[PATCH v2 00/17] JZ4780 DMA patchset v2

[PATCH v2 00/17] JZ4780 DMA patchset v2

[Paul Cercueil]

Hi,

This is the version 2 of my jz4780-dma driver update patchset.

Changelog:

- All documentation changes have been moved to one single patch [01/17].

- The new patch [02/17] enforces that we're probed from devicetree.

- The driver will not fail if only one memory resource has been supplied
  in the devicetree, to keep compatibility with old devicetree files.

- A new patch [17/17] adds a devicetree node for the DMA driver in the
  JZ4740 DTS file.

- Some other small changes; see per-file changelog.

Regards,
-Paul

[PATCH v2 01/17] doc: dt-bindings: jz4780-dma: Update bindings to reflect driver changes

[Paul Cercueil]

The driver is now compatible with four SoCs: JZ4780, JZ4770, JZ4725B and
JZ4740.

Besides, it now expects the devicetree to supply a second memory
resource. This resource is mandatory on the newly supported SoCs.
For the JZ4780, new devicetree code must also provide it, although the
driver is still compatible with older devicetree binaries.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 Documentation/devicetree/bindings/dma/jz4780-dma.txt | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

 v2: New patch in this series; regroups the changes made to the
 jz4780-dma.txt doc file in the previous version of the patchset.

diff --git a/Documentation/devicetree/bindings/dma/jz4780-dma.txt b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
index f25feee62b15..5d302b488e88 100644
--- a/Documentation/devicetree/bindings/dma/jz4780-dma.txt
+++ b/Documentation/devicetree/bindings/dma/jz4780-dma.txt
@@ -2,8 +2,13 @@
 
 Required properties:
 
-- compatible: Should be "ingenic,jz4780-dma"
-- reg: Should contain the DMA controller registers location and length.
+- compatible: Should be one of:
+  * ingenic,jz4780-dma
+  * ingenic,jz4770-dma
+  * ingenic,jz4725b-dma
+  * ingenic,jz4740-dma
+- reg: Should contain the DMA channel registers location and length, followed
+  by the DMA controller registers location and length.
 - interrupts: Should contain the interrupt specifier of the DMA controller.
 - interrupt-parent: Should be the phandle of the interrupt controller that
 - clocks: Should contain a clock specifier for the JZ4780 PDMA clock.
@@ -22,7 +27,8 @@ Example:
 
 dma: dma@13420000 {
 	compatible = "ingenic,jz4780-dma";
-	reg = <0x13420000 0x10000>;
+	reg = <0x13420000 0x400
+	       0x13421000 0x40>;
 
 	interrupt-parent = <&intc>;
 	interrupts = <10>;
-- 
2.11.0

[PATCH v2 02/17] dmaengine: dma-jz4780: Return error if not probed from DT

[Paul Cercueil]

The driver calls clk_get() with the clock name set to NULL, which means
that the driver could only work when probed from devicetree. From now
on, we explicitly require the driver to be probed from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 drivers/dma/dma-jz4780.c | 5 +++++
 1 file changed, 5 insertions(+)

 v2: New patch

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 85820a2d69d4..987899610b46 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -761,6 +761,11 @@ static int jz4780_dma_probe(struct platform_device *pdev)
 	struct resource *res;
 	int i, ret;
 
+	if (!dev->of_node) {
+		dev_err(dev, "This driver must be probed from devicetree\n");
+		return -EINVAL;
+	}
+
 	jzdma = devm_kzalloc(dev, sizeof(*jzdma), GFP_KERNEL);
 	if (!jzdma)
 		return -ENOMEM;
-- 
2.11.0

[PATCH v2 03/17] dmaengine: dma-jz4780: Avoid hardcoding number of channels

[Paul Cercueil]

As part of the work to support various other Ingenic JZ47xx SoC versions,
which don't feature the same number of DMA channels per core, we now
deduce the number of DMA channels available from the devicetree
compatible string.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 drivers/dma/dma-jz4780.c | 53 +++++++++++++++++++++++++++++++++++-------------
 1 file changed, 39 insertions(+), 14 deletions(-)

 v2: - don't hardcode jz_version to ID_JZ4780 when not probed from DT,
       because it cannot happen
     - Put SoC-specific data into a jz4780_dma_soc_data structure

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 987899610b46..a26107c85ee7 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_dma.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -23,8 +24,6 @@
 #include "dmaengine.h"
 #include "virt-dma.h"
 
-#define JZ_DMA_NR_CHANNELS	32
-
 /* Global registers. */
 #define JZ_DMA_REG_DMAC		0x1000
 #define JZ_DMA_REG_DIRQP	0x1004
@@ -135,14 +134,24 @@ struct jz4780_dma_chan {
 	unsigned int curr_hwdesc;
 };
 
+enum jz_version {
+	ID_JZ4780,
+};
+
+struct jz4780_dma_soc_data {
+	unsigned int nb_channels;
+};
+
 struct jz4780_dma_dev {
 	struct dma_device dma_device;
 	void __iomem *base;
 	struct clk *clk;
 	unsigned int irq;
+	enum jz_version version;
+	const struct jz4780_dma_soc_data *soc_data;
 
 	uint32_t chan_reserved;
-	struct jz4780_dma_chan chan[JZ_DMA_NR_CHANNELS];
+	struct jz4780_dma_chan chan[];
 };
 
 struct jz4780_dma_filter_data {
@@ -648,7 +657,7 @@ static irqreturn_t jz4780_dma_irq_handler(int irq, void *data)
 
 	pending = jz4780_dma_readl(jzdma, JZ_DMA_REG_DIRQP);
 
-	for (i = 0; i < JZ_DMA_NR_CHANNELS; i++) {
+	for (i = 0; i < jzdma->soc_data->nb_channels; i++) {
 		if (!(pending & (1<<i)))
 			continue;
 
@@ -728,7 +737,7 @@ static struct dma_chan *jz4780_of_dma_xlate(struct of_phandle_args *dma_spec,
 	data.channel = dma_spec->args[1];
 
 	if (data.channel > -1) {
-		if (data.channel >= JZ_DMA_NR_CHANNELS) {
+		if (data.channel >= jzdma->soc_data->nb_channels) {
 			dev_err(jzdma->dma_device.dev,
 				"device requested non-existent channel %u\n",
 				data.channel);
@@ -752,13 +761,27 @@ static struct dma_chan *jz4780_of_dma_xlate(struct of_phandle_args *dma_spec,
 	}
 }
 
