From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tali Perry Subject: [PATCH v2 0/2] i2c: npcm7xx: new driver for I2C controller Date: Tue, 7 Aug 2018 13:38:12 +0300 Message-ID: <20180807103814.29586-1-tali.perry1@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: sboyd@kernel.org, brendanhiggins@google.com, robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, weiyongjunl@huawei.com, avifishman70@gmail.com, tmaimon77@gmail.com, raltherr@google.com Cc: devicetree@vger.kernel.org, openbmc@lists.ozlabs.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Tali Perry List-Id: devicetree@vger.kernel.org Nuvoton NPCM7XX I2C Controller NPCM7xx includes 16 I2C contollers. THis driver operates the controller. This module also includes a slave mode, which will be submitted later on. Any feedback would be appreciated. v2 -> v1: - run check patch in strict mode. - use linux crc. - define regs in constant offset without base. - remove debug prints. - no declerations for local functions. v1: initial version Signed-off-by: Tali Perry --- Tali Perry (2): dt-binding: i2c: npcm7xx: add binding for i2c controller i2c: npcm7xx: add i2c controller master mode only .../devicetree/bindings/i2c/i2c-npcm7xx.txt | 27 + MAINTAINERS | 8 + drivers/i2c/busses/Kconfig | 11 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-npcm7xx.c | 2017 ++++++++++++++++++++ 5 files changed, 2064 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-npcm7xx.txt create mode 100644 drivers/i2c/busses/i2c-npcm7xx.c -- 2.14.1