From: Jonathan Cameron <jic23@kernel.org>
To: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Brian Masney <masneyb@onstation.org>,
robh+dt@kernel.org, mark.rutland@arm.com, andy.gross@linaro.org,
david.brown@linaro.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
jonathan@marek.ca, jmaneyrol@invensense.com, knaack.h@gmx.de,
lars@metafoo.de, pmeerw@pmeerw.net, mkelly@xevo.com,
fischerdouglasc@gmail.com, bshah@kde.org, ctatlor97@gmail.com
Subject: Re: [PATCH 1/3] iio: imu: mpu6050: add support for 6515 variant
Date: Sun, 15 Jul 2018 09:41:58 +0100 [thread overview]
Message-ID: <20180715094158.08115f93@archlinux> (raw)
In-Reply-To: <20180712154738.00002918@huawei.com>
On Thu, 12 Jul 2018 15:47:38 +0100
Jonathan Cameron <jonathan.cameron@huawei.com> wrote:
> On Tue, 10 Jul 2018 21:09:30 -0400
> Brian Masney <masneyb@onstation.org> wrote:
>
> > This patch adds support for the MPU 6515 variant. Confirmed that the
> > driver functions correctly on a LG Nexus 5 (hammerhead) phone.
> >
> > Signed-off-by: Brian Masney <masneyb@onstation.org>
> > Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
thanks,
Jonathan
> > ---
> > This is a variation of Jonathan Marek's patch from postmarketOS
> > https://gitlab.com/postmarketOS/linux-postmarketos/commit/b8ad1ec1859c8bbcbce94944b3f4dd68f8f9fc37
> > with the following changes:
> >
> > - The driver was previously throwing a 'whoami mismatch got XXX' error.
> > Corrected ordering of hw_info variable to match the index of the
> > inv_devices enum. The mpu6515 needed to come after mpu6500, not
> > mpu6050.
> > - Removed regulator code. See next patch in this series.
> >
> > I got confirmation from Jonathan M. that it was ok for me to submit his
> > patch upstream with these changes.
> >
> > Jonathan C.: I assume that it is ok for the device tree binding
> > documentation to go through IIO? If not, I can split this out into a
> > separate patch if needed.
> A single ID addition is normally uncontroversial enough that we don't bother
> the DT maintainers (though of course they are welcome to look!).
> So this is fine.
> >
> > Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt | 1 +
> > drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 6 ++++++
> > drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 5 +++++
> > drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 ++
> > 4 files changed, 14 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> > index 5f4777e8cc9e..b7def51c8ad9 100644
> > --- a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> > +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt
> > @@ -6,6 +6,7 @@ Required properties:
> > - compatible : should be one of
> > "invensense,mpu6050"
> > "invensense,mpu6500"
> > + "invensense,mpu6515"
> > "invensense,mpu9150"
> > "invensense,mpu9250"
> > "invensense,mpu9255"
> > diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> > index de68e83fc52d..12c1b9507007 100644
> > --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> > +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> > @@ -103,6 +103,12 @@ static const struct inv_mpu6050_hw hw_info[] = {
> > .reg = ®_set_6500,
> > .config = &chip_config_6050,
> > },
> > + {
> > + .whoami = INV_MPU6515_WHOAMI_VALUE,
> > + .name = "MPU6515",
> > + .reg = ®_set_6500,
> > + .config = &chip_config_6050,
> > + },
> > {
> > .whoami = INV_MPU6000_WHOAMI_VALUE,
> > .name = "MPU6000",
> > diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
> > index 495409d56207..dd758e3d403d 100644
> > --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
> > +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
> > @@ -174,6 +174,7 @@ static int inv_mpu_remove(struct i2c_client *client)
> > static const struct i2c_device_id inv_mpu_id[] = {
> > {"mpu6050", INV_MPU6050},
> > {"mpu6500", INV_MPU6500},
> > + {"mpu6515", INV_MPU6515},
> > {"mpu9150", INV_MPU9150},
> > {"mpu9250", INV_MPU9250},
> > {"mpu9255", INV_MPU9255},
> > @@ -192,6 +193,10 @@ static const struct of_device_id inv_of_match[] = {
> > .compatible = "invensense,mpu6500",
> > .data = (void *)INV_MPU6500
> > },
> > + {
> > + .compatible = "invensense,mpu6515",
> > + .data = (void *)INV_MPU6515
> > + },
> > {
> > .compatible = "invensense,mpu9150",
> > .data = (void *)INV_MPU9150
> > diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> > index de8391693e17..e69a59659dbc 100644
> > --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> > +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> > @@ -71,6 +71,7 @@ struct inv_mpu6050_reg_map {
> > enum inv_devices {
> > INV_MPU6050,
> > INV_MPU6500,
> > + INV_MPU6515,
> > INV_MPU6000,
> > INV_MPU9150,
> > INV_MPU9250,
> > @@ -256,6 +257,7 @@ struct inv_mpu6050_state {
> > #define INV_MPU9150_WHOAMI_VALUE 0x68
> > #define INV_MPU9250_WHOAMI_VALUE 0x71
> > #define INV_MPU9255_WHOAMI_VALUE 0x73
> > +#define INV_MPU6515_WHOAMI_VALUE 0x74
> > #define INV_ICM20608_WHOAMI_VALUE 0xAF
> >
> > /* scan element definition */
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-07-15 8:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-11 1:09 [PATCH 0/3] ARM: dts: qcom: msm8974-hammerhead: add support for mpu6515 Brian Masney
2018-07-11 1:09 ` [PATCH 1/3] iio: imu: mpu6050: add support for 6515 variant Brian Masney
2018-07-12 14:47 ` Jonathan Cameron
2018-07-15 8:41 ` Jonathan Cameron [this message]
2018-07-11 1:09 ` [PATCH 2/3] iio: imu: mpu6050: add support for regulator framework Brian Masney
2018-07-11 8:50 ` kbuild test robot
2018-07-11 9:07 ` Brian Masney
2018-07-11 10:04 ` Himanshu Jha
2018-07-11 10:31 ` Brian Masney
2018-07-11 12:29 ` Jean-Baptiste Maneyrol
2018-07-11 13:00 ` Brian Masney
2018-07-12 14:45 ` Jonathan Cameron
2018-07-11 1:09 ` [PATCH 3/3] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515 Brian Masney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180715094158.08115f93@archlinux \
--to=jic23@kernel.org \
--cc=andy.gross@linaro.org \
--cc=bshah@kde.org \
--cc=ctatlor97@gmail.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=fischerdouglasc@gmail.com \
--cc=jmaneyrol@invensense.com \
--cc=jonathan.cameron@huawei.com \
--cc=jonathan@marek.ca \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=masneyb@onstation.org \
--cc=mkelly@xevo.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).