+static const struct jz4780_dma_soc_data jz4780_dma_soc_data[] = {
+	[ID_JZ4780] = { .nb_channels = 32, },
+};
+
+static const struct of_device_id jz4780_dma_dt_match[] = {
+	{ .compatible = "ingenic,jz4780-dma", .data = (void *)ID_JZ4780 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, jz4780_dma_dt_match);
+
 static int jz4780_dma_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id = of_match_device(
+			jz4780_dma_dt_match, dev);
+	const struct jz4780_dma_soc_data *soc_data;
 	struct jz4780_dma_dev *jzdma;
 	struct jz4780_dma_chan *jzchan;
 	struct dma_device *dd;
 	struct resource *res;
+	enum jz_version version;
 	int i, ret;
 
 	if (!dev->of_node) {
@@ -766,10 +789,18 @@ static int jz4780_dma_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	jzdma = devm_kzalloc(dev, sizeof(*jzdma), GFP_KERNEL);
+	version = (enum jz_version)of_id->data;
+	soc_data = &jz4780_dma_soc_data[version];
+
+	jzdma = devm_kzalloc(dev, sizeof(*jzdma)
+				+ sizeof(*jzdma->chan) * soc_data->nb_channels,
+				GFP_KERNEL);
 	if (!jzdma)
 		return -ENOMEM;
 
+	jzdma->soc_data = soc_data;
+	jzdma->version = version;
+
 	platform_set_drvdata(pdev, jzdma);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -844,7 +875,7 @@ static int jz4780_dma_probe(struct platform_device *pdev)
 
 	INIT_LIST_HEAD(&dd->channels);
 
-	for (i = 0; i < JZ_DMA_NR_CHANNELS; i++) {
+	for (i = 0; i < soc_data->nb_channels; i++) {
 		jzchan = &jzdma->chan[i];
 		jzchan->id = i;
 
@@ -889,19 +920,13 @@ static int jz4780_dma_remove(struct platform_device *pdev)
 
 	free_irq(jzdma->irq, jzdma);
 
-	for (i = 0; i < JZ_DMA_NR_CHANNELS; i++)
+	for (i = 0; i < jzdma->soc_data->nb_channels; i++)
 		tasklet_kill(&jzdma->chan[i].vchan.task);
 
 	dma_async_device_unregister(&jzdma->dma_device);
 	return 0;
 }
 
-static const struct of_device_id jz4780_dma_dt_match[] = {
-	{ .compatible = "ingenic,jz4780-dma", .data = NULL },
-	{},
-};
-MODULE_DEVICE_TABLE(of, jz4780_dma_dt_match);
-
 static struct platform_driver jz4780_dma_driver = {
 	.probe		= jz4780_dma_probe,
 	.remove		= jz4780_dma_remove,
-- 
2.11.0

[PATCH v2 04/17] dmaengine: dma-jz4780: Separate chan/ctrl registers

[Paul Cercueil]

The register area of the JZ4780 DMA core can be split into different
sections for different purposes:

* one set of registers is used to perform actions at the DMA core level,
that will generally affect all channels;

* one set of registers per DMA channel, to perform actions at the DMA
channel level, that will only affect the channel in question.

The problem rises when trying to support new versions of the JZ47xx
Ingenic SoC. For instance, the JZ4770 has two DMA cores, each one
with six DMA channels, and the register sets are interleaved:
<DMA0 chan regs> <DMA1 chan regs> <DMA0 ctrl regs> <DMA1 ctrl regs>

By using one memory resource for the channel-specific registers and
one memory resource for the core-specific registers, we can support
the JZ4770, by initializing the driver once per DMA core with different
addresses.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 drivers/dma/dma-jz4780.c | 115 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 74 insertions(+), 41 deletions(-)

 v2: - Add a fallback mechanism for JZ4780 if the second memory resource
       was not supplied in the devicetree.
     - The documentation update was moved to patch 01/17

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index a26107c85ee7..2f17a0fb1e5c 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -25,26 +25,26 @@
 #include "virt-dma.h"
 
 /* Global registers. */
-#define JZ_DMA_REG_DMAC		0x1000
-#define JZ_DMA_REG_DIRQP	0x1004
-#define JZ_DMA_REG_DDR		0x1008
-#define JZ_DMA_REG_DDRS		0x100c
-#define JZ_DMA_REG_DMACP	0x101c
-#define JZ_DMA_REG_DSIRQP	0x1020
-#define JZ_DMA_REG_DSIRQM	0x1024
-#define JZ_DMA_REG_DCIRQP	0x1028
-#define JZ_DMA_REG_DCIRQM	0x102c
+#define JZ_DMA_REG_DMAC		0x00
+#define JZ_DMA_REG_DIRQP	0x04
+#define JZ_DMA_REG_DDR		0x08
+#define JZ_DMA_REG_DDRS		0x0c
+#define JZ_DMA_REG_DMACP	0x1c
+#define JZ_DMA_REG_DSIRQP	0x20
+#define JZ_DMA_REG_DSIRQM	0x24
+#define JZ_DMA_REG_DCIRQP	0x28
+#define JZ_DMA_REG_DCIRQM	0x2c
 
 /* Per-channel registers. */
 #define JZ_DMA_REG_CHAN(n)	(n * 0x20)
-#define JZ_DMA_REG_DSA(n)	(0x00 + JZ_DMA_REG_CHAN(n))
-#define JZ_DMA_REG_DTA(n)	(0x04 + JZ_DMA_REG_CHAN(n))
-#define JZ_DMA_REG_DTC(n)	(0x08 + JZ_DMA_REG_CHAN(n))
-#define JZ_DMA_REG_DRT(n)	(0x0c + JZ_DMA_REG_CHAN(n))
-#define JZ_DMA_REG_DCS(n)	(0x10 + JZ_DMA_REG_CHAN(n))
-#define JZ_DMA_REG_DCM(n)	(0x14 + JZ_DMA_REG_CHAN(n))
-#define JZ_DMA_REG_DDA(n)	(0x18 + JZ_DMA_REG_CHAN(n))
-#define JZ_DMA_REG_DSD(n)	(0x1c + JZ_DMA_REG_CHAN(n))
+#define JZ_DMA_REG_DSA		0x00
+#define JZ_DMA_REG_DTA		0x04
+#define JZ_DMA_REG_DTC		0x08
+#define JZ_DMA_REG_DRT		0x0c
+#define JZ_DMA_REG_DCS		0x10
+#define JZ_DMA_REG_DCM		0x14
+#define JZ_DMA_REG_DDA		0x18
+#define JZ_DMA_REG_DSD		0x1c
 
 #define JZ_DMA_DMAC_DMAE	BIT(0)
 #define JZ_DMA_DMAC_AR		BIT(2)
@@ -85,6 +85,8 @@
 				 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
 				 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
 
