[PATCH 13/17] ARM: dts: sun8i: r40: Remove fallback compatible for TCON TV

[Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>]

While registers between A83T and R40 TV TCON are the same, R40 TCON TV
driver has to set additional muxes in TCON TOP. Because of that, remove
fallback A83T TCON TV compatible.

Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
 arch/arm/boot/dts/sun8i-r40.dtsi | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 1dd088d82773..6b4fe8eeee99 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -666,8 +666,7 @@
 		};
 
 		tcon_tv0: lcd-controller@1c73000 {
-			compatible = "allwinner,sun8i-r40-tcon-tv",
-				     "allwinner,sun8i-a83t-tcon-tv";
+			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c73000 0x1000>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
@@ -690,8 +689,7 @@
 		};
 
 		tcon_tv1: lcd-controller@1c74000 {
-			compatible = "allwinner,sun8i-r40-tcon-tv",
-				     "allwinner,sun8i-a83t-tcon-tv";
+			compatible = "allwinner,sun8i-r40-tcon-tv";
 			reg = <0x01c74000 0x1000>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
-- 
2.18.0