From mboxrd@z Thu Jan 1 00:00:00 1970 From: Quentin Schulz Subject: [PATCH 4/4] dt-bindings: net: phy: mscc: vsc8531: factorize vsc8531,led-N-mode Date: Mon, 30 Jul 2018 15:02:36 +0200 Message-ID: <20180730130236.3837-4-quentin.schulz@bootlin.com> References: <20180730130236.3837-1-quentin.schulz@bootlin.com> Return-path: In-Reply-To: <20180730130236.3837-1-quentin.schulz@bootlin.com> Sender: netdev-owner@vger.kernel.org To: andrew@lunn.ch, f.fainelli@gmail.com, davem@davemloft.net, robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org Cc: netdev@vger.kernel.org, alexandre.belloni@bootlin.com, linux-kernel@vger.kernel.org, thomas.petazzoni@bootlin.com, Quentin Schulz List-Id: devicetree@vger.kernel.org VSC8584 supports 4 LEDs while VSC8531 only supports 2. Let's factorize the documentation for LED mode properties and give the 4 default values (the first two being shared between VSC8531 and VSC8584). Signed-off-by: Quentin Schulz --- .../devicetree/bindings/net/mscc-phy-vsc8531.txt | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt index 4c7d1d384df0..4d3f8b07a286 100644 --- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt @@ -22,14 +22,16 @@ Optional properties: 'vddmac'. Default value is 0%. Ref: Table:1 - Edge rate change (below). -- vsc8531,led-0-mode : LED mode. Specify how the LED[0] should behave. - Allowed values are define in +- vsc8531,led-[N]-mode : LED mode. Specify how the LED[N] should behave. + N depends on the number of LEDs supported by a + PHY. + Allowed values are defined in "include/dt-bindings/net/mscc-phy-vsc8531.h". - Default value is VSC8531_LINK_1000_ACTIVITY (1). -- vsc8531,led-1-mode : LED mode. Specify how the LED[1] should behave. - Allowed values are define in - "include/dt-bindings/net/mscc-phy-vsc8531.h". - Default value is VSC8531_LINK_100_ACTIVITY (2). + Default values are VSC8531_LINK_1000_ACTIVITY (1), + VSC8531_LINK_100_ACTIVITY (2), + VSC8531_LINK_ACTIVITY (0) and + VSC8531_DUPLEX_COLLISION (8). + Table: 1 - Edge rate change ----------------------------------------------------------------| -- 2.17.1