From: Simon Shields <simon@lineageos.org>
To: linux-leds@vger.kernel.org
Cc: Simon Shields <simon@lineageos.org>,
Jacek Anaszewski <jacek.anaszewski@gmail.com>,
Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 0/2] Panasonic AN30259A support
Date: Sun, 22 Jul 2018 00:12:25 +1000 [thread overview]
Message-ID: <20180721141228.2283-1-simon@lineageos.org> (raw)
Hi,
This patch series adds DT bindings (patch #1) and the corresponding driver
(patch #2) for the Panasonic AN30259A 3-channel LED driver. AN30259A
uses an internal clock for controlling brightness/on-off cycles, but
also supports using an external PWM/clock input. This patch series only
implements support for the former.
The AN30259A is connected using I2C, and the datasheet is freely
available[0].
Changes since v3:
* Rebased on v4.18-rc3.
* Drop unnecessary DUTYMAX/MID calculations when blinking:
previously I'd thought that the PWM duty values were expressed
as a percentage of the maximum current output, but in reality
they're a percentage of the current set in the LEDxCC registers.
This simplifies the code quite a bit.
* Corrected MODULE_LICENSE declaration.
* Return -EINVAL from set_blink if the blink rate is unsupported in
hardware.
* Fix more checkpatch --strict issues.
Changes since v2:
* Drop "an30259a:" prefix from bindings and add it in the device driver
instead.
* Use led-controller instead of leds for sample DT binding.
* Use ":indicator" instead of ":notification" in sample DT binding.
* Merge an30259a_led_set and an30259a_brightness to
an30259a_brightness_set (and same for blink functions).
* Explain the range limitations of the AN30259A's sloping mode
in the code - the AN30259A only has a 7-bit PWM range in slope mode,
and the bottom 3 bits are always set.
Changes since v1:
* Documentation formatting/grammar fixes.
* Use reg property instead of led-sources for leds.
* Add default-state support.
* Fix auto-probing when built as a module.
* Simplified DT parsing code.
* Use devm version of led_class_register().
* Fix LED naming scheme.
* Fixed checkpatch --strict issues.
Cheers,
Simon
[0]: https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf
Simon Shields (2):
dt-bindings: leds: document Panasonic AN30259A bindings
leds: add Panasonic AN30259A support
.../bindings/leds/leds-an30259a.txt | 43 +++
drivers/leds/Kconfig | 11 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-an30259a.c | 365 ++++++++++++++++++
4 files changed, 420 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-an30259a.txt
create mode 100644 drivers/leds/leds-an30259a.c
--
2.18.0
next reply other threads:[~2018-07-21 14:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-21 14:12 Simon Shields [this message]
2018-07-21 14:12 ` [PATCH v3 1/2] dt-bindings: leds: document Panasonic AN30259A bindings Simon Shields
2018-07-21 14:12 ` [PATCH v3 2/2] leds: add Panasonic AN30259A support Simon Shields
2018-07-26 7:44 ` Pavel Machek
2018-07-27 20:08 ` Jacek Anaszewski
2018-07-27 20:22 ` Jacek Anaszewski
-- strict thread matches above, loose matches on Subject: below --
2018-03-19 13:59 [PATCH v3 0/2] " Simon Shields
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180721141228.2283-1-simon@lineageos.org \
--to=simon@lineageos.org \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).