From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Belloni Subject: Re: [PATCH net-next 01/10] MIPS: mscc: ocelot: make HSIO registers address range a syscon Date: Tue, 31 Jul 2018 09:51:59 +0200 Message-ID: <20180731075159.GN28585@piout.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Quentin Schulz Cc: ralf@linux-mips.org, paul.burton@mips.com, jhogan@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, davem@davemloft.net, kishon@ti.com, andrew@lunn.ch, f.fainelli@gmail.com, linux-mips@linux-mips.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, allan.nielsen@microsemi.com, thomas.petazzoni@bootlin.com List-Id: devicetree@vger.kernel.org On 30/07/2018 14:43:46+0200, Quentin Schulz wrote: > HSIO contains registers for PLL5 configuration, SerDes/switch port > muxing and a thermal sensor, hence we can't keep it in the switch DT > node. > > Signed-off-by: Quentin Schulz Acked-by: Alexandre Belloni > --- > arch/mips/boot/dts/mscc/ocelot.dtsi | 14 +++++++++----- > 1 file changed, 9 insertions(+), 5 deletions(-) > > diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi > index afe8fc9..c51663a 100644 > --- a/arch/mips/boot/dts/mscc/ocelot.dtsi > +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi > @@ -96,7 +96,6 @@ > reg = <0x1010000 0x10000>, > <0x1030000 0x10000>, > <0x1080000 0x100>, > - <0x10d0000 0x10000>, > <0x11e0000 0x100>, > <0x11f0000 0x100>, > <0x1200000 0x100>, > @@ -110,10 +109,10 @@ > <0x1280000 0x100>, > <0x1800000 0x80000>, > <0x1880000 0x10000>; > - reg-names = "sys", "rew", "qs", "hsio", "port0", > - "port1", "port2", "port3", "port4", "port5", > - "port6", "port7", "port8", "port9", "port10", > - "qsys", "ana"; > + reg-names = "sys", "rew", "qs", "port0", "port1", > + "port2", "port3", "port4", "port5", "port6", > + "port7", "port8", "port9", "port10", "qsys", > + "ana"; > interrupts = <21 22>; > interrupt-names = "xtr", "inj"; > > @@ -220,5 +219,10 @@ > pinctrl-0 = <&miim1>; > status = "disabled"; > }; > + > + hsio: syscon@10d0000 { > + compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd"; > + reg = <0x10d0000 0x10000>; > + }; > }; > }; > -- > git-series 0.9.1 -- Alexandre Belloni, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com