From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Bhushan Shah <bshah@kde.org>
Cc: Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Brian Masney <masneyb@onstation.org>
Subject: Re: [PATCH] ARM: dts: qcom: msm8974-hammerhead: increase load on l20 for sdhci
Date: Tue, 31 Jul 2018 15:29:28 -0700 [thread overview]
Message-ID: <20180731222928.GA24465@builder> (raw)
In-Reply-To: <20180709091628.GA8854@orion>
On Mon 09 Jul 02:16 PDT 2018, Bhushan Shah wrote:
> The kernel would not boot on the hammerhead hardware due to the
> following error:
>
> mmc0: Timeout waiting for hardware interrupt.
> mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
> mmc0: sdhci: Sys addr: 0x00000200 | Version: 0x00003802
> mmc0: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000200
> mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000023
> mmc0: sdhci: Present: 0x03e80000 | Host ctl: 0x00000034
> mmc0: sdhci: Power: 0x00000001 | Blk gap: 0x00000000
> mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
> mmc0: sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
> mmc0: sdhci: Int enab: 0x02ff900b | Sig enab: 0x02ff100b
> mmc0: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
> mmc0: sdhci: Caps: 0x642dc8b2 | Caps_1: 0x00008007
> mmc0: sdhci: Cmd: 0x00000c1b | Max curr: 0x00000000
> mmc0: sdhci: Resp[0]: 0x00000c00 | Resp[1]: 0x00000000
> mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
> mmc0: sdhci: Host ctl2: 0x00000008
> mmc0: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x70040220
> mmc0: sdhci: ============================================
> mmc0: Card stuck in wrong state! mmcblk0 card_busy_detect status: 0xe00
> mmc0: cache flush error -110
> mmc0: Reset 0x1 never completed.
>
> This patch increases the load on l20 to 0.2 amps for the sdhci
> and allows the device to boot normally.
>
> Signed-off-by: Bhushan Shah <bshah@kde.org>
> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Tested-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> index 4dc0b347b1ee..c2dc9d09484a 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> @@ -189,6 +189,8 @@
> regulator-max-microvolt = <2950000>;
>
> regulator-boot-on;
> + regulator-system-load = <200000>;
> + regulator-allow-set-load;
> };
>
> l21 {
> --
> 2.17.1
>
prev parent reply other threads:[~2018-07-31 22:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-09 9:16 [PATCH] ARM: dts: qcom: msm8974-hammerhead: increase load on l20 for sdhci Bhushan Shah
2018-07-09 12:18 ` Bhushan Shah
2018-07-31 22:29 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180731222928.GA24465@builder \
--to=bjorn.andersson@linaro.org \
--cc=andy.gross@linaro.org \
--cc=bshah@kde.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=masneyb@onstation.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).