[PATCH v6 3/3] ARM: dts: at91: sama5d2 Xplained: add pin muxing for I2S

[Codrin Ciubotariu <codrin.ciubotariu@microchip.com>]

From: Cyrille Pitchen <cyrille.pitchen@atmel.com>

This patch sets the pin muxing for the I2S controllers

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
[codrin.ciubotariu@microchip.com: added pin muxing for the second
controller]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
---

Changes in v6:
	- none;

 arch/arm/boot/dts/at91-sama5d2_xplained.dts | 28 +++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index fcc85d70f36e..95cbec0f8790 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -281,6 +281,11 @@
 				status = "okay";
 			};
 
+			i2s0: i2s@f8050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s0_default>;
+			};
+
 			can0: can@f8054000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can0_default>;
@@ -424,6 +429,24 @@
 					bias-disable;
 				};
 
+				pinctrl_i2s0_default: i2s0_default {
+					pinmux = <PIN_PC1__I2SC0_CK>,
+						 <PIN_PC2__I2SC0_MCK>,
+						 <PIN_PC3__I2SC0_WS>,
+						 <PIN_PC4__I2SC0_DI0>,
+						 <PIN_PC5__I2SC0_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_i2s1_default: i2s1_default {
+					pinmux = <PIN_PA15__I2SC1_CK>,
+						 <PIN_PA14__I2SC1_MCK>,
+						 <PIN_PA16__I2SC1_WS>,
+						 <PIN_PA17__I2SC1_DI0>,
+						 <PIN_PA18__I2SC1_DO0>;
+					bias-disable;
+				};
+
 				pinctrl_key_gpio_default: key_gpio_default {
 					pinmux = <PIN_PB9__GPIO>;
 					bias-pull-up;
@@ -546,6 +569,11 @@
 				status = "okay";
 			};
 
+			i2s1: i2s@fc04c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s1_default>;
+			};
+
 			can1: can@fc050000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can1_default>;
-- 
2.17.1