xlnx,zynq-microzed"
> +
> +- Avnet ZedBoard board
> +  "avnet,zynq-zed"
> +  "xlnx,zynq-zed"
> +
> +- Digilent Zybo board
> +  "digilent,zynq-zybo"
> +
> +- Digilent Zybo Z7 board
> +  "digilent,zynq-zybo-z7"
> +
> +- Xilinx CC108 internal board
>    "xlnx,zynq-cc108"
>  
> -- Xilinx internal board zc770 with different FMC cards
> +- Xilinx ZC702 internal board
> +  "xlnx,zynq-zc702"
> +
> +- Xilinx ZC706 internal board
> +  "xlnx,zynq-zc706"
> +
> +- Xilinx ZC770 internal board, with different FMC cards
>    "xlnx,zynq-zc770-xm010"
>    "xlnx,zynq-zc770-xm011"
>    "xlnx,zynq-zc770-xm012"
>    "xlnx,zynq-zc770-xm013"
>  
> -- Digilent Zybo Z7 board
> -  "digilent,zynq-zybo-z7"
> -
>  ---------------------------------------------------------------
>  
>  Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings
> 

Please do it with more patches. There are 3 changes in one patch.

Thanks,
Michal

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 2/3] dt-bindings: xilinx: Add missing zynq boards and sort entries
  2018-07-09  8:18   ` Michal Simek
@ 2018-07-09 14:17     ` Luis Araneda
  0 siblings, 0 replies; 6+ messages in thread
From: Luis Araneda @ 2018-07-09 14:17 UTC (permalink / raw)
  To: Michal Simek
  Cc: Rob Herring, Mark Rutland, devicetree, linux-arm-kernel,
	linux-kernel

Hi Michal,

On Mon, Jul 9, 2018 at 4:18 AM Michal Simek <michal.simek@xilinx.com> wrote:
> Please do it with more patches. There are 3 changes in one patch.

Ok, I'll split it into 3 different patches on v3.

Thanks,

Luis Araneda.

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v2 3/3] arm: dts: zynq: correct and improve the model property of dt files
  2018-07-06  6:01 [PATCH v2 0/3] arm: dts: zynq: improvements and cleanup Luis Araneda
  2018-07-06  6:01 ` [PATCH v2 1/3] arm: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards Luis Araneda
  2018-07-06  6:01 ` [PATCH v2 2/3] dt-bindings: xilinx: Add missing zynq boards and sort entries Luis Araneda
@ 2018-07-06  6:01 ` Luis Araneda
  2 siblings, 0 replies; 6+ messages in thread
From: Luis Araneda @ 2018-07-06  6:01 UTC (permalink / raw)
  To: Rob Herring, Mark Rutland, Michal Simek
  Cc: devicetree, linux-kernel, linux-arm-kernel, Luis Araneda

Replace the current value of the model property by a more accurate
description of each board (which includes the manufacturer), as some
of the boards had the same value ("Xilinx Zynq")

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
---

Changes since v1 (RFC):
- No changes

 arch/arm/boot/dts/zynq-cc108.dts       | 2 +-
 arch/arm/boot/dts/zynq-microzed.dts    | 2 +-
 arch/arm/boot/dts/zynq-parallella.dts  | 2 +-
 arch/arm/boot/dts/zynq-zc702.dts       | 2 +-
 arch/arm/boot/dts/zynq-zc706.dts       | 2 +-
 arch/arm/boot/dts/zynq-zc770-xm010.dts | 2 +-
 arch/arm/boot/dts/zynq-zc770-xm011.dts | 2 +-
 arch/arm/boot/dts/zynq-zc770-xm012.dts | 2 +-
 arch/arm/boot/dts/zynq-zc770-xm013.dts | 2 +-
 arch/arm/boot/dts/zynq-zed.dts         | 2 +-
 arch/arm/boot/dts/zynq-zybo-z7.dts     | 2 +-
 arch/arm/boot/dts/zynq-zybo.dts        | 2 +-
 12 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts
index 1a0f631c1d8d..8b9ab9bba23b 100644
--- a/arch/arm/boot/dts/zynq-cc108.dts
+++ b/arch/arm/boot/dts/zynq-cc108.dts
@@ -12,8 +12,8 @@
 /include/ "zynq-7000.dtsi"
 
