From mboxrd@z Thu Jan  1 00:00:00 1970
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: Re: [PATCH v6 4/5] arm64: dts: actions: Add Clock Management Unit
 for S700
Date: Tue, 17 Jul 2018 19:44:29 +0530
Message-ID: <20180717141429.GC19076@mani>
References: <20180715203524.11948-1-sravanhome@gmail.com>
 <20180715203524.11948-5-sravanhome@gmail.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <20180715203524.11948-5-sravanhome@gmail.com>
Sender: linux-kernel-owner@vger.kernel.org
To: Saravanan Sekar <sravanhome@gmail.com>
Cc: afaerber@suse.de, sboyd@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, linux@cubietech.com, support@cubietech.com, catalin.marinas@arm.com, mturquette@baylibre.com, will.deacon@arm.com, linux-kernel@vger.kernel.org, thomas.liau@actions-semi.com, darren@cubietech.com, robh+dt@kernel.org, jeff.chen@actions-semi.com, pn@denx.de, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, mp-cs@actions-semi.com
List-Id: devicetree@vger.kernel.org

Hi Saravanan,

On Sun, Jul 15, 2018 at 10:35:23PM +0200, Saravanan Sekar wrote:
> Add Clock Management Unit for Actions Semi S700 SoC.
> 
> Signed-off-by: Parthiban Nallathambi <pn@denx.de>
> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
> ---
>  arch/arm64/boot/dts/actions/s700.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
> index 66dd5309f0a2..4497741d48b2 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -4,6 +4,7 @@
>   */
>  
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/actions,s700-cmu.h>
>  
>  / {
>  	compatible = "actions,s700";
> @@ -44,6 +45,13 @@
>  		};
>  	};
>  
> +	cmu: clock-controller@e0168000 {
> +		compatible = "actions,s700-cmu";
> +		reg = <0x0 0xe0168000 0x0 0x1000>;
> +		clocks = <&hosc>, <&losc>;
> +		#clock-cells = <1>;
> +	};
> +

CMU node should come under soc, ordered based on the address.

Thanks,
Mani

>  	reserved-memory {
>  		#address-cells = <2>;
>  		#size-cells = <2>;
> @@ -87,6 +95,12 @@
>  		#clock-cells = <0>;
>  	};
>  
> +	losc: losc {
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +		#clock-cells = <0>;
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		#address-cells = <2>;
> -- 
> 2.18.0
>