From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?q?Myl=C3=A8ne=20Josserand?= Subject: [PATCH v3 0/3] sun8i-a83t: Add touchscreen support on TBS A711 Date: Wed, 18 Jul 2018 20:27:16 +0200 Message-ID: <20180718182719.29663-1-mylene.josserand@bootlin.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: dmitry.torokhov@gmail.com, robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@bootlin.com, wens@csie.org Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, mylene.josserand@bootlin.com, thomas.petazzoni@bootlin.com List-Id: devicetree@vger.kernel.org Hello everyone, This is a V3 of the patch series that adds touchscreen support (FocalTech EDT-FT5x06 Polytouch) for TBS A711 (Allwinner sun8i-a83t SoC). Based on last master of linux-input tree. Since I can't test the suspend/resume functions there is no updates in this series about factory/normal mode. Changes since v2: - Remove the check if regulator is NULL (Dmitry Torokhov's review) - Add EPROBE_DEFER error not to print a error message (Lothar Waßmann's review) - Add set wake/reset on suspend/resume. Changes since v1: - Remove patches 01 and 02 as Chen-Yu Tsai sent a similar patch: https://patchwork.kernel.org/patch/10111431/ and it is merged on last next-20171222. (See commit f066f46ce5a5 "ARM: dts: sun8i: a83t: Add I2C device nodes and pinmux settings") - Update regulator according to Dmitry Torokhov's review: remove "optional" suffix while retrieving the regulator, rename it into "vcc" instead of "power" and add bindings documentation. - Update device tree according to Maxime Ripard's review: remove the label and rename the node. - Squash patch 03 with patch 05 to add I2C0 and touchscreen's node in one patch (see patch 02). Patch 01: Add support for regulator in the FocalTech touchscreen driver because A711 tablet is using a regulator to power-up the touchscreen. Patch 02: Add a set wake/reset values on resume and suspend. Patch 03: Add i2c0 and touchscreen's node for A711 TBS tablet. Thank you in advance for any review. Best regards, Mylène Mylène Josserand (3): Input: edt-ft5x06 - Add support for regulator Input: edt-ft5x06 - Set wake/reset values on resume/suspend arm: dts: sun8i: a83t: a711: Add touchscreen node .../bindings/input/touchscreen/edt-ft5x06.txt | 1 + arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 16 +++++++++ drivers/input/touchscreen/edt-ft5x06.c | 41 ++++++++++++++++++++++ 3 files changed, 58 insertions(+) -- 2.11.0