 / {
+	model = "Xilinx CC108 board";
 	compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
-	model = "Xilinx Zynq";
 
 	aliases {
 		ethernet0 = &gem0;
diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
index 574ef2276182..6ed84fb15902 100644
--- a/arch/arm/boot/dts/zynq-microzed.dts
+++ b/arch/arm/boot/dts/zynq-microzed.dts
@@ -7,7 +7,7 @@
 /include/ "zynq-7000.dtsi"
 
 / {
-	model = "Zynq MicroZED Development Board";
+	model = "Avnet MicroZed board";
 	compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000";
 
 	aliases {
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index c05f4b67d4c1..54592aeb92b9 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -12,7 +12,7 @@
 /include/ "zynq-7000.dtsi"
 
 / {
-	model = "Adapteva Parallella Board";
+	model = "Adapteva Parallella board";
 	compatible = "adapteva,parallella", "xlnx,zynq-7000";
 
 	aliases {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index f2330b0cb63d..3f84b94db995 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -7,7 +7,7 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZC702 Development Board";
+	model = "Xilinx ZC702 board";
 	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
 
 	aliases {
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 3ad1260ff2a1..a15908cacbcf 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -7,7 +7,7 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZC706 Development Board";
+	model = "Xilinx ZC706 board";
 	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
 
 	aliases {
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
index 6884f1ad66b7..0e1bfdd3421f 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -8,8 +8,8 @@
 #include "zynq-7000.dtsi"
 
 / {
+	model = "Xilinx ZC770 XM010 board";
 	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
-	model = "Xilinx Zynq";
 
 	aliases {
 		ethernet0 = &gem0;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts
index b78883cee96a..b7f65862c022 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts
@@ -8,8 +8,8 @@
 #include "zynq-7000.dtsi"
 
 / {
+	model = "Xilinx ZC770 XM011 board";
 	compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
-	model = "Xilinx Zynq";
 
 	aliases {
 		i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm012.dts b/arch/arm/boot/dts/zynq-zc770-xm012.dts
index c3169d63600d..d2359b789eb8 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm012.dts
@@ -8,8 +8,8 @@
 #include "zynq-7000.dtsi"
 
 / {
+	model = "Xilinx ZC770 XM012 board";
 	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
-	model = "Xilinx Zynq";
 
 	aliases {
 		i2c0 = &i2c0;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
index 8bb66859d774..651913f1afa2 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
@@ -8,8 +8,8 @@
 #include "zynq-7000.dtsi"
 
 / {
+	model = "Xilinx ZC770 XM013 board";
 	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
-	model = "Xilinx Zynq";
 
 	aliases {
 		ethernet0 = &gem1;
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 595022487965..3a4ae51ca4da 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -7,7 +7,7 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq Zed Development Board";
+	model = "Avnet ZedBoard board";
 	compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";
 
 	aliases {
diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts
index 1e713dc98920..be40be9b7222 100644
--- a/arch/arm/boot/dts/zynq-zybo-z7.dts
+++ b/arch/arm/boot/dts/zynq-zybo-z7.dts
@@ -3,7 +3,7 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZYBO Z7 Development Board";
+	model = "Digilent Zybo Z7 board";
 	compatible = "digilent,zynq-zybo-z7", "xlnx,zynq-7000";
 
 	aliases {
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index a6c00e7fa767..0439e9f1ea6f 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -7,7 +7,7 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZYBO Development Board";
+	model = "Digilent Zybo board";
 	compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
 
 	aliases {
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2018-07-09 14:17 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-07-06  6:01 [PATCH v2 0/3] arm: dts: zynq: improvements and cleanup Luis Araneda
2018-07-06  6:01 ` [PATCH v2 1/3] arm: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards Luis Araneda
2018-07-06  6:01 ` [PATCH v2 2/3] dt-bindings: xilinx: Add missing zynq boards and sort entries Luis Araneda
2018-07-09  8:18   ` Michal Simek
2018-07-09 14:17     ` Luis Araneda
2018-07-06  6:01 ` [PATCH v2 3/3] arm: dts: zynq: correct and improve the model property of dt files Luis Araneda

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).