+#define JZ4780_DMA_CTRL_OFFSET	0x1000
+
 /**
  * struct jz4780_dma_hwdesc - descriptor structure read by the DMA controller.
  * @dcm: value for the DCM (channel command) register
@@ -144,7 +146,8 @@ struct jz4780_dma_soc_data {
 
 struct jz4780_dma_dev {
 	struct dma_device dma_device;
-	void __iomem *base;
+	void __iomem *chn_base;
+	void __iomem *ctrl_base;
 	struct clk *clk;
 	unsigned int irq;
 	enum jz_version version;
@@ -178,16 +181,28 @@ static inline struct jz4780_dma_dev *jz4780_dma_chan_parent(
 			    dma_device);
 }
 
-static inline uint32_t jz4780_dma_readl(struct jz4780_dma_dev *jzdma,
+static inline uint32_t jz4780_dma_chn_readl(struct jz4780_dma_dev *jzdma,
+	unsigned int chn, unsigned int reg)
+{
+	return readl(jzdma->chn_base + reg + JZ_DMA_REG_CHAN(chn));
+}
+
+static inline void jz4780_dma_chn_writel(struct jz4780_dma_dev *jzdma,
+	unsigned int chn, unsigned int reg, uint32_t val)
+{
+	writel(val, jzdma->chn_base + reg + JZ_DMA_REG_CHAN(chn));
+}
+
+static inline uint32_t jz4780_dma_ctrl_readl(struct jz4780_dma_dev *jzdma,
 	unsigned int reg)
 {
-	return readl(jzdma->base + reg);
+	return readl(jzdma->ctrl_base + reg);
 }
 
-static inline void jz4780_dma_writel(struct jz4780_dma_dev *jzdma,
+static inline void jz4780_dma_ctrl_writel(struct jz4780_dma_dev *jzdma,
 	unsigned int reg, uint32_t val)
 {
-	writel(val, jzdma->base + reg);
+	writel(val, jzdma->ctrl_base + reg);
 }
 
 static struct jz4780_dma_desc *jz4780_dma_desc_alloc(
@@ -482,17 +497,18 @@ static void jz4780_dma_begin(struct jz4780_dma_chan *jzchan)
 	}
 
 	/* Use 8-word descriptors. */
-	jz4780_dma_writel(jzdma, JZ_DMA_REG_DCS(jzchan->id), JZ_DMA_DCS_DES8);
+	jz4780_dma_chn_writel(jzdma, jzchan->id,
+			      JZ_DMA_REG_DCS, JZ_DMA_DCS_DES8);
 
 	/* Write descriptor address and initiate descriptor fetch. */
 	desc_phys = jzchan->desc->desc_phys +
 		    (jzchan->curr_hwdesc * sizeof(*jzchan->desc->desc));
-	jz4780_dma_writel(jzdma, JZ_DMA_REG_DDA(jzchan->id), desc_phys);
-	jz4780_dma_writel(jzdma, JZ_DMA_REG_DDRS, BIT(jzchan->id));
+	jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DDA, desc_phys);
+	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DDRS, BIT(jzchan->id));
 
 	/* Enable the channel. */
-	jz4780_dma_writel(jzdma, JZ_DMA_REG_DCS(jzchan->id),
-			  JZ_DMA_DCS_DES8 | JZ_DMA_DCS_CTE);
+	jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DCS,
+			      JZ_DMA_DCS_DES8 | JZ_DMA_DCS_CTE);
 }
 
 static void jz4780_dma_issue_pending(struct dma_chan *chan)
@@ -518,7 +534,7 @@ static int jz4780_dma_terminate_all(struct dma_chan *chan)
 	spin_lock_irqsave(&jzchan->vchan.lock, flags);
 
 	/* Clear the DMA status and stop the transfer. */
-	jz4780_dma_writel(jzdma, JZ_DMA_REG_DCS(jzchan->id), 0);
+	jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DCS, 0);
 	if (jzchan->desc) {
 		vchan_terminate_vdesc(&jzchan->desc->vdesc);
 		jzchan->desc = NULL;
@@ -567,8 +583,8 @@ static size_t jz4780_dma_desc_residue(struct jz4780_dma_chan *jzchan,
 		residue += desc->desc[i].dtc << jzchan->transfer_shift;
 
 	if (next_sg != 0) {
-		count = jz4780_dma_readl(jzdma,
-					 JZ_DMA_REG_DTC(jzchan->id));
+		count = jz4780_dma_chn_readl(jzdma, jzchan->id,
+					 JZ_DMA_REG_DTC);
 		residue += count << jzchan->transfer_shift;
 	}
 
@@ -615,8 +631,8 @@ static void jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
 
 	spin_lock(&jzchan->vchan.lock);
 
-	dcs = jz4780_dma_readl(jzdma, JZ_DMA_REG_DCS(jzchan->id));
-	jz4780_dma_writel(jzdma, JZ_DMA_REG_DCS(jzchan->id), 0);
+	dcs = jz4780_dma_chn_readl(jzdma, jzchan->id, JZ_DMA_REG_DCS);
+	jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DCS, 0);
 
 	if (dcs & JZ_DMA_DCS_AR) {
 		dev_warn(&jzchan->vchan.chan.dev->device,
@@ -655,7 +671,7 @@ static irqreturn_t jz4780_dma_irq_handler(int irq, void *data)
 	uint32_t pending, dmac;
 	int i;
 
-	pending = jz4780_dma_readl(jzdma, JZ_DMA_REG_DIRQP);
+	pending = jz4780_dma_ctrl_readl(jzdma, JZ_DMA_REG_DIRQP);
 
 	for (i = 0; i < jzdma->soc_data->nb_channels; i++) {
 		if (!(pending & (1<<i)))
@@ -665,12 +681,12 @@ static irqreturn_t jz4780_dma_irq_handler(int irq, void *data)
 	}
 
 	/* Clear halt and address error status of all channels. */
-	dmac = jz4780_dma_readl(jzdma, JZ_DMA_REG_DMAC);
+	dmac = jz4780_dma_ctrl_readl(jzdma, JZ_DMA_REG_DMAC);
 	dmac &= ~(JZ_DMA_DMAC_HLT | JZ_DMA_DMAC_AR);
-	jz4780_dma_writel(jzdma, JZ_DMA_REG_DMAC, dmac);
+	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMAC, dmac);
 
