Re: [PATCH net-next 10/10] net: mscc: ocelot: make use of SerDes PHYs for handling their configuration

[Quentin Schulz <quentin.schulz@bootlin.com>]

[-- Attachment #1: Type: text/plain, Size: 1350 bytes --]

Hi Andrew,

On Mon, Jul 30, 2018 at 03:50:18PM +0200, Andrew Lunn wrote:
>  On Mon, Jul 30, 2018 at 02:43:55PM +0200, Quentin Schulz wrote:
> 
> > +		err = of_get_phy_mode(portnp);
> > +		if (err < 0)
> > +			ocelot->ports[port]->phy_mode = PHY_INTERFACE_MODE_NA;
> > +		else
> > +			ocelot->ports[port]->phy_mode = err;
> > +
> > +		if (ocelot->ports[port]->phy_mode == PHY_INTERFACE_MODE_NA)
> > +			continue;
> > +
> > +		if (ocelot->ports[port]->phy_mode == PHY_INTERFACE_MODE_SGMII)
> > +			phy_mode = PHY_MODE_SGMII;
> > +		else
> > +			phy_mode = PHY_MODE_QSGMII;
> 
> Hi Quentin
> 
> Say somebody puts RGMII as the phy-mode? It would be better to verify
> it is only SGMII or QSGMII and return -EINVAL otherwise.
> 

I'll replace this with a switch case to handle other cases.

> > +
> > +		serdes = devm_of_phy_get(ocelot->dev, portnp, NULL);
> > +		if (IS_ERR(serdes)) {
> > +			if (PTR_ERR(serdes) == -EPROBE_DEFER) {
> > +				dev_err(ocelot->dev, "deferring probe\n");
> 
> dev_dbg() ? It is not really an error.
> 

Ack.

> > +				err = -EPROBE_DEFER;
> > +				goto err_probe_ports;
> > +			}
> > +
> > +			dev_err(ocelot->dev, "missing SerDes phys for port%d\n",
> > +				port);
> > +			err = -ENODEV;
> 
> err = PTR_ERR(serdes) so we get the actual error?
> 

Ack.

Thanks,
Quentin

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]