From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Belloni Subject: [PATCH 5/5] mips: dts: mscc: enable i2c on ocelot_pcb123 Date: Tue, 17 Jul 2018 13:48:37 +0200 Message-ID: <20180717114837.21839-6-alexandre.belloni@bootlin.com> References: <20180717114837.21839-1-alexandre.belloni@bootlin.com> Return-path: In-Reply-To: <20180717114837.21839-1-alexandre.belloni@bootlin.com> Sender: linux-kernel-owner@vger.kernel.org To: Wolfram Sang , Jarkko Nikula , James Hogan Cc: Paul Burton , Andy Shevchenko , Mika Westerberg , linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, Thomas Petazzoni , Allan Nielsen , Alexandre Belloni List-Id: devicetree@vger.kernel.org Enable the i2c controller on ocelot PCB123. While there are no i2c devices on the board itself, it can be used to control the SFP transceivers. Signed-off-by: Alexandre Belloni --- arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts index 4ccd65379059..d933f1cd8a60 100644 --- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts +++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts @@ -26,6 +26,11 @@ status = "okay"; }; +&i2c { + clock-frequency = <100000>; + status = "okay"; +}; + &mdio0 { status = "okay"; }; -- 2.18.0