From: Jonathan Cameron <jic23@kernel.org>
To: Brian Masney <masneyb@onstation.org>
Cc: robh+dt@kernel.org, mark.rutland@arm.com, andy.gross@linaro.org,
david.brown@linaro.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
jonathan@marek.ca, jmaneyrol@invensense.com, knaack.h@gmx.de,
lars@metafoo.de, pmeerw@pmeerw.net, mkelly@xevo.com,
fischerdouglasc@gmail.com, bshah@kde.org, ctatlor97@gmail.com
Subject: Re: [PATCH v3 7/9] iio: tsl2772: add support for avago,apds9930
Date: Fri, 3 Aug 2018 22:53:36 +0100 [thread overview]
Message-ID: <20180803225336.6cb5d581@archlinux> (raw)
In-Reply-To: <20180803001900.25371-8-masneyb@onstation.org>
On Thu, 2 Aug 2018 20:18:58 -0400
Brian Masney <masneyb@onstation.org> wrote:
> The Avago APDS9930 has the same register set as the TAOS/AMS TSL2772 so
> this patch adds the correct bindings and the appropriate LUX table
> values derived from the values in the datasheet. Driver was tested on a
> LG Nexus 5 (hammerhead) phone.
>
> avago,apds9930 datasheet:
> https://www.mouser.com/datasheet/2/678/avago_AV02-3190EN_DS_APDS-9930_2014-03-25[1]-1217273.pdf
>
> tsl2772 datasheet:
> https://ams.com/eng/content/download/291503/1066377/file/TSL2772_DS000181_2-00.pdf
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
Glad you noticed they were the same. will apply once precursors are in.
Thanks,
Jonathan
> ---
> drivers/iio/light/tsl2772.c | 18 ++++++++++++++++--
> 1 file changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
> index 4a11bf77a4d0..83cece921843 100644
> --- a/drivers/iio/light/tsl2772.c
> +++ b/drivers/iio/light/tsl2772.c
> @@ -124,7 +124,8 @@ enum {
> tsl2672,
> tmd2672,
> tsl2772,
> - tmd2772
> + tmd2772,
> + apds9930,
> };
>
> enum {
> @@ -213,6 +214,12 @@ static const struct tsl2772_lux tmd2x72_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
> { 0, 0 },
> };
>
> +static const struct tsl2772_lux apds9930_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
> + { 52000, 96824 },
> + { 38792, 67132 },
> + { 0, 0 },
> +};
> +
> static const struct tsl2772_lux *tsl2772_default_lux_table_group[] = {
> [tsl2571] = tsl2x71_lux_table,
> [tsl2671] = tsl2x71_lux_table,
> @@ -224,6 +231,7 @@ static const struct tsl2772_lux *tsl2772_default_lux_table_group[] = {
> [tmd2672] = tmd2x72_lux_table,
> [tsl2772] = tsl2x72_lux_table,
> [tmd2772] = tmd2x72_lux_table,
> + [apds9930] = apds9930_lux_table,
> };
>
> static const struct tsl2772_settings tsl2772_default_settings = {
> @@ -274,6 +282,7 @@ static const int tsl2772_int_time_avail[][6] = {
> [tmd2672] = { 0, 2730, 0, 2730, 0, 699000 },
> [tsl2772] = { 0, 2730, 0, 2730, 0, 699000 },
> [tmd2772] = { 0, 2730, 0, 2730, 0, 699000 },
> + [apds9930] = { 0, 2730, 0, 2730, 0, 699000 },
> };
>
> static int tsl2772_int_calibscale_avail[] = { 1, 8, 16, 120 };
> @@ -299,7 +308,8 @@ static const u8 device_channel_config[] = {
> [tsl2672] = PRX2,
> [tmd2672] = PRX2,
> [tsl2772] = ALSPRX2,
> - [tmd2772] = ALSPRX2
> + [tmd2772] = ALSPRX2,
> + [apds9930] = ALSPRX2,
> };
>
> static int tsl2772_read_status(struct tsl2772_chip *chip)
> @@ -513,6 +523,7 @@ static int tsl2772_get_prox(struct iio_dev *indio_dev)
> case tmd2672:
> case tsl2772:
> case tmd2772:
> + case apds9930:
> if (!(ret & TSL2772_STA_PRX_VALID)) {
> ret = -EINVAL;
> goto prox_poll_err;
> @@ -1393,6 +1404,7 @@ static int tsl2772_device_id_verif(int id, int target)
> case tmd2672:
> case tsl2772:
> case tmd2772:
> + case apds9930:
> return (id & 0xf0) == SWORDFISH_ID;
> }
>
> @@ -1932,6 +1944,7 @@ static const struct i2c_device_id tsl2772_idtable[] = {
> { "tmd2672", tmd2672 },
> { "tsl2772", tsl2772 },
> { "tmd2772", tmd2772 },
> + { "apds9930", apds9930},
> {}
> };
>
> @@ -1948,6 +1961,7 @@ static const struct of_device_id tsl2772_of_match[] = {
> { .compatible = "amstaos,tmd2672" },
> { .compatible = "amstaos,tsl2772" },
> { .compatible = "amstaos,tmd2772" },
> + { .compatible = "avago,apds9930" },
> {}
> };
> MODULE_DEVICE_TABLE(of, tsl2772_of_match);
next prev parent reply other threads:[~2018-08-03 21:53 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-03 0:18 [PATCH v3 0/9] treewide: add support for various sensors on the LG Nexus 5 (hammerhead) Brian Masney
2018-08-03 0:18 ` [PATCH v3 1/9] iio: imu: mpu6050: add support for regulator framework Brian Masney
2018-08-03 21:44 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 2/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515 Brian Masney
2018-08-03 21:46 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 3/9] iio: tsl2772: add support for reading proximity led settings from device tree Brian Masney
2018-08-18 17:04 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 4/9] dt-bindings: iio: tsl2772: add new bindings Brian Masney
2018-08-03 21:48 ` Jonathan Cameron
2018-08-07 16:54 ` Rob Herring
2018-08-18 17:01 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 5/9] iio: tsl2772: add support for regulator framework Brian Masney
2018-08-03 21:50 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 6/9] dt-bindings: iio: tsl2772: add bindings " Brian Masney
2018-08-03 21:51 ` Jonathan Cameron
2018-08-07 17:20 ` Rob Herring
2018-08-18 17:02 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 7/9] iio: tsl2772: add support for avago,apds9930 Brian Masney
2018-08-03 21:53 ` Jonathan Cameron [this message]
2018-08-18 17:07 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 8/9] dt-bindings: iio: tsl2772: add binding " Brian Masney
2018-08-03 21:54 ` Jonathan Cameron
2018-08-07 17:21 ` Rob Herring
2018-08-18 17:06 ` Jonathan Cameron
2018-08-03 0:19 ` [PATCH v3 9/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity Brian Masney
2018-08-18 17:09 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180803225336.6cb5d581@archlinux \
--to=jic23@kernel.org \
--cc=andy.gross@linaro.org \
--cc=bshah@kde.org \
--cc=ctatlor97@gmail.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=fischerdouglasc@gmail.com \
--cc=jmaneyrol@invensense.com \
--cc=jonathan@marek.ca \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=masneyb@onstation.org \
--cc=mkelly@xevo.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).