From: Rob Herring <robh@kernel.org>
To: "Andreas Färber" <afaerber@suse.de>
Cc: linux-mips@linux-mips.org, Ralf Baechle <ralf@linux-mips.org>,
Paul Burton <paul.burton@mips.com>,
James Hogan <jhogan@kernel.org>,
linux-kernel@vger.kernel.org,
Govindraj Raja <Govindraj.Raja@imgtec.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 15/15] clk: pistachio: Fix wrong SDHost card speed
Date: Tue, 31 Jul 2018 15:21:54 -0600 [thread overview]
Message-ID: <20180731212154.GA17395@rob-hp-laptop> (raw)
In-Reply-To: <20180722212010.3979-16-afaerber@suse.de>
On Sun, Jul 22, 2018 at 11:20:10PM +0200, Andreas Färber wrote:
> From: Govindraj Raja <Govindraj.Raja@imgtec.com>
>
> The SDHost currently clocks the card 4x slower than it
> should do, because there is a fixed divide by 4 in the
> sdhost wrapper that is not present in the clock tree.
> To model this, add a fixed divide by 4 clock node in
> the SDHost clock path.
>
> This will ensure the right clock frequency is selected when
> the mmc driver tries to configure frequency on card insert.
>
> Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
> drivers/clk/pistachio/clk-pistachio.c | 3 ++-
> include/dt-bindings/clock/pistachio-clk.h | 1 +
> 2 files changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/pistachio/clk-pistachio.c b/drivers/clk/pistachio/clk-pistachio.c
> index c4ceb5eaf46c..1c968d9a6e17 100644
> --- a/drivers/clk/pistachio/clk-pistachio.c
> +++ b/drivers/clk/pistachio/clk-pistachio.c
> @@ -44,7 +44,7 @@ static struct pistachio_gate pistachio_gates[] __initdata = {
> GATE(CLK_AUX_ADC_INTERNAL, "aux_adc_internal", "sys_internal_div",
> 0x104, 22),
> GATE(CLK_AUX_ADC, "aux_adc", "aux_adc_div", 0x104, 23),
> - GATE(CLK_SD_HOST, "sd_host", "sd_host_div", 0x104, 24),
> + GATE(CLK_SD_HOST, "sd_host", "sd_host_div4", 0x104, 24),
> GATE(CLK_BT, "bt", "bt_div", 0x104, 25),
> GATE(CLK_BT_DIV4, "bt_div4", "bt_div4_div", 0x104, 26),
> GATE(CLK_BT_DIV8, "bt_div8", "bt_div8_div", 0x104, 27),
> @@ -54,6 +54,7 @@ static struct pistachio_gate pistachio_gates[] __initdata = {
> static struct pistachio_fixed_factor pistachio_ffs[] __initdata = {
> FIXED_FACTOR(CLK_WIFI_DIV4, "wifi_div4", "wifi_pll", 4),
> FIXED_FACTOR(CLK_WIFI_DIV8, "wifi_div8", "wifi_pll", 8),
> + FIXED_FACTOR(CLK_SDHOST_DIV4, "sd_host_div4", "sd_host_div", 4),
> };
>
> static struct pistachio_div pistachio_divs[] __initdata = {
> diff --git a/include/dt-bindings/clock/pistachio-clk.h b/include/dt-bindings/clock/pistachio-clk.h
> index 039f83facb68..77b92aed241d 100644
> --- a/include/dt-bindings/clock/pistachio-clk.h
> +++ b/include/dt-bindings/clock/pistachio-clk.h
> @@ -21,6 +21,7 @@
> /* Fixed-factor clocks */
> #define CLK_WIFI_DIV4 16
> #define CLK_WIFI_DIV8 17
> +#define CLK_SDHOST_DIV4 18
Does this clock really need to be exposed in DT?
>
> /* Gate clocks */
> #define CLK_MIPS 32
> --
> 2.16.4
>
prev parent reply other threads:[~2018-07-31 21:21 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-22 21:19 [PATCH 00/15] MIPS: pistachio: Creator Ci40 aka Marduk SPI-UART Andreas Färber
2018-07-22 21:19 ` [PATCH 01/15] MIPS: dts: img: pistachio_marduk: Reorder nodes Andreas Färber
2018-07-22 21:19 ` [PATCH 02/15] MIPS: dts: img: pistachio_marduk: Cleanups Andreas Färber
2018-07-22 21:19 ` [PATCH 03/15] MIPS: dts: img: pistachio: Rename spim0-clk pin node label Andreas Färber
2018-07-22 21:19 ` [PATCH 04/15] MIPS: dts: img: pistachio_marduk: Switch mmc to 1 bit mode Andreas Färber
2018-07-24 22:15 ` Andreas Färber
2018-07-22 21:20 ` [PATCH 05/15] MIPS: dts: img: pistachio_marduk: Enable SPIM0 Andreas Färber
2018-07-22 21:20 ` [PATCH 06/15] MIPS: dts: img: pistachio_marduk: Add 6Lowpan node Andreas Färber
2018-07-24 0:06 ` Paul Burton
2018-07-22 21:20 ` [PATCH 07/15] MIPS: dts: img: pistachio_marduk: Add SPI UART node Andreas Färber
2018-07-22 21:20 ` [PATCH 08/15] MIPS: dts: img: pistachio_marduk: Add user LEDs Andreas Färber
2018-07-22 21:20 ` [PATCH 15/15] clk: pistachio: Fix wrong SDHost card speed Andreas Färber
2018-07-25 23:43 ` Stephen Boyd
2018-07-31 21:21 ` Rob Herring [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180731212154.GA17395@rob-hp-laptop \
--to=robh@kernel.org \
--cc=Govindraj.Raja@imgtec.com \
--cc=afaerber@suse.de \
--cc=devicetree@vger.kernel.org \
--cc=jhogan@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=paul.burton@mips.com \
--cc=ralf@linux-mips.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox