From mboxrd@z Thu Jan 1 00:00:00 1970 From: Christoph Hellwig Subject: [PATCH v4 2/3] dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller Date: Thu, 9 Aug 2018 09:56:01 +0200 Message-ID: <20180809075602.989-3-hch@lst.de> References: <20180809075602.989-1-hch@lst.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180809075602.989-1-hch@lst.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-riscv" Errors-To: linux-riscv-bounces+glpr-linux-riscv=m.gmane.org@lists.infradead.org To: tglx@linutronix.de, palmer@sifive.com, jason@lakedaemon.net, marc.zyngier@arm.com, robh+dt@kernel.org, mark.rutland@arm.com Cc: devicetree@vger.kernel.org, aou@eecs.berkeley.edu, anup@brainfault.org, linux-kernel@vger.kernel.org, atish.patra@wdc.com, Palmer Dabbelt , linux-riscv@lists.infradead.org, shorne@gmail.com List-Id: devicetree@vger.kernel.org From: Palmer Dabbelt Add documentation for the SiFive implementation of the RISC-V Platform Level Interrupt Controller (PLIC). The PLIC connects global interrupt sources to the local interrupt controller on each hart. Signed-off-by: Palmer Dabbelt [hch: various fixes and updates] Signed-off-by: Christoph Hellwig --- .../interrupt-controller/sifive,plic.txt | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/sifive,plic.txt diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic.txt b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic.txt new file mode 100644 index 000000000000..fe7ccd944c12 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic.txt @@ -0,0 +1,58 @@ +SiFive Platform-Level Interrupt Controller (PLIC) +------------------------------------------------- + +SiFive SOCs include an implementation of the Platform-Level Interrupt Controller +(PLIC) high-level specification in the RISC-V Privileged Architecture +specification. The PLIC connects all external interrupts in the system to all +hart contexts in the system, via the external interrupt source in each hart. + +A hart context is a privilege mode in a hardware execution thread. For example, +in an 4 core system with 2-way SMT, you have 8 harts and probably at least two +privilege modes per hart; machine mode and supervisor mode. + +Each interrupt can be enabled on per-context basis. Any context can claim +a pending enabled interrupt and then release it once it has been handled. + +Each interrupt has a configurable priority. Higher priority interrupts are +serviced first. Each context can specify a priority threshold. Interrupts +with priority below this threshold will not cause the PLIC to raise its +interrupt line leading to the context. + +While the PLIC supports both edge-triggered and level-triggered interrupts, +interrupt handlers are oblivious to this distinction and therefore it is not +specified in the PLIC device-tree binding. + +While the RISC-V ISA doesn't specify a memory layout for the PLIC, the +"sifive,plic" device is a concrete implementation of the PLIC that contains a +specific memory layout, which is documented in chapter 8 of the SiFive U5 +Coreplex Series Manual . + +Required properties: +- compatible : "sifive,plic" and a string identifying the actual detailed + implementation in case that specific bugs need to be worked around. +- #address-cells : should be <0> or more. +- #interrupt-cells : should be <1> or more. +- interrupt-controller : Identifies the node as an interrupt controller. +- reg : Should contain 1 register range (address and length). +- interrupts-extended : Specifies which contexts are connected to the PLIC, + with "-1" specifying that a context is not present. Each node pointed + to should be a riscv,cpu-intc node, which has a riscv node as parent. +- riscv,ndev: Specifies how many external interrupts are supported by + this controller. + +Example: + + plic: interrupt-controller@c000000 { + #address-cells = <0>; + #interrupt-cells = <1>; + compatible = "riscv,plic", "sifive,fu540-c000-plic"; + interrupt-controller; + interrupts-extended = < + &cpu0-intc 11 + &cpu1-intc 11 &cpu1-intc 9 + &cpu2-intc 11 &cpu2-intc 9 + &cpu3-intc 11 &cpu3-intc 9 + &cpu4-intc 11 &cpu4-intc 9>; + reg = <0xc000000 0x4000000>; + riscv,ndev = <10>; + }; -- 2.18.0