From: Jonathan Cameron <jic23@kernel.org>
To: Brian Masney <masneyb@onstation.org>
Cc: robh+dt@kernel.org, mark.rutland@arm.com, andy.gross@linaro.org,
david.brown@linaro.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
jonathan@marek.ca, jmaneyrol@invensense.com, knaack.h@gmx.de,
lars@metafoo.de, pmeerw@pmeerw.net, mkelly@xevo.com,
fischerdouglasc@gmail.com, bshah@kde.org, ctatlor97@gmail.com
Subject: Re: [PATCH v3 5/9] iio: tsl2772: add support for regulator framework
Date: Fri, 3 Aug 2018 22:50:17 +0100 [thread overview]
Message-ID: <20180803225017.06ac1d3b@archlinux> (raw)
In-Reply-To: <20180803001900.25371-6-masneyb@onstation.org>
On Thu, 2 Aug 2018 20:18:56 -0400
Brian Masney <masneyb@onstation.org> wrote:
> This patch adds support for the regulator framework to the tsl2772
> driver. Driver was tested using a LG Nexus 5 (hammerhead) phone with
> the two regulators and on a Raspberry Pi 2 without any regulators
> controlling the power to the sensor.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
This looks fine, but will wait for the precursors.
Jonathan
> ---
> drivers/iio/light/tsl2772.c | 95 ++++++++++++++++++++++++++++++++++++-
> 1 file changed, 94 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
> index ae00edf0d87e..4a11bf77a4d0 100644
> --- a/drivers/iio/light/tsl2772.c
> +++ b/drivers/iio/light/tsl2772.c
> @@ -20,6 +20,7 @@
> #include <linux/iio/iio.h>
> #include <linux/iio/sysfs.h>
> #include <linux/platform_data/tsl2772.h>
> +#include <linux/regulator/consumer.h>
>
> /* Cal defs */
> #define PROX_STAT_CAL 0
> @@ -109,6 +110,9 @@
>
> #define TSL2772_MAX_PROX_LEDS 2
>
> +#define TSL2772_BOOT_MIN_SLEEP_TIME 10000
> +#define TSL2772_BOOT_MAX_SLEEP_TIME 28000
> +
> /* Device family members */
> enum {
> tsl2571,
> @@ -156,6 +160,8 @@ struct tsl2772_chip {
> struct mutex prox_mutex;
> struct mutex als_mutex;
> struct i2c_client *client;
> + struct regulator *vdd_supply;
> + struct regulator *vddio_supply;
> u16 prox_data;
> struct tsl2772_als_info als_cur_info;
> struct tsl2772_settings settings;
> @@ -676,6 +682,52 @@ static int tsl2772_als_calibrate(struct iio_dev *indio_dev)
> return ret;
> }
>
> +static void tsl2772_disable_regulators_action(void *_data)
> +{
> + struct tsl2772_chip *chip = _data;
> +
> + regulator_disable(chip->vdd_supply);
> + regulator_disable(chip->vddio_supply);
> +}
> +
> +static int tsl2772_enable_regulator(struct tsl2772_chip *chip,
> + struct regulator *regulator)
> +{
> + int ret;
> +
> + ret = regulator_enable(regulator);
> + if (ret < 0) {
> + dev_err(&chip->client->dev, "Failed to enable regulator: %d\n",
> + ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static struct regulator *tsl2772_get_regulator(struct tsl2772_chip *chip,
> + char *name)
> +{
> + struct regulator *regulator;
> + int ret;
> +
> + regulator = devm_regulator_get(&chip->client->dev, name);
> + if (IS_ERR(regulator)) {
> + if (PTR_ERR(regulator) != -EPROBE_DEFER)
> + dev_err(&chip->client->dev,
> + "Failed to get %s regulator %d\n",
> + name, (int)PTR_ERR(regulator));
> +
> + return regulator;
> + }
> +
> + ret = tsl2772_enable_regulator(chip, regulator);
> + if (ret < 0)
> + return ERR_PTR(ret);
> +
> + return regulator;
> +}
> +
> static int tsl2772_chip_on(struct iio_dev *indio_dev)
> {
> struct tsl2772_chip *chip = iio_priv(indio_dev);
> @@ -1733,6 +1785,27 @@ static int tsl2772_probe(struct i2c_client *clientp,
> chip->client = clientp;
> i2c_set_clientdata(clientp, indio_dev);
>
> + chip->vddio_supply = tsl2772_get_regulator(chip, "vddio");
> + if (IS_ERR(chip->vddio_supply))
> + return PTR_ERR(chip->vddio_supply);
> +
> + chip->vdd_supply = tsl2772_get_regulator(chip, "vdd");
> + if (IS_ERR(chip->vdd_supply)) {
> + regulator_disable(chip->vddio_supply);
> + return PTR_ERR(chip->vdd_supply);
> + }
> +
> + ret = devm_add_action(&clientp->dev, tsl2772_disable_regulators_action,
> + chip);
> + if (ret < 0) {
> + tsl2772_disable_regulators_action(chip);
> + dev_err(&clientp->dev, "Failed to setup regulator cleanup action %d\n",
> + ret);
> + return ret;
> + }
> +
> + usleep_range(TSL2772_BOOT_MIN_SLEEP_TIME, TSL2772_BOOT_MAX_SLEEP_TIME);
> +
> ret = i2c_smbus_read_byte_data(chip->client,
> TSL2772_CMD_REG | TSL2772_CHIPID);
> if (ret < 0)
> @@ -1806,13 +1879,33 @@ static int tsl2772_probe(struct i2c_client *clientp,
> static int tsl2772_suspend(struct device *dev)
> {
> struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct tsl2772_chip *chip = iio_priv(indio_dev);
> + int ret;
>
> - return tsl2772_chip_off(indio_dev);
> + ret = tsl2772_chip_off(indio_dev);
> + regulator_disable(chip->vdd_supply);
> + regulator_disable(chip->vddio_supply);
> +
> + return ret;
> }
>
> static int tsl2772_resume(struct device *dev)
> {
> struct iio_dev *indio_dev = dev_get_drvdata(dev);
> + struct tsl2772_chip *chip = iio_priv(indio_dev);
> + int ret;
> +
> + ret = tsl2772_enable_regulator(chip, chip->vddio_supply);
> + if (ret < 0)
> + return ret;
> +
> + ret = tsl2772_enable_regulator(chip, chip->vdd_supply);
> + if (ret < 0) {
> + regulator_disable(chip->vddio_supply);
> + return ret;
> + }
> +
> + usleep_range(TSL2772_BOOT_MIN_SLEEP_TIME, TSL2772_BOOT_MAX_SLEEP_TIME);
>
> return tsl2772_chip_on(indio_dev);
> }
next prev parent reply other threads:[~2018-08-03 21:50 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-03 0:18 [PATCH v3 0/9] treewide: add support for various sensors on the LG Nexus 5 (hammerhead) Brian Masney
2018-08-03 0:18 ` [PATCH v3 1/9] iio: imu: mpu6050: add support for regulator framework Brian Masney
2018-08-03 21:44 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 2/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515 Brian Masney
2018-08-03 21:46 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 3/9] iio: tsl2772: add support for reading proximity led settings from device tree Brian Masney
2018-08-18 17:04 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 4/9] dt-bindings: iio: tsl2772: add new bindings Brian Masney
2018-08-03 21:48 ` Jonathan Cameron
2018-08-07 16:54 ` Rob Herring
2018-08-18 17:01 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 5/9] iio: tsl2772: add support for regulator framework Brian Masney
2018-08-03 21:50 ` Jonathan Cameron [this message]
2018-08-03 0:18 ` [PATCH v3 6/9] dt-bindings: iio: tsl2772: add bindings " Brian Masney
2018-08-03 21:51 ` Jonathan Cameron
2018-08-07 17:20 ` Rob Herring
2018-08-18 17:02 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 7/9] iio: tsl2772: add support for avago,apds9930 Brian Masney
2018-08-03 21:53 ` Jonathan Cameron
2018-08-18 17:07 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 8/9] dt-bindings: iio: tsl2772: add binding " Brian Masney
2018-08-03 21:54 ` Jonathan Cameron
2018-08-07 17:21 ` Rob Herring
2018-08-18 17:06 ` Jonathan Cameron
2018-08-03 0:19 ` [PATCH v3 9/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity Brian Masney
2018-08-18 17:09 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180803225017.06ac1d3b@archlinux \
--to=jic23@kernel.org \
--cc=andy.gross@linaro.org \
--cc=bshah@kde.org \
--cc=ctatlor97@gmail.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=fischerdouglasc@gmail.com \
--cc=jmaneyrol@invensense.com \
--cc=jonathan@marek.ca \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=masneyb@onstation.org \
--cc=mkelly@xevo.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).