From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brian Masney Subject: [PATCH v3 6/9] dt-bindings: iio: tsl2772: add bindings for regulator framework Date: Thu, 2 Aug 2018 20:18:57 -0400 Message-ID: <20180803001900.25371-7-masneyb@onstation.org> References: <20180803001900.25371-1-masneyb@onstation.org> Return-path: In-Reply-To: <20180803001900.25371-1-masneyb@onstation.org> Sender: linux-kernel-owner@vger.kernel.org To: jic23@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com, andy.gross@linaro.org, david.brown@linaro.org, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org Cc: jonathan@marek.ca, jmaneyrol@invensense.com, knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, mkelly@xevo.com, fischerdouglasc@gmail.com, bshah@kde.org, ctatlor97@gmail.com List-Id: devicetree@vger.kernel.org This patch adds device tree bindings to the tsl2772 driver for the regulator framework. Signed-off-by: Brian Masney --- Documentation/devicetree/bindings/iio/light/tsl2772.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.txt b/Documentation/devicetree/bindings/iio/light/tsl2772.txt index 6f33169344f2..4e7d98627cbf 100644 --- a/Documentation/devicetree/bindings/iio/light/tsl2772.txt +++ b/Documentation/devicetree/bindings/iio/light/tsl2772.txt @@ -21,6 +21,8 @@ Optional properties: are the only valid values. - led-max-microamp - current for the proximity LED. Must be 100000, 50000, 25000, or 13000. + - vdd-supply: phandle to the regulator that provides power to the sensor. + - vddio-supply: phandle to the regulator that provides power to the bus. - interrupts: the sole interrupt generated by the device Refer to interrupt-controller/interrupts.txt for generic interrupt client @@ -32,6 +34,8 @@ tsl2772@39 { compatible = "amstaos,tsl2772"; reg = <0x39>; interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; amstaos,proximity-diodes = <0>; led-max-microamp = <100000>; }; -- 2.17.1