 	/* Clear interrupt pending status. */
-	jz4780_dma_writel(jzdma, JZ_DMA_REG_DIRQP, 0);
+	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DIRQP, 0);
 
 	return IRQ_HANDLED;
 }
@@ -809,9 +825,26 @@ static int jz4780_dma_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	jzdma->base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(jzdma->base))
-		return PTR_ERR(jzdma->base);
+	jzdma->chn_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(jzdma->chn_base))
+		return PTR_ERR(jzdma->chn_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		jzdma->ctrl_base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(jzdma->ctrl_base))
+			return PTR_ERR(jzdma->ctrl_base);
+	} else if (version == ID_JZ4780) {
+		/*
+		 * On JZ4780, if the second memory resource was not supplied,
+		 * assume we're using an old devicetree, and calculate the
+		 * offset to the control registers.
+		 */
+		jzdma->ctrl_base = jzdma->chn_base + JZ4780_DMA_CTRL_OFFSET;
+	} else {
+		dev_err(dev, "failed to get I/O memory\n");
+		return -EINVAL;
+	}
 
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0) {
@@ -869,9 +902,9 @@ static int jz4780_dma_probe(struct platform_device *pdev)
 	 * Also set the FMSC bit - it increases MSC performance, so it makes
 	 * little sense not to enable it.
 	 */
-	jz4780_dma_writel(jzdma, JZ_DMA_REG_DMAC,
+	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMAC,
 			  JZ_DMA_DMAC_DMAE | JZ_DMA_DMAC_FMSC);
-	jz4780_dma_writel(jzdma, JZ_DMA_REG_DMACP, 0);
+	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMACP, 0);
 
 	INIT_LIST_HEAD(&dd->channels);
 
-- 
2.11.0

[PATCH v2 05/17] dmaengine: dma-jz4780: Use 4-word descriptors

[Paul Cercueil]

The only information we use in the 8-word version of the hardware DMA
descriptor that is not present in the 4-word version is the transfer
type, aka. the ID of the source or recipient device.

Since the transfer type will never change for a DMA channel in use,
we can just set it once for all in the corresponding DMA register
before starting any transfer.

This has several benefits:

* the driver will handle twice as many hardware DMA descriptors;

* the driver is closer to support the JZ4740, which only supports 4-word
  hardware DMA descriptors;

* the JZ4770 SoC needs the transfer type to be set in the corresponding
  DMA register anyway, even if 8-word descriptors are in use.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
---
 drivers/dma/dma-jz4780.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

 v2: No change

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 2f17a0fb1e5c..23e92d153919 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -95,17 +95,12 @@
  * @dtc: transfer count (number of blocks of the transfer size specified in DCM
  * to transfer) in the low 24 bits, offset of the next descriptor from the
  * descriptor base address in the upper 8 bits.
- * @sd: target/source stride difference (in stride transfer mode).
- * @drt: request type
  */
 struct jz4780_dma_hwdesc {
 	uint32_t dcm;
 	uint32_t dsa;
 	uint32_t dta;
 	uint32_t dtc;
-	uint32_t sd;
-	uint32_t drt;
-	uint32_t reserved[2];
 };
 
 /* Size of allocations for hardware descriptor blocks. */
@@ -286,7 +281,6 @@ static int jz4780_dma_setup_hwdesc(struct jz4780_dma_chan *jzchan,
 		desc->dcm = JZ_DMA_DCM_SAI;
 		desc->dsa = addr;
 		desc->dta = config->dst_addr;
-		desc->drt = jzchan->transfer_type;
 
 		width = config->dst_addr_width;
 		maxburst = config->dst_maxburst;
@@ -294,7 +288,6 @@ static int jz4780_dma_setup_hwdesc(struct jz4780_dma_chan *jzchan,
 		desc->dcm = JZ_DMA_DCM_DAI;
 		desc->dsa = config->src_addr;
 		desc->dta = addr;
-		desc->drt = jzchan->transfer_type;
 
 		width = config->src_addr_width;
 		maxburst = config->src_maxburst;
@@ -439,9 +432,10 @@ static struct dma_async_tx_descriptor *jz4780_dma_prep_dma_memcpy(
 	tsz = jz4780_dma_transfer_size(dest | src | len,
 				       &jzchan->transfer_shift);
 
+	jzchan->transfer_type = JZ_DMA_DRT_AUTO;
+
 	desc->desc[0].dsa = src;
 	desc->desc[0].dta = dest;
-	desc->desc[0].drt = JZ_DMA_DRT_AUTO;
 	desc->desc[0].dcm = JZ_DMA_DCM_TIE | JZ_DMA_DCM_SAI | JZ_DMA_DCM_DAI |
 			    tsz << JZ_DMA_DCM_TSZ_SHIFT |
 			    JZ_DMA_WIDTH_32_BIT << JZ_DMA_DCM_SP_SHIFT |
@@ -496,9 +490,12 @@ static void jz4780_dma_begin(struct jz4780_dma_chan *jzchan)
 			(jzchan->curr_hwdesc + 1) % jzchan->desc->count;
 	}
 
-	/* Use 8-word descriptors. */
-	jz4780_dma_chn_writel(jzdma, jzchan->id,
-			      JZ_DMA_REG_DCS, JZ_DMA_DCS_DES8);
+	/* Use 4-word descriptors. */
+	jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DCS, 0);
+
+	/* Set transfer type. */
+	jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DRT,
+			      jzchan->transfer_type);
 
 	/* Write descriptor address and initiate descriptor fetch. */
 	desc_phys = jzchan->desc->desc_phys +
@@ -508,7 +505,7 @@ static void jz4780_dma_begin(struct jz4780_dma_chan *jzchan)
 
 	/* Enable the channel. */
 	jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DCS,
-			      JZ_DMA_DCS_DES8 | JZ_DMA_DCS_CTE);
+			      JZ_DMA_DCS_CTE);
 }
 
 static void jz4780_dma_issue_pending(struct dma_chan *chan)
-- 
2.11.0

[PATCH v2 06/17] dmaengine: dma-jz4780: Add support for the JZ4770 SoC

[Paul Cercueil]

The JZ4770 SoC has two DMA cores, each one featuring six DMA channels.
The major change is that each channel's clock can be enabled or disabled
through register writes.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 drivers/dma/Kconfig      |  2 +-
 drivers/dma/dma-jz4780.c | 46 +++++++++++++++++++++++++++++++++++++++-------
 2 files changed, 40 insertions(+), 8 deletions(-)

 v2: - Move transfer_ord_max variable to the new jz4780_dma_soc_data
       structure
     - The documentation update is now in patch 01/17

