From: Yixun Lan <yixun.lan@amlogic.com>
To: Linus Walleij <linus.walleij@linaro.org>, linux-gpio@vger.kernel.org
Cc: Yixun Lan <yixun.lan@amlogic.com>,
Xingyu Chen <xingyu.chen@amlogic.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>,
Carlo Caione <carlo@caione.org>, Rob Herring <robh@kernel.org>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v2 1/2] documentation: pinctrl: Add compatibles for Amlogic Meson G12A pin controllers
Date: Sat, 14 Jul 2018 23:27:53 +0000 [thread overview]
Message-ID: <20180714232754.5402-2-yixun.lan@amlogic.com> (raw)
In-Reply-To: <20180714232754.5402-1-yixun.lan@amlogic.com>
Add new compatible name for Amlogic's Meson-G12A pin controllers,
add a dt-binding header file which document the detail pin names.
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
.../bindings/pinctrl/meson,pinctrl.txt | 2 +
include/dt-bindings/gpio/meson-g12a-gpio.h | 114 ++++++++++++++++++
2 files changed, 116 insertions(+)
create mode 100644 include/dt-bindings/gpio/meson-g12a-gpio.h
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 54ecb8ab7788..82ead40311f6 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -13,6 +13,8 @@ Required properties for the root node:
"amlogic,meson-gxl-aobus-pinctrl"
"amlogic,meson-axg-periphs-pinctrl"
"amlogic,meson-axg-aobus-pinctrl"
+ "amlogic,meson-g12a-periphs-pinctrl"
+ "amlogic,meson-g12a-aobus-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
diff --git a/include/dt-bindings/gpio/meson-g12a-gpio.h b/include/dt-bindings/gpio/meson-g12a-gpio.h
new file mode 100644
index 000000000000..f7bd69350d18
--- /dev/null
+++ b/include/dt-bindings/gpio/meson-g12a-gpio.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ * Author: Xingyu Chen <xingyu.chen@amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_G12A_GPIO_H
+#define _DT_BINDINGS_MESON_G12A_GPIO_H
+
+/* First GPIO chip */
+#define GPIOAO_0 0
+#define GPIOAO_1 1
+#define GPIOAO_2 2
+#define GPIOAO_3 3
+#define GPIOAO_4 4
+#define GPIOAO_5 5
+#define GPIOAO_6 6
+#define GPIOAO_7 7
+#define GPIOAO_8 8
+#define GPIOAO_9 9
+#define GPIOAO_10 10
+#define GPIOAO_11 11
+#define GPIOE_0 12
+#define GPIOE_1 13
+#define GPIOE_2 14
+
+/* Second GPIO chip */
+#define GPIOZ_0 0
+#define GPIOZ_1 1
+#define GPIOZ_2 2
+#define GPIOZ_3 3
+#define GPIOZ_4 4
+#define GPIOZ_5 5
+#define GPIOZ_6 6
+#define GPIOZ_7 7
+#define GPIOZ_8 8
+#define GPIOZ_9 9
+#define GPIOZ_10 10
+#define GPIOZ_11 11
+#define GPIOZ_12 12
+#define GPIOZ_13 13
+#define GPIOZ_14 14
+#define GPIOZ_15 15
+#define GPIOH_0 16
+#define GPIOH_1 17
+#define GPIOH_2 18
+#define GPIOH_3 19
+#define GPIOH_4 20
+#define GPIOH_5 21
+#define GPIOH_6 22
+#define GPIOH_7 23
+#define GPIOH_8 24
+#define BOOT_0 25
+#define BOOT_1 26
+#define BOOT_2 27
+#define BOOT_3 28
+#define BOOT_4 29
+#define BOOT_5 30
+#define BOOT_6 31
+#define BOOT_7 32
+#define BOOT_8 33
+#define BOOT_9 34
+#define BOOT_10 35
+#define BOOT_11 36
+#define BOOT_12 37
+#define BOOT_13 38
+#define BOOT_14 39
+#define BOOT_15 40
+#define GPIOC_0 41
+#define GPIOC_1 42
+#define GPIOC_2 43
+#define GPIOC_3 44
+#define GPIOC_4 45
+#define GPIOC_5 46
+#define GPIOC_6 47
+#define GPIOC_7 48
+#define GPIOA_0 49
+#define GPIOA_1 50
+#define GPIOA_2 51
+#define GPIOA_3 52
+#define GPIOA_4 53
+#define GPIOA_5 54
+#define GPIOA_6 55
+#define GPIOA_7 56
+#define GPIOA_8 57
+#define GPIOA_9 58
+#define GPIOA_10 59
+#define GPIOA_11 60
+#define GPIOA_12 61
+#define GPIOA_13 62
+#define GPIOA_14 63
+#define GPIOA_15 64
+#define GPIOX_0 65
+#define GPIOX_1 66
+#define GPIOX_2 67
+#define GPIOX_3 68
+#define GPIOX_4 69
+#define GPIOX_5 70
+#define GPIOX_6 71
+#define GPIOX_7 72
+#define GPIOX_8 73
+#define GPIOX_9 74
+#define GPIOX_10 75
+#define GPIOX_11 76
+#define GPIOX_12 77
+#define GPIOX_13 78
+#define GPIOX_14 79
+#define GPIOX_15 80
+#define GPIOX_16 81
+#define GPIOX_17 82
+#define GPIOX_18 83
+#define GPIOX_19 84
+
+#endif /* _DT_BINDINGS_MESON_G12A_GPIO_H */
--
2.18.0
next prev parent reply other threads:[~2018-07-14 23:27 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-14 23:27 [PATCH v2 0/2] pinctrl: meson-g12a: add pinctrl driver support Yixun Lan
2018-07-14 23:27 ` Yixun Lan [this message]
2018-07-16 18:02 ` [PATCH v2 1/2] documentation: pinctrl: Add compatibles for Amlogic Meson G12A pin controllers Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180714232754.5402-2-yixun.lan@amlogic.com \
--to=yixun.lan@amlogic.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=narmstrong@baylibre.com \
--cc=robh@kernel.org \
--cc=xingyu.chen@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox