From: Vignesh R <vigneshr@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
linux-omap@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Vignesh R <vigneshr@ti.com>
Subject: [PATCH v3 4/4] pci: dwc: pci-dra7xx: Enable errata i870 for both EP and RC mode
Date: Tue, 24 Jul 2018 23:01:50 +0530 [thread overview]
Message-ID: <20180724173150.2701-5-vigneshr@ti.com> (raw)
In-Reply-To: <20180724173150.2701-1-vigneshr@ti.com>
Errata i870 is applicable in both EP and RC mode. Therefore rename
function dra7xx_pcie_ep_unaligned_memaccess(), that implements errata
workaround, to dra7xx_pcie_unaligned_memaccess() and call it from a
common place. So, that errata workaround is applied for both modes of
operation.
Reported-by: Chris Welch <Chris.Welch@viavisolutions.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
v3:
collect ACKs.
Fix s/appplied/applied.
drivers/pci/controller/dwc/pci-dra7xx.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index ce9224a36f62..43711561a199 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -542,7 +542,7 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
};
/*
- * dra7xx_pcie_ep_unaligned_memaccess: workaround for AM572x/AM571x Errata i870
+ * dra7xx_pcie_unaligned_memaccess: workaround for AM572x/AM571x Errata i870
* @dra7xx: the dra7xx device where the workaround should be applied
*
* Access to the PCIe slave port that are not 32-bit aligned will result
@@ -552,7 +552,7 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
*
* To avoid this issue set PCIE_SS1_AXI2OCP_LEGACY_MODE_ENABLE to 1.
*/
-static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
+static int dra7xx_pcie_unaligned_memaccess(struct device *dev)
{
int ret;
struct device_node *np = dev->of_node;
@@ -695,6 +695,10 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
if (dra7xx->link_gen < 0 || dra7xx->link_gen > 2)
dra7xx->link_gen = 2;
+ ret = dra7xx_pcie_unaligned_memaccess(dev);
+ if (ret)
+ dev_err(dev, "WA for Errata i870 not applied. Update DT\n");
+
switch (mode) {
case DW_PCIE_RC_TYPE:
if (!IS_ENABLED(CONFIG_PCI_DRA7XX_HOST)) {
@@ -717,10 +721,6 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
dra7xx_pcie_writel(dra7xx, PCIECTRL_TI_CONF_DEVICE_TYPE,
DEVICE_TYPE_EP);
- ret = dra7xx_pcie_ep_unaligned_memaccess(dev);
- if (ret)
- goto err_gpio;
-
ret = dra7xx_add_pcie_ep(dra7xx, pdev);
if (ret < 0)
goto err_gpio;
--
2.18.0
next prev parent reply other threads:[~2018-07-24 17:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-24 17:31 [PATCH v3 0/4] pci-dra7xx: Enable errata i870 workaround for RC mode Vignesh R
2018-07-24 17:31 ` [PATCH v3 1/4] dt-bindings: PCI: dra7xx: Add bindings for unaligned access in host mode Vignesh R
2018-07-24 17:31 ` [PATCH v3 2/4] ARM: dts: dra7: Enable workaround for errata i870 in PCIe " Vignesh R
2018-07-24 17:31 ` [PATCH v3 3/4] ARM: dts: dra7: Fix up unaligned access setting for PCIe EP Vignesh R
2018-07-24 17:31 ` Vignesh R [this message]
2018-08-08 16:57 ` [PATCH v3 0/4] pci-dra7xx: Enable errata i870 workaround for RC mode Lorenzo Pieralisi
2018-08-10 10:07 ` Vignesh R
2018-09-07 17:00 ` Tony Lindgren
2018-09-17 9:47 ` Lorenzo Pieralisi
2018-09-17 18:12 ` Vignesh R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180724173150.2701-5-vigneshr@ti.com \
--to=vigneshr@ti.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).