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index ca1680afa20a..48d25dccedb7 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -143,7 +143,7 @@ config DMA_JZ4740
 
 config DMA_JZ4780
 	tristate "JZ4780 DMA support"
-	depends on MACH_JZ4780 || COMPILE_TEST
+	depends on MACH_JZ4780 || MACH_JZ4770 || COMPILE_TEST
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 23e92d153919..a5f4a8d54516 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -29,6 +29,9 @@
 #define JZ_DMA_REG_DIRQP	0x04
 #define JZ_DMA_REG_DDR		0x08
 #define JZ_DMA_REG_DDRS		0x0c
+#define JZ_DMA_REG_DCKE		0x10
+#define JZ_DMA_REG_DCKES	0x14
+#define JZ_DMA_REG_DCKEC	0x18
 #define JZ_DMA_REG_DMACP	0x1c
 #define JZ_DMA_REG_DSIRQP	0x20
 #define JZ_DMA_REG_DSIRQM	0x24
@@ -132,11 +135,13 @@ struct jz4780_dma_chan {
 };
 
 enum jz_version {
+	ID_JZ4770,
 	ID_JZ4780,
 };
 
 struct jz4780_dma_soc_data {
 	unsigned int nb_channels;
+	unsigned int transfer_ord_max;
 };
 
 struct jz4780_dma_dev {
@@ -200,6 +205,20 @@ static inline void jz4780_dma_ctrl_writel(struct jz4780_dma_dev *jzdma,
 	writel(val, jzdma->ctrl_base + reg);
 }
 
+static inline void jz4780_dma_chan_enable(struct jz4780_dma_dev *jzdma,
+	unsigned int chn)
+{
+	if (jzdma->version == ID_JZ4770)
+		jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DCKES, BIT(chn));
+}
+
+static inline void jz4780_dma_chan_disable(struct jz4780_dma_dev *jzdma,
+	unsigned int chn)
+{
+	if (jzdma->version == ID_JZ4770)
+		jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DCKEC, BIT(chn));
+}
+
 static struct jz4780_dma_desc *jz4780_dma_desc_alloc(
 	struct jz4780_dma_chan *jzchan, unsigned int count,
 	enum dma_transaction_type type)
@@ -234,8 +253,10 @@ static void jz4780_dma_desc_free(struct virt_dma_desc *vdesc)
 	kfree(desc);
 }
 
-static uint32_t jz4780_dma_transfer_size(unsigned long val, uint32_t *shift)
+static uint32_t jz4780_dma_transfer_size(struct jz4780_dma_chan *jzchan,
+	unsigned long val, uint32_t *shift)
 {
+	struct jz4780_dma_dev *jzdma = jz4780_dma_chan_parent(jzchan);
 	int ord = ffs(val) - 1;
 
 	/*
@@ -247,8 +268,8 @@ static uint32_t jz4780_dma_transfer_size(unsigned long val, uint32_t *shift)
 	 */
 	if (ord == 3)
 		ord = 2;
-	else if (ord > 7)
-		ord = 7;
+	else if (ord > jzdma->soc_data->transfer_ord_max)
+		ord = jzdma->soc_data->transfer_ord_max;
 
 	*shift = ord;
 
@@ -300,7 +321,7 @@ static int jz4780_dma_setup_hwdesc(struct jz4780_dma_chan *jzchan,
 	 * divisible by the transfer size, and we must not use more than the
 	 * maximum burst specified by the user.
 	 */
-	tsz = jz4780_dma_transfer_size(addr | len | (width * maxburst),
+	tsz = jz4780_dma_transfer_size(jzchan, addr | len | (width * maxburst),
 				       &jzchan->transfer_shift);
 
 	switch (width) {
@@ -429,7 +450,7 @@ static struct dma_async_tx_descriptor *jz4780_dma_prep_dma_memcpy(
 	if (!desc)
 		return NULL;
 
-	tsz = jz4780_dma_transfer_size(dest | src | len,
+	tsz = jz4780_dma_transfer_size(jzchan, dest | src | len,
 				       &jzchan->transfer_shift);
 
 	jzchan->transfer_type = JZ_DMA_DRT_AUTO;
@@ -490,6 +511,9 @@ static void jz4780_dma_begin(struct jz4780_dma_chan *jzchan)
 			(jzchan->curr_hwdesc + 1) % jzchan->desc->count;
 	}
 
+	/* Enable the channel's clock. */
+	jz4780_dma_chan_enable(jzdma, jzchan->id);
+
 	/* Use 4-word descriptors. */
 	jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DCS, 0);
 
@@ -537,6 +561,8 @@ static int jz4780_dma_terminate_all(struct dma_chan *chan)
 		jzchan->desc = NULL;
 	}
 
+	jz4780_dma_chan_disable(jzdma, jzchan->id);
+
 	vchan_get_all_descriptors(&jzchan->vchan, &head);
 
 	spin_unlock_irqrestore(&jzchan->vchan.lock, flags);
@@ -548,8 +574,10 @@ static int jz4780_dma_terminate_all(struct dma_chan *chan)
 static void jz4780_dma_synchronize(struct dma_chan *chan)
 {
 	struct jz4780_dma_chan *jzchan = to_jz4780_dma_chan(chan);
+	struct jz4780_dma_dev *jzdma = jz4780_dma_chan_parent(jzchan);
 
 	vchan_synchronize(&jzchan->vchan);
+	jz4780_dma_chan_disable(jzdma, jzchan->id);
 }
 
 static int jz4780_dma_config(struct dma_chan *chan,
@@ -775,10 +803,12 @@ static struct dma_chan *jz4780_of_dma_xlate(struct of_phandle_args *dma_spec,
 }
 
 static const struct jz4780_dma_soc_data jz4780_dma_soc_data[] = {
-	[ID_JZ4780] = { .nb_channels = 32, },
+	[ID_JZ4770] = { .nb_channels = 6, .transfer_ord_max = 6, },
+	[ID_JZ4780] = { .nb_channels = 32, .transfer_ord_max = 7, },
 };
 
 static const struct of_device_id jz4780_dma_dt_match[] = {
+	{ .compatible = "ingenic,jz4770-dma", .data = (void *)ID_JZ4770 },
 	{ .compatible = "ingenic,jz4780-dma", .data = (void *)ID_JZ4780 },
 	{},
 };
@@ -901,7 +931,9 @@ static int jz4780_dma_probe(struct platform_device *pdev)
 	 */
 	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMAC,
 			  JZ_DMA_DMAC_DMAE | JZ_DMA_DMAC_FMSC);
-	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMACP, 0);
+
+	if (jzdma->version == ID_JZ4780)
+		jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMACP, 0);
 
 	INIT_LIST_HEAD(&dd->channels);
 
-- 
2.11.0

[PATCH v2 07/17] dmaengine: dma-jz4780: Add support for the JZ4740 SoC

[Paul Cercueil]

The JZ4740 SoC has a single DMA core starring six DMA channels.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
---
 drivers/dma/Kconfig      | 2 +-
 drivers/dma/dma-jz4780.c | 3 +++
 2 files changed, 4 insertions(+), 1 deletion(-)

 v2: The documentation update is now in patch 01/17

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 48d25dccedb7..a935d15ec581 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -143,7 +143,7 @@ config DMA_JZ4740
 
 config DMA_JZ4780
 	tristate "JZ4780 DMA support"
-	depends on MACH_JZ4780 || MACH_JZ4770 || COMPILE_TEST
+	depends on MACH_INGENIC || COMPILE_TEST
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index a5f4a8d54516..084d4023637e 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -135,6 +135,7 @@ struct jz4780_dma_chan {
 };
 
 enum jz_version {
+	ID_JZ4740,
 	ID_JZ4770,
 	ID_JZ4780,
 };
@@ -803,11 +804,13 @@ static struct dma_chan *jz4780_of_dma_xlate(struct of_phandle_args *dma_spec,
 }
 
 static const struct jz4780_dma_soc_data jz4780_dma_soc_data[] = {
+	[ID_JZ4740] = { .nb_channels = 6, .transfer_ord_max = 5, },
 	[ID_JZ4770] = { .nb_channels = 6, .transfer_ord_max = 6, },
 	[ID_JZ4780] = { .nb_channels = 32, .transfer_ord_max = 7, },
 };
 
 static const struct of_device_id jz4780_dma_dt_match[] = {
+	{ .compatible = "ingenic,jz4740-dma", .data = (void *)ID_JZ4740 },
 	{ .compatible = "ingenic,jz4770-dma", .data = (void *)ID_JZ4770 },
 	{ .compatible = "ingenic,jz4780-dma", .data = (void *)ID_JZ4780 },
 	{},
-- 
2.11.0

[PATCH v2 08/17] dmaengine: dma-jz4780: Add support for the JZ4725B SoC

[Paul Cercueil]

The JZ4725B has one DMA core starring six DMA channels.
As for the JZ4770, each DMA channel's clock can be enabled with
a register write, the difference here being that once started, it
is not possible to turn it off.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
---
 drivers/dma/dma-jz4780.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

 v2: - Add comments about channel enabling/disabling
     - The documentation update is now in patch 01/17

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 084d4023637e..88ce3f0157f6 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -136,6 +136,7 @@ struct jz4780_dma_chan {
 
 enum jz_version {
 	ID_JZ4740,
+	ID_JZ4725B,
 	ID_JZ4770,
 	ID_JZ4780,
 };
@@ -209,8 +210,12 @@ static inline void jz4780_dma_ctrl_writel(struct jz4780_dma_dev *jzdma,
 static inline void jz4780_dma_chan_enable(struct jz4780_dma_dev *jzdma,
 	unsigned int chn)
 {
-	if (jzdma->version == ID_JZ4770)
+	if (jzdma->version == ID_JZ4770) {
 		jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DCKES, BIT(chn));
+	} else if (jzdma->version == ID_JZ4725B) {
+		/* JZ4725B has no DCKES, it uses DCKE to enable channels */
+		jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DCKE, BIT(chn));
+	}
 }
 
 static inline void jz4780_dma_chan_disable(struct jz4780_dma_dev *jzdma,
@@ -218,6 +223,8 @@ static inline void jz4780_dma_chan_disable(struct jz4780_dma_dev *jzdma,
 {
 	if (jzdma->version == ID_JZ4770)
 		jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DCKEC, BIT(chn));
+
+	/* On JZ4725B it is not possible to stop a DMA channel once enabled */
 }
 
 static struct jz4780_dma_desc *jz4780_dma_desc_alloc(
@@ -805,12 +812,14 @@ static struct dma_chan *jz4780_of_dma_xlate(struct of_phandle_args *dma_spec,
 
 static const struct jz4780_dma_soc_data jz4780_dma_soc_data[] = {
 	[ID_JZ4740] = { .nb_channels = 6, .transfer_ord_max = 5, },
+	[ID_JZ4725B] = { .nb_channels = 6, .transfer_ord_max = 5, },
 	[ID_JZ4770] = { .nb_channels = 6, .transfer_ord_max = 6, },
 	[ID_JZ4780] = { .nb_channels = 32, .transfer_ord_max = 7, },
 };
 
 static const struct of_device_id jz4780_dma_dt_match[] = {
 	{ .compatible = "ingenic,jz4740-dma", .data = (void *)ID_JZ4740 },
+	{ .compatible = "ingenic,jz4725b-dma", .data = (void *)ID_JZ4725B },
 	{ .compatible = "ingenic,jz4770-dma", .data = (void *)ID_JZ4770 },
 	{ .compatible = "ingenic,jz4780-dma", .data = (void *)ID_JZ4780 },
 	{},
-- 
2.11.0

[PATCH v2 09/17] dmaengine: dma-jz4780: Enable Fast DMA to the AIC

[Paul Cercueil]

With the fast DMA bit set, the DMA will transfer twice as much data
per clock period to the AIC, so there is little point not to set it.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
---
 drivers/dma/dma-jz4780.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

 v2: No change

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 88ce3f0157f6..3c9d3952e23a 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -52,6 +52,7 @@
 #define JZ_DMA_DMAC_DMAE	BIT(0)
 #define JZ_DMA_DMAC_AR		BIT(2)
 #define JZ_DMA_DMAC_HLT		BIT(3)
+#define JZ_DMA_DMAC_FAIC	BIT(27)
 #define JZ_DMA_DMAC_FMSC	BIT(31)
 
 #define JZ_DMA_DRT_AUTO		0x8
@@ -941,8 +942,8 @@ static int jz4780_dma_probe(struct platform_device *pdev)
 	 * Also set the FMSC bit - it increases MSC performance, so it makes
 	 * little sense not to enable it.
 	 */
-	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMAC,
-			  JZ_DMA_DMAC_DMAE | JZ_DMA_DMAC_FMSC);
+	jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMAC, JZ_DMA_DMAC_DMAE |
+			       JZ_DMA_DMAC_FAIC | JZ_DMA_DMAC_FMSC);
 
 	if (jzdma->version == ID_JZ4780)
 		jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMACP, 0);
-- 
2.11.0

[PATCH v2 10/17] dmaengine: dma-jz4780: Add missing residue DTC mask

[Paul Cercueil]

From: Daniel Silsby <dansilsby@gmail.com>

The 'dtc' word in jz DMA descriptors contains two fields: The
lowest 24 bits are the transfer count, and upper 8 bits are the DOA
offset to next descriptor. The upper 8 bits are now correctly masked
off when computing residue in jz4780_dma_desc_residue(). Note that
reads of the DTCn hardware reg are automatically masked this way.

Signed-off-by: Daniel Silsby <dansilsby@gmail.com>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 drivers/dma/dma-jz4780.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

 v2: No change

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 3c9d3952e23a..fa926de082ba 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -614,7 +614,8 @@ static size_t jz4780_dma_desc_residue(struct jz4780_dma_chan *jzchan,
 	residue = 0;
 
 	for (i = next_sg; i < desc->count; i++)
-		residue += desc->desc[i].dtc << jzchan->transfer_shift;
+		residue += (desc->desc[i].dtc & 0xffffff) <<
+			jzchan->transfer_shift;
 
 	if (next_sg != 0) {
 		count = jz4780_dma_chn_readl(jzdma, jzchan->id,
-- 
2.11.0

[PATCH v2 11/17] dmaengine: dma-jz4780: Simplify jz4780_dma_desc_residue()

[Paul Cercueil]

From: Daniel Silsby <dansilsby@gmail.com>

Simple cleanup, no changes to actual logic here.

Signed-off-by: Daniel Silsby <dansilsby@gmail.com>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 drivers/dma/dma-jz4780.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)

 v2: No change

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index fa926de082ba..cc2a86844db4 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -608,22 +608,17 @@ static size_t jz4780_dma_desc_residue(struct jz4780_dma_chan *jzchan,
 	struct jz4780_dma_desc *desc, unsigned int next_sg)
 {
 	struct jz4780_dma_dev *jzdma = jz4780_dma_chan_parent(jzchan);
-	unsigned int residue, count;
+	unsigned int count = 0;
 	unsigned int i;
 
-	residue = 0;
-
 	for (i = next_sg; i < desc->count; i++)
-		residue += (desc->desc[i].dtc & 0xffffff) <<
-			jzchan->transfer_shift;
+		count += desc->desc[i].dtc & 0xffffff;
 
-	if (next_sg != 0) {
-		count = jz4780_dma_chn_readl(jzdma, jzchan->id,
+	if (next_sg != 0)
+		count += jz4780_dma_chn_readl(jzdma, jzchan->id,
 					 JZ_DMA_REG_DTC);
-		residue += count << jzchan->transfer_shift;
-	}
 
-	return residue;
+	return count << jzchan->transfer_shift;
 }
 
 static enum dma_status jz4780_dma_tx_status(struct dma_chan *chan,
-- 
2.11.0

[PATCH v2 12/17] dmaengine: dma-jz4780: Set DTCn register explicitly

[Paul Cercueil]

From: Daniel Silsby <dansilsby@gmail.com>

Normally, we wouldn't set the channel transfer count register directly
when using descriptor-driven transfers. However, there is no harm in
doing so, and it allows jz4780_dma_desc_residue() to report the correct
residue of an ongoing transfer, no matter when it is called.

Signed-off-by: Daniel Silsby <dansilsby@gmail.com>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 drivers/dma/dma-jz4780.c | 9 +++++++++
 1 file changed, 9 insertions(+)

 v2: No change

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index cc2a86844db4..78849131c81d 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -530,6 +530,15 @@ static void jz4780_dma_begin(struct jz4780_dma_chan *jzchan)
 	jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DRT,
 			      jzchan->transfer_type);
 
+	/*
+	 * Set the transfer count. This is redundant for a descriptor-driven
+	 * transfer. However, there can be a delay between the transfer start
+	 * time and when DTCn reg contains the new transfer count. Setting
+	 * it explicitly ensures residue is computed correctly at all times.
+	 */
+	jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DTC,
+				jzchan->desc->desc[jzchan->curr_hwdesc].dtc);
+
 	/* Write descriptor address and initiate descriptor fetch. */
 	desc_phys = jzchan->desc->desc_phys +
 		    (jzchan->curr_hwdesc * sizeof(*jzchan->desc->desc));
-- 
2.11.0

[PATCH v2 13/17] dmaengine: dma-jz4780: Further residue status fix

[Paul Cercueil]

From: Daniel Silsby <dansilsby@gmail.com>

Func jz4780_dma_desc_residue() expects the index to the next hw
descriptor as its last parameter. Caller func jz4780_dma_tx_status(),
however, applied modulus before passing it. When the current hw
descriptor was last in the list, the index passed became zero.

The resulting excess of reported residue especially caused problems
with cyclic DMA transfer clients, i.e. ALSA AIC audio output, which
rely on this for determining current DMA location within buffer.

Combined with the recent and related residue-reporting fixes, spurious
ALSA audio underruns on jz4770 hardware are now fixed.

Signed-off-by: Daniel Silsby <dansilsby@gmail.com>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 drivers/dma/dma-jz4780.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

 v2: No change

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 78849131c81d..b9db539a5b34 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -651,7 +651,7 @@ static enum dma_status jz4780_dma_tx_status(struct dma_chan *chan,
 					to_jz4780_dma_desc(vdesc), 0);
 	} else if (cookie == jzchan->desc->vdesc.tx.cookie) {
 		txstate->residue = jz4780_dma_desc_residue(jzchan, jzchan->desc,
-			  (jzchan->curr_hwdesc + 1) % jzchan->desc->count);
+					jzchan->curr_hwdesc + 1);
 	} else
 		txstate->residue = 0;
 
-- 
2.11.0

[PATCH v2 14/17] dmaengine: dma-jz4780: Use dma_set_residue()

[Paul Cercueil]

From: Daniel Silsby <dansilsby@gmail.com>

This is the standard method provided by dmaengine header.

Signed-off-by: Daniel Silsby <dansilsby@gmail.com>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 drivers/dma/dma-jz4780.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

 v2: No change

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index b9db539a5b34..ea17886031fa 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -637,6 +637,7 @@ static enum dma_status jz4780_dma_tx_status(struct dma_chan *chan,
 	struct virt_dma_desc *vdesc;
 	enum dma_status status;
 	unsigned long flags;
+	unsigned long residue = 0;
 
 	status = dma_cookie_status(chan, cookie, txstate);
 	if ((status == DMA_COMPLETE) || (txstate == NULL))
@@ -647,13 +648,13 @@ static enum dma_status jz4780_dma_tx_status(struct dma_chan *chan,
 	vdesc = vchan_find_desc(&jzchan->vchan, cookie);
 	if (vdesc) {
 		/* On the issued list, so hasn't been processed yet */
-		txstate->residue = jz4780_dma_desc_residue(jzchan,
+		residue = jz4780_dma_desc_residue(jzchan,
 					to_jz4780_dma_desc(vdesc), 0);
 	} else if (cookie == jzchan->desc->vdesc.tx.cookie) {
-		txstate->residue = jz4780_dma_desc_residue(jzchan, jzchan->desc,
+		residue = jz4780_dma_desc_residue(jzchan, jzchan->desc,
 					jzchan->curr_hwdesc + 1);
-	} else
-		txstate->residue = 0;
+	}
+	dma_set_residue(txstate, residue);
 
 	if (vdesc && jzchan->desc && vdesc == &jzchan->desc->vdesc
 	    && jzchan->desc->status & (JZ_DMA_DCS_AR | JZ_DMA_DCS_HLT))
-- 
2.11.0

[PATCH v2 15/17] MIPS: JZ4780: DTS: Update DMA node to match driver changes

[Paul Cercueil]

The driver now accepts two memory resources, the first one for the
channel-specific registers, the second one for the controller-specific
registers.

Note that older devicetrees, without this commit, will still work with
the jz4780-dma driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 arch/mips/boot/dts/ingenic/jz4780.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

 v2: Update info about devicetree ABI compatibility in commit message

diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index aa4e8f75ff5d..ad3b1f827cf5 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -247,7 +247,8 @@
 
 	dma: dma@13420000 {
 		compatible = "ingenic,jz4780-dma";
-		reg = <0x13420000 0x10000>;
+		reg = <0x13420000 0x400
+		       0x13421000 0x40>;
 		#dma-cells = <2>;
 
 		interrupt-parent = <&intc>;
-- 
2.11.0

[PATCH v2 16/17] MIPS: JZ4770: DTS: Add DMA nodes

[Paul Cercueil]

Add the two devicetree nodes for the two DMA cores of the JZ4770 SoC,
disabled by default, as currently there are no clients for the DMA
driver (until the MMC driver and/or others get a devicetree node).

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 arch/mips/boot/dts/ingenic/jz4770.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

 v2: No change

diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
index 7c2804f3f5f1..fda17beeb08b 100644
--- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -196,6 +196,36 @@
 		status = "disabled";
 	};
 
+	dmac0: jz4770-dma@13420000 {
+		compatible = "ingenic,jz4770-dma";
+		reg = <0x13420000 0xC0
+		       0x13420300 0x20>;
+
+		#dma-cells = <1>;
+
+		clocks = <&cgu JZ4770_CLK_DMA>;
+		interrupt-parent = <&intc>;
+		interrupts = <24>;
+
+		/* Disable dmac0 until we have something that uses it */
+		status = "disabled";
+	};
+
+	dmac1: jz4770-dma@13420100 {
+		compatible = "ingenic,jz4770-dma";
+		reg = <0x13420100 0xC0
+		       0x13420400 0x20>;
+
+		#dma-cells = <1>;
+
+		clocks = <&cgu JZ4770_CLK_DMA>;
+		interrupt-parent = <&intc>;
+		interrupts = <23>;
+
+		/* Disable dmac1 until we have something that uses it */
+		status = "disabled";
+	};
+
 	uhc: uhc@13430000 {
 		compatible = "generic-ohci";
 		reg = <0x13430000 0x1000>;
-- 
2.11.0

[PATCH v2 17/17] MIPS: JZ4740: DTS: Add DMA nodes

[Paul Cercueil]

Add the devicetree nodes for the DMA core of the JZ4740 SoC, disabled
by default, as currently there are no clients for the DMA driver
(until the MMC driver and/or others get a devicetree node).

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
---
 arch/mips/boot/dts/ingenic/jz4740.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

 v2: New patch in this series

diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
index 26c6b561d6f7..47d93f2597af 100644
--- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -154,6 +154,21 @@
 		clock-names = "baud", "module";
 	};
 
+	dmac: dma@13020000 {
+		compatible = "ingenic,jz4740-dma";
+		reg = <0x13020000 0xbc
+		       0x13020300 0x14>;
+		#dma-cells = <2>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <29>;
+
+		clocks = <&cgu JZ4740_CLK_DMA>;
+
+		/* Disable dmac until we have something that uses it */
+		status = "disabled";
+	};
+
 	uhc: uhc@13030000 {
 		compatible = "ingenic,jz4740-ohci", "generic-ohci";
 		reg = <0x13030000 0x1000>;
-- 
2.11.0

Re: [PATCH v2 00/17] JZ4780 DMA patchset v2

[Vinod]

On 18-07-18, 20:20, Paul Cercueil wrote:
> Hi,
> 
> This is the version 2 of my jz4780-dma driver update patchset.

why is this not send to dmaengine mailing list? Please post on that as
well

> 
> Changelog:
> 
> - All documentation changes have been moved to one single patch [01/17].
> 
> - The new patch [02/17] enforces that we're probed from devicetree.
> 
> - The driver will not fail if only one memory resource has been supplied
>   in the devicetree, to keep compatibility with old devicetree files.
> 
> - A new patch [17/17] adds a devicetree node for the DMA driver in the
>   JZ4740 DTS file.
> 
> - Some other small changes; see per-file changelog.
> 
> Regards,
> -Paul

-- 
~Vinod

Re: [PATCH v2 17/17] MIPS: JZ4740: DTS: Add DMA nodes

[Sergei Shtylyov]

On 7/18/2018 9:20 PM, Paul Cercueil wrote:

> Add the devicetree nodes for the DMA core of the JZ4740 SoC, disabled
> by default, as currently there are no clients for the DMA driver
> (until the MMC driver and/or others get a devicetree node).
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Tested-by: Mathieu Malaterre <malat@debian.org>
> ---
>   arch/mips/boot/dts/ingenic/jz4740.dtsi | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
> 
>   v2: New patch in this series
> 
> diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> index 26c6b561d6f7..47d93f2597af 100644
> --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> @@ -154,6 +154,21 @@
>   		clock-names = "baud", "module";
>   	};
>   
> +	dmac: dma@13020000 {

    The node must be named "dma-controller@13020000" according to the DT spec.

[...]

MBR, Sergei

Re: [PATCH v2 16/17] MIPS: JZ4770: DTS: Add DMA nodes

[Sergei Shtylyov]

On 7/18/2018 9:20 PM, Paul Cercueil wrote:

> Add the two devicetree nodes for the two DMA cores of the JZ4770 SoC,
> disabled by default, as currently there are no clients for the DMA
> driver (until the MMC driver and/or others get a devicetree node).
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Tested-by: Mathieu Malaterre <malat@debian.org>
> ---
>   arch/mips/boot/dts/ingenic/jz4770.dtsi | 30 ++++++++++++++++++++++++++++++
>   1 file changed, 30 insertions(+)
> 
>   v2: No change
> 
> diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> index 7c2804f3f5f1..fda17beeb08b 100644
> --- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> @@ -196,6 +196,36 @@
>   		status = "disabled";
>   	};
>   
> +	dmac0: jz4770-dma@13420000 {

	dmac0: dma-controller@13420000 {

[...]

> +	dmac1: jz4770-dma@13420100 {

	dmac1: dma-controller@13420100 {

[...]

MBR, Sergei